Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.debian.user > #158373 > unrolled thread

need help on mtp config

Started byLi Wei <rootof3@yahoo.com>
First post2015-09-28 14:30 +0200
Last post2015-09-28 22:10 +0200
Articles 5 — 3 participants

Back to article view | Back to linux.debian.user


Contents

  need help on mtp config Li Wei <rootof3@yahoo.com> - 2015-09-28 14:30 +0200
    Re: need help on mtp config Sven Arvidsson <sa@whiz.se> - 2015-09-28 14:40 +0200
      Re: need help on mtp config Li Wei <rootof3@yahoo.com> - 2015-09-28 16:20 +0200
    Re: need help on mtp config Darac Marjal <mailinglist@darac.org.uk> - 2015-09-28 16:40 +0200
      Re: need help on mtp config Li Wei <rootof3@yahoo.com> - 2015-09-28 22:10 +0200

#158373 — need help on mtp config

FromLi Wei <rootof3@yahoo.com>
Date2015-09-28 14:30 +0200
Subjectneed help on mtp config
Message-ID<qdFJ8-5CT-9@gated-at.bofh.it>
I have Samsung GT-S7572 cell phone
and connect to debian by usb line, lsusb:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 25a7:2402  
Bus 001 Device 004: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-P7500 [Galaxy Tab 10.1]

then I run mtp-detect as root:

Device 0 (VID=04e8 and PID=6860) is a Samsung GT P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab 7.7/10.1/S2/S3/Nexus/Note/Y.
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
libmtp version: 1.1.3

Listing raw device(s)
   Found 1 device(s):
   Samsung: GT P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab 7.7/10.1/S2/S3/Nexus/Note/Y (04e8:6860) @ bus 1, dev 4
Attempting to connect device(s)
OK.

then what should I do next?
do I have to upgrade from wheezy to jessie?
Thanks!!!

[toc] | [next] | [standalone]


#158375

FromSven Arvidsson <sa@whiz.se>
Date2015-09-28 14:40 +0200
Message-ID<qdFSO-5O5-17@gated-at.bofh.it>
In reply to#158373

[Multipart message — attachments visible in raw view] — view raw

On Mon, 2015-09-28 at 05:24 -0700, Li Wei wrote:
> Device 0 (VID=04e8 and PID=6860) is a Samsung GT
> P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab
> 7.7/10.1/S2/S3/Nexus/Note/Y.
> PTP_ERROR_IO: failed to open session, trying again after resetting
> USB interface
> LIBMTP libusb: Attempt to reset device
> LIBMTP PANIC: failed to open session on second attempt
> Unable to open raw device 0
> libmtp version: 1.1.3


Try this:

https://bbs.archlinux.org/viewtopic.php?pid=1121607#p1121607

Also, make sure that the phone is unlocked, it can't be mounted if
locked!

-- 
Cheers,
Sven Arvidsson
http://www.whiz.se
PGP Key ID 6FAB5CD5



[toc] | [prev] | [next] | [standalone]


#158376

FromLi Wei <rootof3@yahoo.com>
Date2015-09-28 16:20 +0200
Message-ID<qdHrA-1Q9-3@gated-at.bofh.it>
In reply to#158375
Thanks, but I haven't been able to find  relevant info from site:
 https://bbs.archlinux.org/viewtopic.php?pid=1121607#p1121607

Could you be more specific? Thanks!!

--------------------------------------------
On Mon, 9/28/15, Sven Arvidsson <sa@whiz.se> wrote:

 Subject: Re: need help on mtp config
 To: debian-user@lists.debian.org
 Date: Monday, September 28, 2015, 8:27 AM
 
 
 Try this:
 
 https://bbs.archlinux.org/viewtopic.php?pid=1121607#p1121607
 
 Also, make sure that the phone
 is unlocked, it can't be mounted if
 locked!
 
 -- 
 Cheers,
 Sven Arvidsson
 http://www.whiz.se
 PGP
 Key ID 6FAB5CD5
 
 
 

[toc] | [prev] | [next] | [standalone]


#158378

FromDarac Marjal <mailinglist@darac.org.uk>
Date2015-09-28 16:40 +0200
Message-ID<qdHKW-2co-17@gated-at.bofh.it>
In reply to#158373

[Multipart message — attachments visible in raw view] — view raw

On Mon, Sep 28, 2015 at 05:24:01AM -0700, Li Wei wrote:
> I have Samsung GT-S7572 cell phone
> and connect to debian by usb line, lsusb:
> 
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 002: ID 25a7:2402  
> Bus 001 Device 004: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-P7500 [Galaxy Tab 10.1]
> 
> then I run mtp-detect as root:
> 
> Device 0 (VID=04e8 and PID=6860) is a Samsung GT P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab 7.7/10.1/S2/S3/Nexus/Note/Y.

This means that the device is running normally (i.e. not in bootloader 
etc mode), and that your computer detected it.

> PTP_ERROR_IO: failed to open session, trying again after resetting USB interface

This probably means that the device isn't in PTP mode.

> LIBMTP libusb: Attempt to reset device
> LIBMTP PANIC: failed to open session on second attempt

And this probably means that the device isn't in MTP mode.

According to the Samsung Website, when connected, you should see a 
notification on your device "Connected as a ....". Tap this to bring up 
the USB Storage settings. Tap "Media Device (MTP)" to use MTP mode.  

> Unable to open raw device 0
> libmtp version: 1.1.3
> 
> Listing raw device(s)
>    Found 1 device(s):
>    Samsung: GT P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab 7.7/10.1/S2/S3/Nexus/Note/Y (04e8:6860) @ bus 1, dev 4
> Attempting to connect device(s)
> OK.
> 
> then what should I do next?
> do I have to upgrade from wheezy to jessie?
> Thanks!!!
> 

-- 
For more information, please reread.

[toc] | [prev] | [next] | [standalone]


#158396

FromLi Wei <rootof3@yahoo.com>
Date2015-09-28 22:10 +0200
Message-ID<qdMUi-1fb-13@gated-at.bofh.it>
In reply to#158378
Thanks!
I do see a notification on your device "Connected as
a media device", then it says sth. like can't find software
and suggests I install kies

--------------------------------------------
On Mon, 9/28/15, Darac Marjal <mailinglist@darac.org.uk> wrote:

 Subject: Re: need help on mtp config
 To: debian-user@lists.debian.org
 Date: Monday, September 28, 2015, 10:33 AM
 
 On Mon, Sep 28, 2015 at
 05:24:01AM -0700, Li Wei wrote:
 > I have
 Samsung GT-S7572 cell phone
 > and connect
 to debian by usb line, lsusb:
 > 
 > Bus 001 Device 001: ID 1d6b:0002 Linux
 Foundation 2.0 root hub
 > Bus 002 Device
 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 > Bus 003 Device 001: ID 1d6b:0001 Linux
 Foundation 1.1 root hub
 > Bus 004 Device
 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 > Bus 005 Device 001: ID 1d6b:0001 Linux
 Foundation 1.1 root hub
 > Bus 004 Device
 002: ID 25a7:2402  
 > Bus 001 Device
 004: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100
 Phone [Galaxy S II], GT-P7500 [Galaxy Tab 10.1]
 > 
 > then I run
 mtp-detect as root:
 > 
 > Device 0 (VID=04e8 and PID=6860) is a
 Samsung GT P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab
 7.7/10.1/S2/S3/Nexus/Note/Y.
 
 This means that the device is running normally
 (i.e. not in bootloader 
 etc mode), and that
 your computer detected it.
 
 > PTP_ERROR_IO: failed to open session,
 trying again after resetting USB interface
 
 This probably means that the
 device isn't in PTP mode.
 
 > LIBMTP libusb: Attempt to reset device
 > LIBMTP PANIC: failed to open session on
 second attempt
 
 And this
 probably means that the device isn't in MTP mode.
 
 According to the Samsung
 Website, when connected, you should see a 
 notification on your device "Connected as
 a ....". Tap this to bring up 
 the USB
 Storage settings. Tap "Media Device (MTP)" to use
 MTP mode.  
 
 > Unable to open raw device
 0
 > libmtp version: 1.1.3
 > 
 > Listing raw
 device(s)
 >    Found 1 device(s):
 >    Samsung: GT
 P7310/P7510/N7000/I9070/I9100/I9300 Galaxy Tab
 7.7/10.1/S2/S3/Nexus/Note/Y (04e8:6860) @ bus 1, dev 4
 > Attempting to connect device(s)
 > OK.
 > 
 > then what should I do next?
 > do I have to upgrade from wheezy to
 jessie?
 > Thanks!!!
 > 
 
 -- 
 For more information, please
 reread.

[toc] | [prev] | [standalone]


Back to top | Article view | linux.debian.user


csiph-web