Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #162000 > unrolled thread
| Started by | Staszek <stf.list.other@eisenbits.com> |
|---|---|
| First post | 2015-12-22 21:40 +0100 |
| Last post | 2015-12-24 15:50 +0100 |
| Articles | 12 — 6 participants |
Back to article view | Back to linux.debian.user
random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Staszek <stf.list.other@eisenbits.com> - 2015-12-22 21:40 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Anders Andersson <pipatron@gmail.com> - 2015-12-22 22:20 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Staszek <stf.list.other@eisenbits.com> - 2015-12-24 14:10 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Neil Roberts <neilr@matrixscience.com> - 2015-12-24 15:00 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Sven Arvidsson <sa@whiz.se> - 2015-12-24 15:10 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Anders Andersson <pipatron@gmail.com> - 2015-12-24 20:30 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Staszek <stf.list.other@eisenbits.com> - 2015-12-25 03:30 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Charlie Kravetz <cjk@teamcharliesangels.com> - 2015-12-25 04:10 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Sven Arvidsson <sa@whiz.se> - 2015-12-25 15:50 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Staszek <stf.list.other@eisenbits.com> - 2016-01-01 00:40 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Patrick Bartek <nemommxiv@gmail.com> - 2015-12-25 19:40 +0100
Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) Charlie Kravetz <cjk@teamcharliesangels.com> - 2015-12-24 15:50 +0100
| From | Staszek <stf.list.other@eisenbits.com> |
|---|---|
| Date | 2015-12-22 21:40 +0100 |
| Subject | random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qIBSV-e4-3@gated-at.bofh.it> |
Hi! My old Lenovo ThinkPad T61 laptop reboots by itself from time to time. Usually without a clue, but this time I was able to capture the stack trace: http://people.eisenbits.com/~stf/load/20151222-kernel-stack-trace.png . How to debug it? I've installed linux-image-3.16.0-4-amd64-dbg package: https://packages.debian.org/jessie/linux-image-3.16.0-4-amd64 , now is /usr/lib/debug/vmlinux-3.16.0-4-amd64 the vmlinux file matching my kernel version? What does "ckt20" stand for? For now I just wanted to follow the stack trace, eg. with addr2line. Sometimes it prints out some source code address but usually just "??:0". Why? Perhaps this is a hardware error, but where? Is this the graphic card? Or the south bridge maybe? Is this patchable? Thanks! This is the latest Debian Jessie. -- http://people.eisenbits.com/~stf/ http://www.eisenbits.com/ OpenPGP: 9EC2 5620 2355 B1DC 4A8F 8C79 0EC7 C214 E5AE 3B4E
[toc] | [next] | [standalone]
| From | Anders Andersson <pipatron@gmail.com> |
|---|---|
| Date | 2015-12-22 22:20 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qICvD-GS-7@gated-at.bofh.it> |
| In reply to | #162000 |
On Tue, Dec 22, 2015 at 9:27 PM, Staszek <stf.list.other@eisenbits.com> wrote: > Hi! > > My old Lenovo ThinkPad T61 laptop reboots by itself from time to time. > Usually without a clue, but this time I was able to capture the stack > trace: > http://people.eisenbits.com/~stf/load/20151222-kernel-stack-trace.png . > > How to debug it? I've installed linux-image-3.16.0-4-amd64-dbg package: > https://packages.debian.org/jessie/linux-image-3.16.0-4-amd64 , now is > /usr/lib/debug/vmlinux-3.16.0-4-amd64 the vmlinux file matching my > kernel version? What does "ckt20" stand for? > For now I just wanted to follow the stack trace, eg. with addr2line. > Sometimes it prints out some source code address but usually just > "??:0". Why? > > Perhaps this is a hardware error, but where? Is this the graphic card? > Or the south bridge maybe? > Is this patchable? First thing I do in a case like this is to run memtest86 in some form on the hardware.
[toc] | [prev] | [next] | [standalone]
| From | Staszek <stf.list.other@eisenbits.com> |
|---|---|
| Date | 2015-12-24 14:10 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJdOx-76Q-11@gated-at.bofh.it> |
| In reply to | #162002 |
On 2015-12-22 22:18, Anders Andersson wrote: > First thing I do in a case like this is to run memtest86 in some form > on the hardware. Good point, but: 1. those stack traces are always nouveau related 2. memtest86+ yields nothing 3. often upon logging into X, before the desktop appears, I am getting unexpected splash screens; they look like: http://people.eisenbits.com/~stf/load/20151224-bw-tiling.png , or sometimes that is a mangled view of what was being displayed before the crash+reboot. Perhaps that is a graphics card... -- http://people.eisenbits.com/~stf/ http://www.eisenbits.com/ OpenPGP: 9EC2 5620 2355 B1DC 4A8F 8C79 0EC7 C214 E5AE 3B4E
[toc] | [prev] | [next] | [standalone]
| From | Neil Roberts <neilr@matrixscience.com> |
|---|---|
| Date | 2015-12-24 15:00 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJeAW-7mT-19@gated-at.bofh.it> |
| In reply to | #162090 |
> On 2015-12-22 22:18, Anders Andersson wrote: >> First thing I do in a case like this is to run memtest86 in some form >> on the hardware. > Good point, but: > > 1. those stack traces are always nouveau related > 2. memtest86+ yields nothing > 3. often upon logging into X, before the desktop appears, I am getting > unexpected splash screens; they look like: > http://people.eisenbits.com/~stf/load/20151224-bw-tiling.png , or > sometimes that is a mangled view of what was being displayed before the > crash+reboot. > > Perhaps that is a graphics card... > I had a similar problem on a T520. If you have two graphics cards (ie, Intel Optimus) It will cause crashes when the graphics swaps between the devices. I resolved it by disabling one of the graphics cards in the bios.
[toc] | [prev] | [next] | [standalone]
| From | Sven Arvidsson <sa@whiz.se> |
|---|---|
| Date | 2015-12-24 15:10 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJeKB-7HG-7@gated-at.bofh.it> |
| In reply to | #162090 |
[Multipart message — attachments visible in raw view] — view raw
On Thu, 2015-12-24 at 14:00 +0100, Staszek wrote: > Perhaps that is a graphics card... Try disabling nouveau, both in the kernel and the xorg driver, and see if the crashes stop. You might also want to try a later kernel/xorg driver/mesa etc. But that might open up another can of worms. -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5
[toc] | [prev] | [next] | [standalone]
| From | Anders Andersson <pipatron@gmail.com> |
|---|---|
| Date | 2015-12-24 20:30 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJjKh-2gc-5@gated-at.bofh.it> |
| In reply to | #162092 |
On Thu, Dec 24, 2015 at 3:07 PM, Sven Arvidsson <sa@whiz.se> wrote: > On Thu, 2015-12-24 at 14:00 +0100, Staszek wrote: >> Perhaps that is a graphics card... > > Try disabling nouveau, both in the kernel and the xorg driver, and see > if the crashes stop. > > You might also want to try a later kernel/xorg driver/mesa etc. But > that might open up another can of worms. I'm using "the latest" nouveau on Debian Testing. It's horribly unstable, and been so for the last year. YMMV. :)
[toc] | [prev] | [next] | [standalone]
| From | Staszek <stf.list.other@eisenbits.com> |
|---|---|
| Date | 2015-12-25 03:30 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJqiJ-682-5@gated-at.bofh.it> |
| In reply to | #162092 |
On 2015-12-24 15:07, Sven Arvidsson wrote: > Try disabling nouveau, both in the kernel and the xorg driver, and see > if the crashes stop. Ok, but what other driver shall I use instead? According to ThinkPad Wiki nv driver works: http://www.thinkwiki.org/wiki/NVIDIA_Quadro_NVS_140M . Unfortunately it is not present in Jessie: https://packages.debian.org/search?keywords=xserver-xorg-video-nv ??... My graphics card: # lcpci -vv [...] 01:00.0 VGA compatible controller: NVIDIA Corporation G86M [Quadro NVS 140M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad T61 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d4000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4192 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Shall I compile nv driver from source and install it manually? -- http://people.eisenbits.com/~stf/ http://www.eisenbits.com/ OpenPGP: 9EC2 5620 2355 B1DC 4A8F 8C79 0EC7 C214 E5AE 3B4E
[toc] | [prev] | [next] | [standalone]
| From | Charlie Kravetz <cjk@teamcharliesangels.com> |
|---|---|
| Date | 2015-12-25 04:10 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJqVr-6zZ-3@gated-at.bofh.it> |
| In reply to | #162098 |
On Fri, 25 Dec 2015 03:16:21 +0100 Staszek <stf.list.other@eisenbits.com> wrote: >On 2015-12-24 15:07, Sven Arvidsson wrote: >> Try disabling nouveau, both in the kernel and the xorg driver, and see >> if the crashes stop. > >Ok, but what other driver shall I use instead? > >According to ThinkPad Wiki nv driver works: >http://www.thinkwiki.org/wiki/NVIDIA_Quadro_NVS_140M . Unfortunately it >is not present in Jessie: >https://packages.debian.org/search?keywords=xserver-xorg-video-nv ??... > >My graphics card: > ># lcpci -vv >[...] >01:00.0 VGA compatible controller: NVIDIA Corporation G86M [Quadro NVS >140M] (rev a1) (prog-if 00 [VGA controller]) > Subsystem: Lenovo ThinkPad T61 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- ><MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 49 > Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at d4000000 (64-bit, non-prefetchable) [size=32M] > Region 5: I/O ports at 2000 [size=128] > Expansion ROM at <unassigned> [disabled] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 4192 > Capabilities: [78] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency >L0s <512ns, L1 <4us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- >BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Capabilities: [128 v1] Power Budgeting <?> > Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 >Len=024 <?> > Kernel driver in use: nouveau > >Shall I compile nv driver from source and install it manually? > I have a Lenovo T520 here, with dual graphics. I found Nouveau did not work very good for me. I run dual monitors, so I had to make Optimus work. The best guide I found is http://www.unixmen.com/how-to-make-nvidia-optimus-technology-work-properly-on-debian/ It makes the setup easy. -- Charlie Kravetz Linux Registered User Number 425914 [http://linuxcounter.net/user/425914.html] Never let anyone steal your DREAM. [http://keepingdreams.com]
[toc] | [prev] | [next] | [standalone]
| From | Sven Arvidsson <sa@whiz.se> |
|---|---|
| Date | 2015-12-25 15:50 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJBQS-4Ks-1@gated-at.bofh.it> |
| In reply to | #162098 |
[Multipart message — attachments visible in raw view] — view raw
On Fri, 2015-12-25 at 03:16 +0100, Staszek wrote: > On 2015-12-24 15:07, Sven Arvidsson wrote: > > Try disabling nouveau, both in the kernel and the xorg driver, and > > see > > if the crashes stop. > > Ok, but what other driver shall I use instead? The vesa driver would probably be easiest to get up and running. -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5
[toc] | [prev] | [next] | [standalone]
| From | Staszek <stf.list.other@eisenbits.com> |
|---|---|
| Date | 2016-01-01 00:40 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qLUZ4-2rH-7@gated-at.bofh.it> |
| In reply to | #162105 |
On 2015-12-25 15:42, Sven Arvidsson wrote: > On Fri, 2015-12-25 at 03:16 +0100, Staszek wrote: >> On 2015-12-24 15:07, Sven Arvidsson wrote: >>> Try disabling nouveau, both in the kernel and the xorg driver, and >>> see >>> if the crashes stop. >> >> Ok, but what other driver shall I use instead? > > The vesa driver would probably be easiest to get up and running. I blacklisted nouveau kernel driver (using /etc/modprobe.d/nouveau.conf and then update-initramfs -u) and removed /usr/lib/xorg/modules/drivers/nouveau_drv.so , so nouveau is no longer used: # lsmod | grep -i -E '(video|nouveau|nv)' nvram 13034 1 thinkpad_acpi video 18096 0 thermal_sys 27642 3 video,thermal,processor # lspci -v [...] 01:00.0 VGA compatible controller: NVIDIA Corporation G86M [Quadro NVS 140M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad T61 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at d6000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at d4000000 (64-bit, non-prefetchable) [size=32M] I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [60] Power Management version 2 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> ^^^^ No nouveau here. But why is the kernel driver in use not listed here anymore?... X11 now seems to be using vesa driver, no crashes so far, but I am only having 1024x768 screen resolution (instead of 1680x1050, AFAIR). $ cat /var/log/Xorg.0.log | grep -i -E '(video|nouveau|nv|vesa)' [ 114.300] X.Org Video Driver: 18.0 [ 114.636] (==) Matched nouveau as autoconfigured driver 0 [ 114.636] (==) Matched nv as autoconfigured driver 1 [ 114.636] (==) Matched vesa as autoconfigured driver 4 [ 114.636] (II) LoadModule: "nouveau" [ 114.653] (WW) Warning, couldn't open module nouveau [ 114.653] (II) UnloadModule: "nouveau" [ 114.653] (II) Unloading nouveau [ 114.653] (EE) Failed to load module "nouveau" (module does not exist, 0) [ 114.653] (II) LoadModule: "nv" [ 114.654] (WW) Warning, couldn't open module nv [ 114.654] (II) UnloadModule: "nv" [ 114.654] (II) Unloading nv [ 114.654] (EE) Failed to load module "nv" (module does not exist, 0) [ 114.665] Module class: X.Org Video Driver [ 114.665] ABI class: X.Org Video Driver, version 18.0 [ 114.666] Module class: X.Org Video Driver [ 114.666] ABI class: X.Org Video Driver, version 18.0 [ 114.666] (II) LoadModule: "vesa" [ 114.666] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 114.680] (II) Module vesa: vendor="X.Org Foundation" [ 114.680] Module class: X.Org Video Driver [ 114.680] ABI class: X.Org Video Driver, version 18.0 [ 114.680] (II) VESA: driver for VESA chipsets: vesa [ 114.692] ABI class: X.Org Video Driver, version 18.0 [ 114.692] ABI class: X.Org Video Driver, version 18.0 [ 114.699] ABI class: X.Org Video Driver, version 18.0 [ 114.734] ABI class: X.Org Video Driver, version 18.0 [ 114.734] (II) VESA(0): initializing int10 [ 114.736] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 114.788] (II) VESA(0): VESA BIOS detected [ 114.788] (II) VESA(0): VESA VBE Version 3.0 [ 114.788] (II) VESA(0): VESA VBE Total Mem: 14336 kB [ 114.788] (II) VESA(0): VESA VBE OEM: NVIDIA [ 114.788] (II) VESA(0): VESA VBE OEM Software Rev: 96.134 [ 114.788] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation [ 114.788] (II) VESA(0): VESA VBE OEM Product: G86 Board - NV_NB8M [ 114.788] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev [ 114.882] (II) VESA(0): Creating default Display subsection in Screen section [ 114.882] (==) VESA(0): Depth 24, (--) framebuffer bpp 32 [ 114.882] (==) VESA(0): RGB weight 888 [ 114.882] (==) VESA(0): Default visual is TrueColor [ 114.882] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) [ 114.956] (II) VESA(0): VESA VBE DDC supported [ 114.956] (II) VESA(0): VESA VBE DDC Level none [ 114.956] (II) VESA(0): VESA VBE DDC transfer in appr. 0 sec. [ 115.219] (II) VESA(0): VESA VBE DDC read failed [ 115.219] (II) VESA(0): Searching for matching VESA mode(s): [ 115.273] (II) VESA(0): Total Memory: 224 64KB banks (14336kB) [ 115.273] (II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz [ 115.273] (II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz [ 115.273] (II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz [ 115.273] (WW) VESA(0): Unable to estimate virtual size [ 115.273] (II) VESA(0): Not using built-in mode "1680x1050" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "1280x800" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "320x400" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) [ 115.273] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) [ 115.274] (WW) VESA(0): No valid modes left. Trying less strict filter... [ 115.274] (II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz [ 115.274] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz [ 115.274] (II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz [ 115.274] (WW) VESA(0): Unable to estimate virtual size [ 115.324] (II) VESA(0): Not using built-in mode "1680x1050" (hsync out of range) [ 115.324] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range) [ 115.324] (II) VESA(0): Not using built-in mode "1280x800" (hsync out of range) [ 115.324] (II) VESA(0): Not using built-in mode "640x400" (hsync out of range) [ 115.324] (II) VESA(0): Not using built-in mode "320x400" (hsync out of range) [ 115.324] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings) [ 115.324] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings) [ 115.324] (--) VESA(0): Virtual size is 1024x768 (pitch 1024) [ 115.324] (**) VESA(0): *Built-in mode "1024x768" [ 115.324] (**) VESA(0): *Built-in mode "800x600" [ 115.324] (**) VESA(0): *Built-in mode "640x480" [ 115.324] (==) VESA(0): DPI set to (96, 96) [ 115.324] (II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118) [ 115.325] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115) [ 115.326] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112) [ 115.326] (**) VESA(0): Using "Shadow Framebuffer" [ 115.358] ABI class: X.Org Video Driver, version 18.0 [ 115.358] (II) VESA(0): initializing int10 [ 115.358] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 115.409] (II) VESA(0): VESA BIOS detected [ 115.409] (II) VESA(0): VESA VBE Version 3.0 [ 115.409] (II) VESA(0): VESA VBE Total Mem: 14336 kB [ 115.409] (II) VESA(0): VESA VBE OEM: NVIDIA [ 115.409] (II) VESA(0): VESA VBE OEM Software Rev: 96.134 [ 115.409] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation [ 115.409] (II) VESA(0): VESA VBE OEM Product: G86 Board - NV_NB8M [ 115.409] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev [ 115.409] (II) VESA(0): virtual address = 0x7fb7b4ccc000, [ 115.432] (II) VESA(0): Setting up VESA Mode 0x118 (1024x768) [ 115.773] (==) VESA(0): Default visual is TrueColor [ 115.808] (==) VESA(0): Backing store enabled [ 115.812] (==) VESA(0): DPMS enabled [ 117.700] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 117.700] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 117.700] (II) Using input driver 'evdev' for 'Video Bus' [ 117.700] (**) Video Bus: always reports core events [ 117.700] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 117.700] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 117.700] (--) evdev: Video Bus: Found keys [ 117.700] (II) evdev: Video Bus: Configuring as keyboard [ 117.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5/event4" [ 117.700] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) "Unable to estimate virtual size" seems to be the problem. Is this a VESA driver limitation (it will not support my 1680x1050 native resolution) or how do I configure this? Some 1680x1050 modes seem to be loaded but then skipped. :/ I would install proprietary nvidia drivers only as the last resort. -- http://people.eisenbits.com/~stf/ http://www.eisenbits.com/ OpenPGP: 9EC2 5620 2355 B1DC 4A8F 8C79 0EC7 C214 E5AE 3B4E
[toc] | [prev] | [next] | [standalone]
| From | Patrick Bartek <nemommxiv@gmail.com> |
|---|---|
| Date | 2015-12-25 19:40 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJFrr-72Q-3@gated-at.bofh.it> |
| In reply to | #162098 |
On Fri, 25 Dec 2015, Staszek wrote: > On 2015-12-24 15:07, Sven Arvidsson wrote: > > Try disabling nouveau, both in the kernel and the xorg driver, and > > see if the crashes stop. > > Ok, but what other driver shall I use instead? > > According to ThinkPad Wiki nv driver works: > http://www.thinkwiki.org/wiki/NVIDIA_Quadro_NVS_140M . Unfortunately > it is not present in Jessie: > https://packages.debian.org/search?keywords=xserver-xorg-video-nv ??.. Have you tried the proprietary nVidia drivers? I was having intermittent problems with noveau on my Wheezy system, and installed nVidia's. Been working great since. Simple install. Just followed the instructions. B
[toc] | [prev] | [next] | [standalone]
| From | Charlie Kravetz <cjk@teamcharliesangels.com> |
|---|---|
| Date | 2015-12-24 15:50 +0100 |
| Subject | Re: random reboots of my Lenovo ThinkPad (3.16.7-ckt20-1+deb8u1) (kernel stack trace) |
| Message-ID | <qJfnk-7Z0-7@gated-at.bofh.it> |
| In reply to | #162090 |
On Thu, 24 Dec 2015 14:00:15 +0100 Staszek <stf.list.other@eisenbits.com> wrote: >On 2015-12-22 22:18, Anders Andersson wrote: >> First thing I do in a case like this is to run memtest86 in some form >> on the hardware. > >Good point, but: > >1. those stack traces are always nouveau related >2. memtest86+ yields nothing >3. often upon logging into X, before the desktop appears, I am getting >unexpected splash screens; they look like: >http://people.eisenbits.com/~stf/load/20151224-bw-tiling.png , or >sometimes that is a mangled view of what was being displayed before the >crash+reboot. > >Perhaps that is a graphics card... > I have a Lenovo T520 here, with dual graphics. I found Nouveau did not work very good for me. I run dual monitors, so I had to make Optimus work. The best guide I found is http://www.unixmen.com/how-to-make-nvidia-optimus-technology-work-properly-on-debian/ It makes the setup easy. -- Charlie Kravetz Linux Registered User Number 425914 [http://linuxcounter.net/user/425914.html] Never let anyone steal your DREAM. [http://keepingdreams.com]
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.user
csiph-web