Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #257023 > unrolled thread
| Started by | Marc Auslander <marcslists@gmail.com> |
|---|---|
| First post | 2023-04-11 02:30 +0200 |
| Last post | 2023-04-11 18:10 +0200 |
| Articles | 20 on this page of 62 — 24 participants |
Back to article view | Back to linux.debian.user
update-initramfs Marc Auslander <marcslists@gmail.com> - 2023-04-11 02:30 +0200
Re: update-initramfs David Wright <deblis@lionunicorn.co.uk> - 2023-04-11 05:00 +0200
Re: update-initramfs Marc Auslander <marcslists@gmail.com> - 2023-04-11 17:10 +0200
Re: update-initramfs davidson <davidson@freevolt.org> - 2023-04-11 19:40 +0200
Re: update-initramfs Michel Verdier <mv524@free.fr> - 2023-04-11 21:00 +0200
Re: update-initramfs davidson <davidson@freevolt.org> - 2023-04-11 21:50 +0200
Re: update-initramfs davidson@freevolt.org - 2023-04-11 22:00 +0200
Re: update-initramfs zithro <slack@rabbit.lu> - 2023-04-11 22:20 +0200
Re: update-initramfs David Wright <deblis@lionunicorn.co.uk> - 2023-04-12 04:10 +0200
Re: update-initramfs Michel Verdier <mv524@free.fr> - 2023-04-12 04:40 +0200
Re: update-initramfs The Wanderer <wanderer@fastmail.fm> - 2023-04-12 13:40 +0200
Re: update-initramfs Michel Verdier <mv524@free.fr> - 2023-04-12 13:50 +0200
Re: update-initramfs The Wanderer <wanderer@fastmail.fm> - 2023-04-12 14:00 +0200
Re: update-initramfs David Wright <deblis@lionunicorn.co.uk> - 2023-04-12 22:50 +0200
Re: update-initramfs Michel Verdier <mv524@free.fr> - 2023-04-13 04:20 +0200
Re: update-initramfs David Wright <deblis@lionunicorn.co.uk> - 2023-04-13 21:00 +0200
Re: update-initramfs Charles Curley <charlescurley@charlescurley.com> - 2023-04-13 22:40 +0200
Re: update-initramfs David Wright <david@lionunicorn.co.uk> - 2023-04-15 00:50 +0200
Re: update-initramfs Michael Stone <mstone@debian.org> - 2023-04-13 22:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver David <curmudgeon@telaman.net.au> - 2023-04-14 23:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 00:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver The Wanderer <wanderer@fastmail.fm> - 2023-04-15 00:30 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Jeremy Ardley <jeremy@ardley.org> - 2023-04-15 00:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Charles Curley <charlescurley@charlescurley.com> - 2023-04-15 01:00 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 01:00 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver The Wanderer <wanderer@fastmail.fm> - 2023-04-15 01:10 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 01:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver The Wanderer <wanderer@fastmail.fm> - 2023-04-15 01:30 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 13:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Jeremy Ardley <jeremy@ardley.org> - 2023-04-15 01:10 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 01:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Bret Busby <bret@busby.net> - 2023-04-15 01:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver David <curmudgeon@telaman.net.au> - 2023-04-15 01:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver "Andrew M.A. Cater" <amacater@einval.com> - 2023-04-15 12:10 +0200
Pillow fight [was: EPSON ET M 1120 ...] <tomas@tuxteam.de> - 2023-04-15 12:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver "Thomas Schmitt" <scdbackup@gmx.net> - 2023-04-15 13:00 +0200
On strange threads [was: EPSON ET M 1120 new printer...] <tomas@tuxteam.de> - 2023-04-15 15:40 +0200
Re: On strange threads [was: EPSON ET M 1120 new printer...] Brian <ad44@cityscape.co.uk> - 2023-04-15 21:50 +0200
Re: On strange threads [was: EPSON ET M 1120 new printer...] <tomas@tuxteam.de> - 2023-04-16 07:40 +0200
Re: On strange threads [was: EPSON ET M 1120 new printer...] davidson <davidson@freevolt.org> - 2023-04-16 09:10 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 13:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Bret Busby <bret@busby.net> - 2023-04-15 22:00 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Bret Busby <bret@busby.net> - 2023-04-15 22:30 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Jeffrey Walton <noloader@gmail.com> - 2023-04-16 00:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Bret Busby <bret@busby.net> - 2023-04-16 01:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Curt <curty@free.fr> - 2023-04-22 16:30 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver chris <tknchris@gmail.com> - 2023-04-22 16:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver David <curmudgeon@telaman.net.au> - 2023-04-15 01:30 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver <tomas@tuxteam.de> - 2023-04-23 11:20 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver <tomas@tuxteam.de> - 2023-04-23 11:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Stefan Monnier <monnier@iro.umontreal.ca> - 2023-04-15 00:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Brian <ad44@cityscape.co.uk> - 2023-04-15 14:00 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Jeffrey Walton <noloader@gmail.com> - 2023-04-29 13:50 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Greg Wooledge <greg@wooledge.org> - 2023-05-01 13:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver Thomas Hochstein <thh@thh.name> - 2023-05-01 14:40 +0200
Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver gene heskett <gheskett@shentel.net> - 2023-05-01 15:30 +0200
Re: update-initramfs davidson <davidson@freevolt.org> - 2023-04-12 13:00 +0200
Re: update-initramfs davidson@freevolt.org - 2023-04-12 13:00 +0200
Re: update-initramfs David Wright <deblis@lionunicorn.co.uk> - 2023-04-11 22:10 +0200
Re: update-initramfs zithro <slack@rabbit.lu> - 2023-04-11 15:30 +0200
Re: update-initramfs Marc Auslander <marcslists@gmail.com> - 2023-04-11 17:00 +0200
Re: update-initramfs zithro <slack@rabbit.lu> - 2023-04-11 18:10 +0200
Page 2 of 4 — ← Prev page 1 [2] 3 4 Next page →
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 00:20 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkzVT-23Qc-1@gated-at.bofh.it> |
| In reply to | #257152 |
On Fri 14 Apr 2023 at 14:40:33 +0000, Schwibinger Michael wrote: > Good afternoon. > The new printer is not working. > EPSON is saying > You cant use EPSON with Linux. > > Is this true? You could consider: * Stating the Debain OS being used. * Giving the printer make and model. * Specifying the connection method. USB. Network. * Giving the exact error message and where it came from. -- Brian.
[toc] | [prev] | [next] | [standalone]
| From | The Wanderer <wanderer@fastmail.fm> |
|---|---|
| Date | 2023-04-15 00:30 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkA5z-23T9-3@gated-at.bofh.it> |
| In reply to | #257179 |
[Multipart message — attachments visible in raw view] — view raw
On 2023-04-14 at 18:10, Brian wrote: > On Fri 14 Apr 2023 at 14:40:33 +0000, Schwibinger Michael wrote: > >> Good afternoon. >> The new printer is not working. >> EPSON is saying >> You cant use EPSON with Linux. >> >> Is this true? > > You could consider: > > * Stating the Debain OS being used. > * Giving the printer make and model. The make *was* stated: Epson. The model may also have been stated, albeig only in the Subject line: ET M1120. From a bit of Googling, the "ET" appears to stand for "EcoTank". > * Specifying the connection method. USB. Network. > * Giving the exact error message and where it came from. Also: * Starting a new thread to discuss the matter, rather than replying to an existing message deep in an existing thread, deleting the body, and changing the Subject line before sending. (This question, and its replies, are appearing as responses to a mail from Michael Stone in the 'update-initramfs' thread.) -- The Wanderer The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man. -- George Bernard Shaw
[toc] | [prev] | [next] | [standalone]
| From | Jeremy Ardley <jeremy@ardley.org> |
|---|---|
| Date | 2023-04-15 00:40 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkAff-23W2-9@gated-at.bofh.it> |
| In reply to | #257181 |
[Multipart message — attachments visible in raw view] — view raw
On 15/4/23 06:22, The Wanderer wrote: > > The make *was* stated: Epson. > > The model may also have been stated, albeig only in the Subject line: ET > M1120. From a bit of Googling, the "ET" appears to stand for "EcoTank". > If you look hard enough you find epson does support it. https://download.ebz.epson.net/dsc/search/01/search/searchModule and search for M1120 you find ET-M1120 Series M1120 Series Printer Driver Linux 1.7.26 ESC/P-R Driver (generic driver) All language 04-10-2023 and that links to the standard esc/p-r driver -- Jeremy (Lists)
[toc] | [prev] | [next] | [standalone]
| From | Charles Curley <charlescurley@charlescurley.com> |
|---|---|
| Date | 2023-04-15 01:00 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkAyB-242r-1@gated-at.bofh.it> |
| In reply to | #257183 |
On Sat, 15 Apr 2023 06:36:53 +0800 Jeremy Ardley <jeremy@ardley.org> wrote: > On 15/4/23 06:22, The Wanderer wrote: > [...] > If you look hard enough you find epson does support it. > > https://download.ebz.epson.net/dsc/search/01/search/searchModule > > and search for M1120 > > you find > > ET-M1120 Series > M1120 Series > Printer Driver Linux > 1.7.26 ESC/P-R Driver (generic driver) All > language 04-10-2023 > > > and that links to the standard esc/p-r driver > And that driver is even available in Debian. apt show printer-driver-escpr -- Does anybody read signatures any more? https://charlescurley.com https://charlescurley.com/blog/
[toc] | [prev] | [next] | [standalone]
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 01:00 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkAyB-242r-3@gated-at.bofh.it> |
| In reply to | #257181 |
On Fri 14 Apr 2023 at 18:22:09 -0400, The Wanderer wrote: > On 2023-04-14 at 18:10, Brian wrote: > > > On Fri 14 Apr 2023 at 14:40:33 +0000, Schwibinger Michael wrote: > > > >> Good afternoon. > >> The new printer is not working. > >> EPSON is saying > >> You cant use EPSON with Linux. > >> > >> Is this true? > > > > You could consider: > > > > * Stating the Debain OS being used. > > * Giving the printer make and model. > > The make *was* stated: Epson. > > The model may also have been stated, albeig only in the Subject line: ET > M1120. From a bit of Googling, the "ET" appears to stand for "EcoTank". The EPSON ET M 1120 doesn't exist. Do we have to guess its correct name as well as any other relevant information? > > * Specifying the connection method. USB. Network. > > * Giving the exact error message and where it came from. > > Also: > > * Starting a new thread to discuss the matter, rather than replying to > an existing message deep in an existing thread, deleting the body, and > changing the Subject line before sending. > > (This question, and its replies, are appearing as responses to a mail > from Michael Stone in the 'update-initramfs' thread.) I haven't a clue what you are going on about here. Shift-L in mutt was used at this end. -- Brian.
[toc] | [prev] | [next] | [standalone]
| From | The Wanderer <wanderer@fastmail.fm> |
|---|---|
| Date | 2023-04-15 01:10 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkAIh-24kQ-1@gated-at.bofh.it> |
| In reply to | #257185 |
[Multipart message — attachments visible in raw view] — view raw
On 2023-04-14 at 18:52, Brian wrote: > On Fri 14 Apr 2023 at 18:22:09 -0400, The Wanderer wrote: > >> On 2023-04-14 at 18:10, Brian wrote: >> > You could consider: >> > >> > * Stating the Debain OS being used. >> > * Giving the printer make and model. >> >> The make *was* stated: Epson. >> >> The model may also have been stated, albeig only in the Subject line: ET >> M1120. From a bit of Googling, the "ET" appears to stand for "EcoTank". > > The EPSON ET M 1120 doesn't exist. Do we have to guess its correct name as well > as any other relevant information? When I searched for Epson ET M 1120 I got a suggestion that I may have meant "M1120" instead of the last two search terms, and hits for the "Epson EcoTank ET M1120" and/or "Epson EcoTank M1120", which look to be different names for the same model and to be a fairly clear match. While, yes, specifying the exact name clearly would be preferable, this is far from unreasonably difficult to figure out. >> > * Specifying the connection method. USB. Network. >> > * Giving the exact error message and where it came from. >> >> Also: >> >> * Starting a new thread to discuss the matter, rather than replying >> to an existing message deep in an existing thread, deleting the >> body, and changing the Subject line before sending. >> >> (This question, and its replies, are appearing as responses to a >> mail from Michael Stone in the 'update-initramfs' thread.) > > I haven't a clue what you are going on about here. Shift-L in mutt > was used at this end. Your replies to the OP have been fine, AFAIK. The OP's message was itself a reply, as can be seen by looking at its headers (In-Reply-To: and References:), but was otherwise presented as if it had been the start of a new thread; that is not fine, because it hides the "new thread" inside of the existing one, at least for anyone using a threaded view of the list of messages. -- The Wanderer The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man. -- George Bernard Shaw
[toc] | [prev] | [next] | [standalone]
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 01:20 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkARX-24nT-3@gated-at.bofh.it> |
| In reply to | #257187 |
On Fri 14 Apr 2023 at 19:06:08 -0400, The Wanderer wrote: > On 2023-04-14 at 18:52, Brian wrote: > > > On Fri 14 Apr 2023 at 18:22:09 -0400, The Wanderer wrote: > > > >> On 2023-04-14 at 18:10, Brian wrote: > > >> > You could consider: > >> > > >> > * Stating the Debain OS being used. > >> > * Giving the printer make and model. > >> > >> The make *was* stated: Epson. > >> > >> The model may also have been stated, albeig only in the Subject line: ET > >> M1120. From a bit of Googling, the "ET" appears to stand for "EcoTank". > > > > The EPSON ET M 1120 doesn't exist. Do we have to guess its correct name as well > > as any other relevant information? > > When I searched for > > Epson ET M 1120 > > I got a suggestion that I may have meant "M1120" instead of the last two > search terms, and hits for the "Epson EcoTank ET M1120" and/or "Epson > EcoTank M1120", which look to be different names for the same model and > to be a fairly clear match. > > While, yes, specifying the exact name clearly would be preferable, this > is far from unreasonably difficult to figure out. I decided to take your signature as a template for my original response :). > >> > * Specifying the connection method. USB. Network. > >> > * Giving the exact error message and where it came from. > >> > >> Also: > >> > >> * Starting a new thread to discuss the matter, rather than replying > >> to an existing message deep in an existing thread, deleting the > >> body, and changing the Subject line before sending. > >> > >> (This question, and its replies, are appearing as responses to a > >> mail from Michael Stone in the 'update-initramfs' thread.) > > > > I haven't a clue what you are going on about here. Shift-L in mutt > > was used at this end. > > Your replies to the OP have been fine, AFAIK. The OP's message was > itself a reply, as can be seen by looking at its headers (In-Reply-To: > and References:), but was otherwise presented as if it had been the > start of a new thread; that is not fine, because it hides the "new > thread" inside of the existing one, at least for anyone using a threaded > view of the list of messages. That's an issue for the OP, not me. -- Brian.
[toc] | [prev] | [next] | [standalone]
| From | The Wanderer <wanderer@fastmail.fm> |
|---|---|
| Date | 2023-04-15 01:30 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkB1D-24qV-1@gated-at.bofh.it> |
| In reply to | #257190 |
[Multipart message — attachments visible in raw view] — view raw
On 2023-04-14 at 19:17, Brian wrote: > On Fri 14 Apr 2023 at 19:06:08 -0400, The Wanderer wrote: > >> On 2023-04-14 at 18:52, Brian wrote: >>> The EPSON ET M 1120 doesn't exist. Do we have to guess its >>> correct name as well as any other relevant information? >> >> When I searched for >> >> Epson ET M 1120 >> >> I got a suggestion that I may have meant "M1120" instead of the >> last two search terms, and hits for the "Epson EcoTank ET M1120" >> and/or "Epson EcoTank M1120", which look to be different names for >> the same model and to be a fairly clear match. >> >> While, yes, specifying the exact name clearly would be preferable, >> this is far from unreasonably difficult to figure out. > > I decided to take your signature as a template for my original > response :). I can respect that! >>> I haven't a clue what you are going on about here. Shift-L in >>> mutt was used at this end. >> >> Your replies to the OP have been fine, AFAIK. The OP's message was >> itself a reply, as can be seen by looking at its headers >> (In-Reply-To: and References:), but was otherwise presented as if >> it had been the start of a new thread; that is not fine, because it >> hides the "new thread" inside of the existing one, at least for >> anyone using a threaded view of the list of messages. > > That's an issue for the OP, not me. Certainly. I was meaning that bullet-point item as an addendum to the list you provided (which I understand to have been aimed at the OP), not as something directed at you. -- The Wanderer The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man. -- George Bernard Shaw
[toc] | [prev] | [next] | [standalone]
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 13:40 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkMq5-2bud-5@gated-at.bofh.it> |
| In reply to | #257191 |
On Fri 14 Apr 2023 at 19:28:19 -0400, The Wanderer wrote: > On 2023-04-14 at 19:17, Brian wrote: [...] > > That's an issue for the OP, not me. > > Certainly. I was meaning that bullet-point item as an addendum to the > list you provided (which I understand to have been aimed at the OP), not > as something directed at you. Apologies. I should have taken more notice of the structure of your mail. -- Brian.
[toc] | [prev] | [next] | [standalone]
| From | Jeremy Ardley <jeremy@ardley.org> |
|---|---|
| Date | 2023-04-15 01:10 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkAIh-24kQ-3@gated-at.bofh.it> |
| In reply to | #257185 |
On 15/4/23 06:52, Brian wrote: > The EPSON ET M 1120 doesn't exist. Do we have to guess its correct > name as well I asked ChatGPT3.5 about that text string. At least ChatGPT could figure it out >>>>>>>>>> My Question Linux printer driver and printer command protocol for epson ET M 1120 ? >>>>>>>>>> ChatGPT response The Epson ET-M1120 printer supports the Epson ESC/P-R printer language, which is a command protocol used by Epson printers. To install the printer driver for Linux, you can follow these steps: Connect the printer to your computer and make sure it is turned on. Open your Linux terminal and run the following command to update your system package list: sudo apt-get update Install the printer driver by running the following command: sudo apt-get install printer-driver-escpr Follow the on-screen instructions to complete the installation. Once the driver is installed, you can use the printer with any application that supports printing. -- Jeremy (Lists)
[toc] | [prev] | [next] | [standalone]
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 01:20 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkARX-24nT-1@gated-at.bofh.it> |
| In reply to | #257188 |
On Sat 15 Apr 2023 at 07:00:18 +0800, Jeremy Ardley wrote: > > On 15/4/23 06:52, Brian wrote: > > The EPSON ET M 1120 doesn't exist. Do we have to guess its correct name > > as well > > > I asked ChatGPT3.5 about that text string. At least ChatGPT could figure it > out > > >>>>>>>>>> My Question > > Linux printer driver and printer command protocol for epson ET M 1120 ? > > >>>>>>>>>> ChatGPT response > > The Epson ET-M1120 printer supports the Epson ESC/P-R printer language, > which is a command protocol used by Epson printers. It is the OP who needs help, not me. She couls at least provide correct and full date. -- Brian.
[toc] | [prev] | [next] | [standalone]
| From | Bret Busby <bret@busby.net> |
|---|---|
| Date | 2023-04-15 01:50 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkBkZ-24wT-1@gated-at.bofh.it> |
| In reply to | #257189 |
On 15/4/23 07:11, Brian wrote: > On Sat 15 Apr 2023 at 07:00:18 +0800, Jeremy Ardley wrote: > >> >> On 15/4/23 06:52, Brian wrote: >>> The EPSON ET M 1120 doesn't exist. Do we have to guess its correct name >>> as well >> >> >> I asked ChatGPT3.5 about that text string. At least ChatGPT could figure it >> out >> >>>>>>>>>>>> My Question >> >> Linux printer driver and printer command protocol for epson ET M 1120 ? >> >>>>>>>>>>>> ChatGPT response >> >> The Epson ET-M1120 printer supports the Epson ESC/P-R printer language, >> which is a command protocol used by Epson printers. > > It is the OP who needs help, not me. She couls at least provide correct and full date. > Why not just everyone attack each other? This looks like an uncontrolled pillow fight. .. Bret Busby Armadale West Australia (UTC+0800) ..............
[toc] | [prev] | [next] | [standalone]
| From | David <curmudgeon@telaman.net.au> |
|---|---|
| Date | 2023-04-15 01:50 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkBkZ-24wT-5@gated-at.bofh.it> |
| In reply to | #257193 |
On Sat, 2023-04-15 at 07:17 +0800, Bret Busby wrote: > On 15/4/23 07:11, Brian wrote: > > On Sat 15 Apr 2023 at 07:00:18 +0800, Jeremy Ardley wrote: > > > > > > > > On 15/4/23 06:52, Brian wrote: > > > > The EPSON ET M 1120 doesn't exist. Do we have to guess its > > > > correct name > > > > as well > > > > > > > > > I asked ChatGPT3.5 about that text string. At least ChatGPT could > > > figure it > > > out > > > > > > > > > > > > > > > > My Question > > > > > > Linux printer driver and printer command protocol for epson ET M > > > 1120 ? > > > > > > > > > > > > > > > > ChatGPT response > > > > > > The Epson ET-M1120 printer supports the Epson ESC/P-R printer > > > language, > > > which is a command protocol used by Epson printers. > > > > It is the OP who needs help, not me. She couls at least provide > > correct and full date. > > > Why not just everyone attack each other? > > This looks like an uncontrolled pillow fight. Agreed! Specifically geared to somebody not coming back, or just going back to using Windows. Tone and manner are more than disorienting to a new user, and far from helpful. Cheers!
[toc] | [prev] | [next] | [standalone]
| From | "Andrew M.A. Cater" <amacater@einval.com> |
|---|---|
| Date | 2023-04-15 12:10 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkL0Z-2aKF-1@gated-at.bofh.it> |
| In reply to | #257193 |
On Sat, Apr 15, 2023 at 07:17:23AM +0800, Bret Busby wrote: > Why not just everyone attack each other? > > This looks like an uncontrolled pillow fight. > > .. > Bret Busby > Armadale > West Australia > (UTC+0800) > .............. > Agreed: in this instance, however, we've had a series of emails from this person in the past. Most of them don't reset a subject so go on a long time on various subjects in the same thread. That said: people - please remember that this list is subject to the Code of Conduct. Part of that involves being constructive and helpful: sniping doesn't really help at all. We are all human and can get annoyed when someone just doesn't *get it* but it's useful to remember that email is hard because you can't see the circumstances of the person on the other end. That's also one of the reasons why these threads keep asking for technical details / accuracy: whenever these sorts of questions get asked, we're using guesswork because we can't see over your shoulder. With every good wish, as ever, Andy Cater [amacater@debian.org]
[toc] | [prev] | [next] | [standalone]
| From | <tomas@tuxteam.de> |
|---|---|
| Date | 2023-04-15 12:20 +0200 |
| Subject | Pillow fight [was: EPSON ET M 1120 ...] |
| Message-ID | <GkLaF-2aNU-1@gated-at.bofh.it> |
| In reply to | #257205 |
[Multipart message — attachments visible in raw view] — view raw
On Sat, Apr 15, 2023 at 10:04:46AM +0000, Andrew M.A. Cater wrote: > On Sat, Apr 15, 2023 at 07:17:23AM +0800, Bret Busby wrote: > > Why not just everyone attack each other? > > > > This looks like an uncontrolled pillow fight. It does, indeed. [...] > Agreed: in this instance, however, we've had a series of emails from this > person in the past. Most of them don't reset a subject so go on a long time > on various subjects in the same thread. Seconded. For whatever reason, the OP can't do better. (S)he is known to eventually come back on help proposals. Communication is sometimes difficult. If that rubs you the wrong way, please just abstain. Pouring vitriol on people should be saved for very specific cases. This doesn't seem an appropriate one. > That said: people - please remember that this list is subject to the Code > of Conduct. Part of that involves being constructive and helpful: sniping > doesn't really help at all. Thanks. Fully agreed. Cheers -- t
[toc] | [prev] | [next] | [standalone]
| From | "Thomas Schmitt" <scdbackup@gmx.net> |
|---|---|
| Date | 2023-04-15 13:00 +0200 |
| Subject | Re: EPSON ET M 1120 new printer: If You can read this, you are using the wrong driver |
| Message-ID | <GkLNn-2b1o-1@gated-at.bofh.it> |
| In reply to | #257205 |
Hi, Bret Busby wrote: > > Why not just everyone attack each other? > > This looks like an uncontrolled pillow fight. We should rather invest our time in a discussion whether CP/M was better than DOS. Andrew M.A. Cater wrote: > in this instance, however, we've had a series of emails from this > person in the past. [...] > sniping doesn't really help at all. [...] > We are all human and can get annoyed when someone just doesn't *get it* But this particular poster is quite special. About a year ago i too tried to help Sophie / Michael Schwibinger with a question about "CD" https://lists.debian.org/debian-user/2022/04/msg00742.html but her/his replies in the thread caused me to ask for an explanation why "Sophie" uses the mail address of a german amateur clown and IT engineer, especially whether "Michael Schwibinger" is aware of this usage: https://lists.debian.org/debian-user/2022/04/msg00964.html No reply was received. Given the time pattern of posts and the lack of any learning progress in respect to proper asking Debian GNU/Linux questions i suspect that the mails from hbss@hotmail.com are not sent with sincere intentions. They rather look like somebody is bored from time to time and throws a pebble into the pond just to watch the ripples. Just look at the photo on https://hbss.tripod.com/ I may be wrong. But it would be easy for Sophie / Michael Schwibinger to explain the circumstances, which she/he did not do up to now. So i think it is currently not worth to quarrel over these mails. Have a nice day :) Thomas
[toc] | [prev] | [next] | [standalone]
| From | <tomas@tuxteam.de> |
|---|---|
| Date | 2023-04-15 15:40 +0200 |
| Subject | On strange threads [was: EPSON ET M 1120 new printer...] |
| Message-ID | <GkOid-2cEI-5@gated-at.bofh.it> |
| In reply to | #257208 |
[Multipart message — attachments visible in raw view] — view raw
On Sat, Apr 15, 2023 at 12:50:16PM +0200, Thomas Schmitt wrote: [...] > Given the time pattern of posts and the lack of any learning progress > in respect to proper asking Debian GNU/Linux questions i suspect that > the mails from hbss@hotmail.com are not sent with sincere intentions. This is a pretty strong assessment. Coming from you, I hesitate to dismiss it right away, but I'd still prefer to apply a healthy dose of Hanlon's razor. Cheers -- t
[toc] | [prev] | [next] | [standalone]
| From | Brian <ad44@cityscape.co.uk> |
|---|---|
| Date | 2023-04-15 21:50 +0200 |
| Subject | Re: On strange threads [was: EPSON ET M 1120 new printer...] |
| Message-ID | <GkU4h-2g4m-1@gated-at.bofh.it> |
| In reply to | #257220 |
On Sat 15 Apr 2023 at 15:32:30 +0200, tomas@tuxteam.de wrote:
> On Sat, Apr 15, 2023 at 12:50:16PM +0200, Thomas Schmitt wrote:
>
> [...]
>
> > Given the time pattern of posts and the lack of any learning progress
> > in respect to proper asking Debian GNU/Linux questions i suspect that
> > the mails from hbss@hotmail.com are not sent with sincere intentions.
>
> This is a pretty strong assessment. Coming from you, I hesitate to
> dismiss it right away,
Tongue. Boots. Lick.
> but I'd still prefer to apply a healthy dose
> of Hanlon's razor.
Designating a user as stupid is a no-no in my book.
--
Brian.
[toc] | [prev] | [next] | [standalone]
| From | <tomas@tuxteam.de> |
|---|---|
| Date | 2023-04-16 07:40 +0200 |
| Subject | Re: On strange threads [was: EPSON ET M 1120 new printer...] |
| Message-ID | <Gl3hf-2lJQ-1@gated-at.bofh.it> |
| In reply to | #257244 |
[Multipart message — attachments visible in raw view] — view raw
On Sat, Apr 15, 2023 at 08:44:20PM +0100, Brian wrote: [...] > Tongue. Boots. Lick. You must be a pretty unhappy person. Pity you. Cheers -- t
[toc] | [prev] | [next] | [standalone]
| From | davidson <davidson@freevolt.org> |
|---|---|
| Date | 2023-04-16 09:10 +0200 |
| Subject | Re: On strange threads [was: EPSON ET M 1120 new printer...] |
| Message-ID | <Gl4Gl-2mJA-1@gated-at.bofh.it> |
| In reply to | #257270 |
On Sun, 16 Apr 2023 tomas@tuxteam.de wrote: > On Sat, Apr 15, 2023 at 08:44:20PM +0100, Brian wrote: > > [...] > >> Tongue. Boots. Lick. This was banter. And you trimmed away the truly funny bit. > You must be a pretty unhappy person. Pity you. This was pain. Pity us all. Humor is the favorite child of pain and misery. None of us are as happy as we'd like, and even humor takes some practice. On both ends. -- Hackers are free people. They are like artists. If they are in a good mood, they get up in the morning and begin painting their pictures. -- Vladimir Putin
[toc] | [prev] | [next] | [standalone]
Page 2 of 4 — ← Prev page 1 [2] 3 4 Next page →
Back to top | Article view | linux.debian.user
csiph-web