Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #228817 > unrolled thread

fibre problem with Intel 82571EB

Back to article view | Back to linux.debian.user

Contents

  fibre problem with Intel 82571EB Frank Weißer <linux@weisser-ol.de> - 2020-11-20 19:40 +0100
    (solved) Re: fibre problem with Intel 82571EB Frank Weißer <linux@weisser-ol.de> - 2020-11-24 08:10 +0100

#228817 — fibre problem with Intel 82571EB

Hi folks!
Situation:
Debian-Edu 10 Server with

eth0 NC(=unused)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network 
Connection (rev 02)
         Subsystem: Fujitsu Technology Solutions 82566DM-2 Gigabit 
Network Connection
         Kernel driver in use: e1000e

eth1-4
eth1 NC
eth2 NC
eth3 flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
         inet 192.168.0.254  netmask 255.255.255.0
eth4 flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
         inet 10.0.2.2  netmask 255.0.0.0
04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet 
Controller (Fiber) (rev 06)
         Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
         Kernel driver in use: e1000e

I can reach tjener via fibre cable and switch and use it with scp, smb 
and so on.
But dhcp, bxe-boot and ltsp-clients don't work.

dhcp requests via
#dhclient eth4
need about 70 seconds to give me an ip. Network manager already gives up 
in that time. Even connecting direct (with a media converter, not using 
other fiber cables or switches) doesn't work.
So cable/switch don't seam to hurt.

How can I tell 82571EB to do its work?

If I switch eth4's address to eth0 (copper) everything works fine. So 
services seem to be running

appreciating any answer

readu
Frank

[toc] | [next] | [standalone]

#228989 — (solved) Re: fibre problem with Intel 82571EB

Thanks to Wolfgang from > debian-edu@lists.debian.org

the following did the trick:

> IMO this is not a network card issue.
> I guess renaming the interface names would help.
> 
> Only do the following if the system isn't used by anyone else...
> 
> (0) Put down the MAC addresses of eth3 and eth4 (eth4 should be eth0 and
>      eth3 should be eth1 later)
> (1) Remove 'net.ifnames=0' from the kernel command line in /etc/default/grub
> (2) Run 'update-grub'
> (3) Reboot. 'ip a' will show you the persistent network interface names
>     (probably something like enpXsY, where Y is the slot name) and MACs
> (4) Add MAC matching lines at the begin of /etc/network/interfaces, e.g.:
>     rename enp0s3=eth0
>     rename enp0s8=eth1
> (5) Reboot and check if everything works, otherwise fix the renaming lines

Frank Weißer:
> Hi folks!
> Situation:
> Debian-Edu 10 Server with
> 
> eth0 NC(=unused)
> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network 
> Connection (rev 02)
>          Subsystem: Fujitsu Technology Solutions 82566DM-2 Gigabit 
> Network Connection
>          Kernel driver in use: e1000e
> 
> eth1-4
> eth1 NC
> eth2 NC
> eth3 flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>          inet 192.168.0.254  netmask 255.255.255.0
> eth4 flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>          inet 10.0.2.2  netmask 255.0.0.0
> 04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet 
> Controller (Fiber) (rev 06)
>          Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
>          Kernel driver in use: e1000e
> 
> I can reach tjener via fibre cable and switch and use it with scp, smb 
> and so on.
> But dhcp, bxe-boot and ltsp-clients don't work.
> 
> dhcp requests via
> #dhclient eth4
> need about 70 seconds to give me an ip. Network manager already gives up 
> in that time. Even connecting direct (with a media converter, not using 
> other fiber cables or switches) doesn't work.
> So cable/switch don't seam to hurt.
> 
> How can I tell 82571EB to do its work?
> 
> If I switch eth4's address to eth0 (copper) everything works fine. So 
> services seem to be running
> 
> appreciating any answer
> 
> readu
> Frank
> 

[toc] | [prev] | [standalone]

Back to top | Article view | linux.debian.user

csiph-web