Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #207664

Re: Sudden “operation not permitted”

Show key headers only | View raw

On 4/17/19 1:19 PM, Marc Auslander wrote:
> David Christensen <dpchrist@holgerdanske.com> writes:
> 
>> On 4/16/19 11:25 PM, Mark Fletcher wrote:
>>> (Apologies if this mail comes through poorly formatted for the list; my
>>> main machine is unavailable due to this problem and I’m writing on an
>>> iPad...)
>>>
>>> Running Stretch on a circa-2009 self-built machine which has run happily
>>> without serious issues since it was built, apart from the odd annoyance
>>> with Bluetooth audio which the list has already had the pleasure of hearing
>>> about.
>>>
>>> This morning I unlocked it before leaving home, and noticed that load was
>>> fairly constant at about 1.0 when it should have been at 0 as the machine
>>> should have been idle. I listed processes with top and noticed that upowerd
>>> was taking up a whole CPU to itself. Normally I wouldn’t notice this daemon
>>> doing its thing.
>>>
>>> Google turned up nothing relevant.
>>>
>>> I decided to try a reboot, which cleared the upowerd problem and returned
>>> load to 0 or close to it. But now, network activity is not working. Any
>>> attempt to ping an IP address (eg my router) results in “Operation not
>>> permitted” even when run as root. Attempt to access any web page results in
>>> failing to find the site. Attempting to ping a text domain (eg
>>> www.google.com) results in an error message (instantly) saying could not
>>> resolve...
>>>
>>> It seems like networking is bejiggered suddenly on this machine. I did not
>>> install updates before rebooting, last time updates were installed was
>>> Sunday, and all has been well since then until this morning, although I did
>>> not reboot during that period until this morning. The machine is attached
>>> to my network via an Ethernet cable running to a WiFi+wired router. That is
>>> obviously working as the machine was able to get an IP address by DHCP
>>> after the reboot (ip route after reboot showed IP address correctly
>>> assigned) but unable to resolve any address and unable to ping an IP
>>> address of the form 192.168.xx.yy with the “Operation not permitted” error.
>>>
>>> All the pinging I’ve been trying worked without issues before this problem
>>> occurred, both as root and as an unprivileged user.
>>>
>>> Looking through the journalctl since my reboot, I do not see anything that
>>> obviously points to the problem. Network Manager seems to start OK, as far
>>> as I can tell. I don’t see any significant errors except postgreSQL failing
>>> to start, which is normal and I don’t use it. The first sign of trouble (to
>>> my eye, anyway) in the boot log is when services that want the network eg
>>> ntp start trying to interact with it, and failing.
>>>
>>> A second reboot produced exactly the same result. Other devices on my
>>> network are working fine.
>>>
>>> Putting the upowerd behavior together with the suddenness of this problem,
>>> I’m very afraid that this isn’t really permissions and is in fact some sort
>>> of hardware issue — the machine is 10 years old, was built by me, and has
>>> been in continuous use since it was built... Any suggestions for what I can
>>> do to diagnose?
>>>
>>> Thanks in advance
>>>
>>> Mark
>>
>> If you updated/ upgraded but did not reboot, then there could be a
>> problem with one or more upgrades.  (I try to reboot immediately after
>> upgrading to avoid delayed surprises.)
>>
>>
>> I would pull the system drive, put it into a second machine, boot it,
>> and see if the problems persist.  I would also run the system drive
>> manufacturer's diagnostic tool and test the system drive.
>>
>>
>> While testing the system drive in another machine, I would test the
>> first machine -- e.g. verify all cables fully seated, test the power
>> supply with a hardware tester, run any motherboard firmware
>> diagnostics, run software memory diagnostics, etc..
>>
>>
>> David
> 
> Wouldn't it make more sense to boot a rescue CD and see if the hardware
> works - specifically the networking?

Using a rescue CD, live CD, another system drive (USB or SATA), etc., 
would all be additional options for "test the first machine".


David

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: Sudden “operation not permitted” Marc Auslander <marcslists@gmail.com> - 2019-04-17 22:30 +0200
  Re: Sudden “operation not permitted” David Christensen <dpchrist@holgerdanske.com> - 2019-04-18 01:30 +0200

csiph-web