Groups > linux.debian.user > #198908

Re: hammerfall help request

From	Joel Roth <joelz@pobox.com>
Newsgroups	linux.debian.user
Subject	Re: hammerfall help request
Date	2018-08-17 07:20 +0200
Message-ID	<wnFl0-4yP-1@gated-at.bofh.it> (permalink)
References	<wn57P-9H-13@gated-at.bofh.it> <wngFX-6P5-1@gated-at.bofh.it> <wnvEZ-78P-5@gated-at.bofh.it> <wnzIC-1d6-7@gated-at.bofh.it> <wnAEG-1K3-9@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Fri, Aug 17, 2018 at 12:12:22AM +0000, Glenn English wrote:
> On Thu, Aug 16, 2018 at 11:09 PM, Joel Roth <joelz@pobox.com> wrote:
> 
> > Unmute and adjust signal levels
> >
> >     alsamixer -c 2
> 
> Comes up in curses with the RME selected and a single slider: DDS
> Samp. I raised that a couple steps with the 'up-arrow' button and
> exited.
> 
> > Test playback
> >
> >     aplay -D hw:2,0 testfile.wav
> 
> There is no testfile.wav, so I gave it one of mine:
> 
> root@sbox:~# aplay -D hw:2,0
> /blackHole/cdp/BeethovenSix/source_dir/disk001/track02.cdda.wav
> Playing WAVE '/blackHole/cdp/BeethovenSix/source_dir/disk001/track02.cdda.wav'
> : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
> aplay: set_params:1334: Access type not available

Hmmm.

> Went into HDSPmixer and set it to preset 2 (like I did before to get
> the 'phones to work) and tried again. Still nothing. Files like this
> have worked before, in Audacity.

Looks like you may have to dig into the documentation. This
is a professional card, with some special capabilities 
and complexities.

I also suggest you search the Linux Audio Users mailing list
archives. It's an excellent resource for any Linux audio
issues.

> Not sure what aplay means by 'Access type not available' so I looked
> on the web. I still don't.
> 
> But 'aplay -L' says, about the RME:
> 
> default:CARD=DSP
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Default Audio Device
> sysdefault:CARD=DSP
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Default Audio Device
> dmix:CARD=DSP,DEV=0
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Direct sample mixing device
> dsnoop:CARD=DSP,DEV=0
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Direct sample snooping device
> hw:CARD=DSP,DEV=0
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Direct hardware device without any conversions
> plughw:CARD=DSP,DEV=0
>     Hammerfall DSP, RME Hammerfall HDSP 9632
>     Hardware device with all software conversions
> 
> if that's any help.
 
The items are audio devices that can be used as 
a -D argument to aplay.

> -- 
> Glenn English
> 

-- 
Joel Roth

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

hammerfall help request Glenn English <ghe2001@gmail.com> - 2018-08-15 16:40 +0200
  Re: hammerfall help request Nicholas Geovanis <nickgeovanis@gmail.com> - 2018-08-15 22:50 +0200
    Re: hammerfall help request Glenn English <ghe2001@gmail.com> - 2018-08-16 21:10 +0200
      Re: hammerfall help request Thomas Amm <debili@open-email.net> - 2018-08-20 21:30 +0200
  Re: hammerfall help request Joel Roth <joelz@pobox.com> - 2018-08-16 05:00 +0200
    Re: hammerfall help request Glenn English <ghe2001@gmail.com> - 2018-08-16 21:00 +0200
      Re: hammerfall help request Joel Roth <joelz@pobox.com> - 2018-08-17 01:20 +0200
        Re: hammerfall help request Glenn English <ghe2001@gmail.com> - 2018-08-17 02:20 +0200
          Re: hammerfall help request Joel Roth <joelz@pobox.com> - 2018-08-17 07:20 +0200

csiph-web