Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.debian.user > #190411

Re: lm-sensors doesn't see the cpu rpm.....

From Michael Fothergill <michael.fothergill@gmail.com>
Newsgroups linux.debian.user
Subject Re: lm-sensors doesn't see the cpu rpm.....
Date 2017-12-28 18:00 +0100
Message-ID <v1JHb-2PZ-5@gated-at.bofh.it> (permalink)
References <v1Fax-8gH-9@gated-at.bofh.it> <v1FDz-8rd-7@gated-at.bofh.it> <v1G6H-vq-25@gated-at.bofh.it> <v1GzE-J8-17@gated-at.bofh.it> <v1GT0-QQ-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


[Multipart message — attachments visible in raw view] - view raw

On 28 December 2017 at 13:55, Greg Wooledge <wooledg@eeg.ccf.org> wrote:

> On Thu, Dec 28, 2017 at 01:11:56PM +0000, Michael Fothergill wrote:
> > root@bong:/boot#  sudo modprobe coretemp
> > modprobe: ERROR: could not insert 'coretemp': No such device
> >
> >
> > This is odd because coretemp is set as a module option in the config
> file:
> >
> > CONFIG_SENSORS_CORETEMP=m
> >
> > Comments appreciared
>
> Well, it *should* work with a standard Debian kernel and applicable
> hardware.
>

​Dear All,

It's sad but I think I need install Windows 10 on this machine to sort out
the fan control and cpu cooler problems.

This machine overheats when I run pov-ray benchmark on it and shuts down.

see here (first page only)

https://forums.gentoo.org/viewtopic-t-1056576-start-0.html


Then I can install the ASUS Fan Xpert and ROG software etc on top of the FX
990 sabertooth motherboard I have.......

I think I might need to change the thermal paste compound between the CPU
and Arctic Freezer 13 heatsink to cure the cooling problem.

I am going to use Artic MX-4 paste.

While Debian and Gentoo are OK to work with here, I cannot tolerate the
machine shutting down now and again due to overheating any longer.

I am corresponding with the ASUS technical folks at present.

I need the extra special bloodhound Passau Cathedral Organ factor here to
help check on the temps and the fan activity once I start doing
surgery on the cpu/fan-heatsink thermal interface...........

CPUs cost money.

Thanks for the help to date.

Regards

MF



​


>
> wooledg:~$ /sbin/modinfo coretemp
> filename:       /lib/modules/4.9.0-4-amd64/kernel/drivers/hwmon/coretemp.
> ko
> license:        GPL
> description:    Intel Core temperature monitor
> author:         Rudolf Marek <r.marek@assembler.cz>
> alias:          cpu:type:x86,ven0000fam*mod*:feature:*01C0*
> depends:
> intree:         Y
> vermagic:       4.9.0-4-amd64 SMP mod_unload modversions
> parm:           tjmax:TjMax value in degrees Celsius (int)
>
> Your "No such device" error sounds like it probed for hardware and didn't
> find any.  If the module itself were missing from the file system, then
> I would have expected "FATAL: Module coretemp not found in directory ...".
>
> It says "Intel" in the description.  Are you using an Intel CPU?
>
>

Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 13:10 +0100
  Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 13:40 +0100
    Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 14:10 +0100
      Re: lm-sensors doesn't see the cpu rpm..... Greg Wooledge <wooledg@eeg.ccf.org> - 2017-12-28 15:00 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 16:00 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 16:10 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 16:20 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 16:40 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 17:00 +0100
        Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 18:00 +0100
  Re: lm-sensors doesn't see the cpu rpm..... deloptes <deloptes@gmail.com> - 2017-12-28 19:20 +0100
    Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 19:50 +0100
      Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 20:00 +0100
    Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 20:20 +0100
    Re: lm-sensors doesn't see the cpu rpm..... Michael Fothergill <michael.fothergill@gmail.com> - 2017-12-28 21:20 +0100

csiph-web