Re: need help on pptp config

From	Eero Volotinen <eero.volotinen@iki.fi>
Newsgroups	linux.debian.user
Subject	Re: need help on pptp config
Date	2016-10-08 11:40 +0200
Message-ID	<spWgO-5hp-15@gated-at.bofh.it> (permalink)
References	<sprZo-Id-19@gated-at.bofh.it> <sprZo-Id-17@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

How about using graphical pptp client, like network manager?

Eero

2016-10-07 4:04 GMT+03:00 Li Wei <rootof3@yahoo.com>:

> I want to use vpn to bypass censor.
> In XP, it's OK
> In Linux I have installed and run pptp-linux:
>
> Using interface ppp0
> Connect: ppp0 <--> /dev/pts/1
> CHAP authentication succeeded
> MPPE 128-bit stateless compression enabled
> local  IP address 192.168.115.34
> remote IP address 192.168.115.1
>
> though I can visit sites not blocked by censor in Iceweasel
> I still can't visit sites blocked by censor
>
> below is by the Linux route command:
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> default         www.routerlogin 0.0.0.0         UG    0      0        0
> eth0
> 192.168.1.0     *               255.255.255.0   U     0      0        0
> eth0
>
> I think sth. is wrong. Below is by Windows XP route command:
> (Note that I have changed the real IP to 103.72.6.116.)
>
> ============================================================
> ===============
> Interface List
> 0x1 ........................... MS TCP Loopback interface
> 0x10003 ...00 19 21 d1 80 74 ...... Realtek RTL8139 Family PCI Fast
> Ethernet NIC
> 0x20004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface
> ============================================================
> ===============
> ============================================================
> ===============
> Active Routes:
> Network Destination        Netmask          Gateway       Interface  Metric
>           0.0.0.0          0.0.0.0      192.168.1.1     192.168.1.3
>  21
>           0.0.0.0          0.0.0.0   192.168.115.34  192.168.115.34       1
>      103.72.6.116  255.255.255.255      192.168.1.1     192.168.1.3
>  20
>         127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
>       192.168.1.0    255.255.255.0      192.168.1.3     192.168.1.3
>  20
>       192.168.1.3  255.255.255.255        127.0.0.1       127.0.0.1
>  20
>     192.168.1.255  255.255.255.255      192.168.1.3     192.168.1.3
>  20
>    192.168.115.34  255.255.255.255        127.0.0.1       127.0.0.1
>  50
>   192.168.115.255  255.255.255.255   192.168.115.34  192.168.115.34
>  50
>         224.0.0.0        240.0.0.0      192.168.1.3     192.168.1.3
>  20
>         224.0.0.0        240.0.0.0   192.168.115.34  192.168.115.34       1
>   255.255.255.255  255.255.255.255      192.168.1.3     192.168.1.3       1
>   255.255.255.255  255.255.255.255   192.168.115.34  192.168.115.34       1
> Default Gateway:    192.168.115.34
> ============================================================
> ===============
> Persistent Routes:
>   None
>
>
>
> What should I do to get iceweasel working?
> Thanks in advance!
>
>
>
>

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

need help on pptp config Li Wei <rootof3@yahoo.com> - 2016-10-07 03:20 +0200
  Re: need help on pptp config Pascal Hambourg <pascal@plouf.fr.eu.org> - 2016-10-07 21:20 +0200
  Re: need help on pptp config Eero Volotinen <eero.volotinen@iki.fi> - 2016-10-08 11:40 +0200

csiph-web