Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #167211

Re: [Jessie] Is there a way to delay bonding interface initalization to happen after network driver is up

Show all headers | View raw

Mariusz Gronczewski <xani@efigence.com> wrote:

> I have 2 machines(IBM servers). Both use bnx2 NIC driver but one is VERY
> slow to boot thru kernel (2.3s vs 27s)

> Config is:

> auto bond508
> allow-hotplug bond508

> iface bond508 inet  static
>     address 1.2.3.4/24
>     slaves eth0.508 eth1.508
>     bond-mode active-backup

Question, separate from your problem: Why do you bond the VLANed
interfaces instead of the raw eth0/1 and then VLAN the bond? Is there a
special reason you do it that way?

I'd expect a configuration like this:

auto bond0
iface bond0 inet manual
  bond_mode active-backup
  bond_miimon 100 
  bond_updelay 1000
  slaves eth0 eth1

auto bond0.508
iface bond0.508 inet static
  address 1.2.3.4
  netmask 255.255.255.0

Grüße,
Sven.

-- 
Sigmentation fault. Core dumped.

Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[Jessie] Is there a way to delay bonding interface initalization to  happen after network driver is up Mariusz Gronczewski <xani@efigence.com> - 2016-04-29 16:10 +0200
  Re: [Jessie] Is there a way to delay bonding interface initalization to happen after network driver is up Sven Hartge <sven@svenhartge.de> - 2016-04-29 18:00 +0200
    Re: [Jessie] Is there a way to delay bonding interface  initalization to happen after network driver is up Mariusz Gronczewski <mariusz.gronczewski@efigence.com> - 2016-05-04 14:00 +0200

csiph-web