Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.debian.user > #247204

Re: networking.service fails

From Dmitry Katsubo <dma_k@mail.ru>
Newsgroups linux.debian.user
Subject Re: networking.service fails
Date 2022-04-12 23:30 +0200
Message-ID <Ebwff-8kic-3@gated-at.bofh.it> (permalink)
References (4 earlier) <E8kaB-6ivc-9@gated-at.bofh.it> <E8o4x-6lyO-5@gated-at.bofh.it> <E8m2J-6jWt-1@gated-at.bofh.it> <EaVz3-7XXO-5@gated-at.bofh.it> <EaVz3-7XXO-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On 2022-04-11 07:56, Reco wrote:
> Good news - it explains "ifup: unknown interface eth0" messages.
> Bad news - this /e/n/i is not valid.
> 
> The reason being - both eth0 and eth1 lack interface definitions, i.e.
> have no "iface" stanzas.
> 
> If you absolutely need both eth0 and eth1 in the UP state by the time
> you create and bring up br0 you should either:
> 
> 1) Define both eth0 and eth1 in /e/n/i like this:
> 
> auto eth0
> iface eth0 inet manual
> 
> auto eth1
> iface eth1 inet manual
> 
> auto br0
> iface br0 inet static
>     address 10.0.1.100
>     gateway 10.0.1.1
>     netmask 255.0.0.0
>     bridge_ports eth0 eth1
>     bridge_maxwait 60
> 
> 2) Use pre-up and post-down hooks for br0, and remove both "auto eth0"
> and "auto eth1":
> 
> auto br0
> iface br0 inet static
>     address 10.0.1.100
>     gateway 10.0.1.1
>     netmask 255.0.0.0
>     bridge_ports eth0 eth1
>     bridge_maxwait 60
>     pre-up /sbin/ip link set eth0 up
>     pre-up /sbin/ip link set eth1 up
>     post-down /sbin/ip link set eth0 down
>     post-down /sbin/ip link set eth1 down
> 
> Reco

Hooray, it worked! Thanks for pointing out the configuration error.
After fixing it everything worked like a charm. Would be very tricky
for me to locate the issue...

If the configuration is invalid, networking.service could probably
complain about that? I would be able then to resolve the issue myself.

Just for my record the reference to documentation:

https://wiki.debian.org/BridgeNetworkConnections#Configuring_bridging_in_.2Fetc.2Fnetwork.2Finterfaces

-- 
With best regards,
Dmitry

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

Re: networking.service fails David Wright <deblis@lionunicorn.co.uk> - 2022-04-04 05:50 +0200
  Re: networking.service fails Greg Wooledge <greg@wooledge.org> - 2022-04-04 06:00 +0200
    Re: networking.service fails Reco <recoverym4n@enotuniq.net> - 2022-04-11 08:20 +0200
      Re: networking.service fails Dmitry Katsubo <dma_k@mail.ru> - 2022-04-12 23:30 +0200

csiph-web