Re: Avoid rebooting server to gain back RS232 connection

From	john doe <johndoe65534@mail.com>
Newsgroups	linux.debian.user
Subject	Re: Avoid rebooting server to gain back RS232 connection
Date	2021-12-03 08:10 +0100
Message-ID	<DqaRH-1aS-3@gated-at.bofh.it> (permalink)
References	<Dpt0m-8tt-11@gated-at.bofh.it> <DpyMq-3pG-1@gated-at.bofh.it> <DpAlc-4qq-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 12/1/2021 5:00 PM, Joe wrote:
> On Wed, 1 Dec 2021 07:10:49 -0700
> Charles Curley <charlescurley@charlescurley.com> wrote:
>
>> On Wed, 1 Dec 2021 09:14:11 +0100
>> john doe <johndoe65534@mail.com> wrote:
>>
>>> I'm using a RS232 cable to connect to a server everything is
>>> properly set up and works fine.
>>> For some reasons I lost the connection to my server that is I can
>>> not control the server using serial console.
>>
>> ...
>>
>>>
>>> In other words, how can I reconnect when the cable has been
>>> disconnected
>>
>> The first thing I would do is find out why your cable is being
>> disconnected, and see to it that it does not happen again.
>>
>> But why RS-232? Why not SSH over Internet Protocol (IP)? If it's a
>> server, it should have some sort of networking.
>>
>>
>
> Original information is indeed scarce. The OP mentions using a serial
> console, but that may have been for troubleshooting, and we do not know
> if the console is the usual client.
>
> Many proper servers have at least an option of an RS-232 connection
> into the BIOS or equivalent, allowing remote control of BIOS parameters
> and rebooting when necessary. It's an unfitted option on my HP
> microserver. Many UPS devices have an RS-232 connection to a server to
> notify of loss of mains, low battery etc. SSH would not normally be an
> alternative for these functions.
>

As Joe has hinted out, I use RS232 for debugging when I screw up my
network!!! :)

After having rebooting the server, I can confirm that plugging and
unplugging the cable works.
I'm not sure what was mest up there but all is well now!

Regarding the involuntary disconnection,, the cable was not properly
inplace which is now the case.

Thanks all for the help.

--
John Doe

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Avoid rebooting server to gain back RS232 connection john doe <johndoe65534@mail.com> - 2021-12-01 09:20 +0100
  Re: Avoid rebooting server to gain back RS232 connection deloptes <emanoil.kotsev@deloptes.org> - 2021-12-01 10:30 +0100
  Re: Avoid rebooting server to gain back RS232 connection Charles Curley <charlescurley@charlescurley.com> - 2021-12-01 15:40 +0100
    Re: Avoid rebooting server to gain back RS232 connection Joe <joe@jretrading.com> - 2021-12-01 17:10 +0100
      Re: Avoid rebooting server to gain back RS232 connection john doe <johndoe65534@mail.com> - 2021-12-03 08:10 +0100

csiph-web