How to configure the network ethernet?

From	William Torrez Corea <willitc9888@gmail.com>
Newsgroups	linux.debian.user
Subject	How to configure the network ethernet?
Date	2021-10-04 08:20 +0200
Message-ID	<D4pup-131-5@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

*Network is not managed*

enp7s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN mode DEFAULT group default qlen 1000
    link/ether e0:db:55:c2:58:45 brd ff:ff:ff:ff:ff:ff

*I replaced the iptables by nftables*

Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all  --  anywhere             anywhere
REJECT     all  --  anywhere             127.0.0.0/8          reject-with
icmp-port-unreachable
ACCEPT     all  --  anywhere             anywhere             state
RELATED,ESTABLISHED
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:http
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:https
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp
dpt:ssh
ACCEPT     icmp --  anywhere             anywhere             icmp
echo-request
LOG        all  --  anywhere             anywhere             limit: avg
5/min burst 5 LOG level debug prefix "iptables denied: "
REJECT     all  --  anywhere             anywhere             reject-with
icmp-port-unreachable

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
REJECT     all  --  anywhere             anywhere             reject-with
icmp-port-unreachable

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all  --  anywhere             anywhere

But i don't receive any *link*.
-- 

With kindest regards, William.

⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org
⠈⠳⣄⠀⠀⠀⠀

Back to linux.debian.user | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

How to configure the network ethernet? William Torrez Corea <willitc9888@gmail.com> - 2021-10-04 08:20 +0200
  Re: How to configure the network ethernet? Reco <recoverym4n@enotuniq.net> - 2021-10-04 08:30 +0200
    Re: How to configure the network ethernet? William Torrez Corea <willitc9888@gmail.com> - 2021-10-11 01:00 +0200
      Re: How to configure the network ethernet? Reco <recoverym4n@enotuniq.net> - 2021-10-11 07:50 +0200
        Re: How to configure the network ethernet? William Torrez Corea <willitc9888@gmail.com> - 2021-10-11 11:40 +0200
          Re: How to configure the network ethernet? Reco <recoverym4n@enotuniq.net> - 2021-10-11 14:50 +0200

csiph-web