Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #224901
| From | Dan Ritter <dsr@randomstring.org> |
|---|---|
| Newsgroups | linux.debian.user |
| Subject | Re: usb device constantly resets |
| Date | 2020-07-17 15:30 +0200 |
| Message-ID | <AtyB4-52M-5@gated-at.bofh.it> (permalink) |
| References | <AoT3r-3OM-9@gated-at.bofh.it> <AoTZv-4pP-1@gated-at.bofh.it> <AoUCd-4CY-5@gated-at.bofh.it> <AtyhI-4VL-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
daggs wrote: > Greetings, > > > Sent: Saturday, July 04, 2020 at 8:54 PM > > From: "daggs" <daggs@gmx.com> > > To: "Andrei POPESCU" <andreimpopescu@gmail.com> > > Cc: debian-user@lists.debian.org > > Subject: Re: usb device constantly resets > > > > Greetings Andrei, > > > > > Sent: Saturday, July 04, 2020 at 8:10 PM > > > From: "Andrei POPESCU" <andreimpopescu@gmail.com> > > > To: debian-user@lists.debian.org > > > Subject: Re: usb device constantly resets > > > > > > On Sb, 04 iul 20, 18:16:20, daggs wrote: > > > > Greetings, > > > > > > > > I'm running server with Debian 10 installed on it. > > > > the os is installed on a usb. the board is an asus H110M-A/M.2. > > > > the server runs a vm 24/7 on kvm (qemu 1:3.1+dfsg-8+deb10u5, libvirt-daemon 5.0.0-4+deb10u1), the server has a pass-trough usb wifi device (Ralink RT5572 Wireless Adapter) which fails loading, there is the error from the vm: > > > > [77248.176468] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' > > > > [77248.178889] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 > > > > [77248.764079] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x18d8 with error -110 > > > > [77248.840436] ieee80211 phy1: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting > > > > [77248.850119] ieee80211 phy1: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) > > > > > > > > I assumed this is a vm issue but I saw dmesg is filled with these: > > > > usb 1-2: reset high-speed USB device number 3 using xhci_hcd > > > > > > > > using sysfs and lsusb -D I found out it is the wireless device passed to the vm. > > > > the kernel I'm using is 4.19.67-2+deb10u2. > > > > > > > > any ideas how to solve this issue as I cannot use the wifi usb in the vm guest? > > > > > > > the device serves as AP so it is a bit hard to test the same functionality, I'll try to see if it connects to another wireless network and report back. > > > > Thanks, > > > > Dagg. > > > Does the device work if you don't pass it on to the VM? > > > > > I got a router, configured it and tried to connect the setup as client rather than ap from debian host, after 39 mintues I have ping, ip and no errors in dmesg. > > so I assume this is a libvirt issue correct? should I try to upgrade the vm env to testing? show stable is it? if it fails, I'm left out with network at all... > iw list | grep "Supported interface modes" -A 8 Does it show an AP mode? There are quite a few wifi devices which don't support AP mode at all. -dsr-
Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
usb device constantly resets daggs <daggs@gmx.com> - 2020-07-04 18:20 +0200
Re: usb device constantly resets Andrei POPESCU <andreimpopescu@gmail.com> - 2020-07-04 19:20 +0200
Re: usb device constantly resets daggs <daggs@gmx.com> - 2020-07-04 20:00 +0200
Re: usb device constantly resets daggs <daggs@gmx.com> - 2020-07-17 15:10 +0200
Re: usb device constantly resets Dan Ritter <dsr@randomstring.org> - 2020-07-17 15:30 +0200
Re: usb device constantly resets daggs <daggs@gmx.com> - 2020-07-17 16:20 +0200
csiph-web