Re: Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ...

From	Michael Stone <mstone@debian.org>
Newsgroups	linux.debian.user
Subject	Re: Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ...
Date	2020-09-08 23:10 +0200
Message-ID	<AMT2i-oj-1@gated-at.bofh.it> (permalink)
References	<AMP8l-6cx-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Tue, Sep 08, 2020 at 12:53:00PM -0400, rhkramer@gmail.com wrote:
>Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes
>that leaves room for whatever may need to be at the beginning of the disk
>(like maybe the MBR, or LILO, or ???)?

The current basic default is 1MByte. This is on a 512byte boundary, a 
4kbyte boundary, and is relatively aligned with SSD erase blocks 
(typically 4MB or 16MB). It also is (IIRC) the windows default, so it's 
more likely that drive manufactuers have tested/optimized for that value 
than for any other. The default may be different in some cases, if the 
drive suggests a different alignment value. (E.g., on a RAID volume.)
There's also simply no reason to choose a smaller value on a modern 
disk.

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ... rhkramer@gmail.com - 2020-09-08 19:00 +0200
  Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... Tixy <tixy@yxit.co.uk> - 2020-09-08 19:00 +0200
  Re: Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ... rhkramer@gmail.com - 2020-09-08 19:00 +0200
    Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-08 22:40 +0200
      Re: Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ... rhkramer@gmail.com - 2020-09-08 23:50 +0200
        Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-09 00:50 +0200
        Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Wright <deblis@lionunicorn.co.uk> - 2020-09-09 17:10 +0200
          Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-10 03:30 +0200
            Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David <bouncingcats@gmail.com> - 2020-09-10 08:10 +0200
              Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Wright <deblis@lionunicorn.co.uk> - 2020-09-10 18:50 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-11 00:40 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David <bouncingcats@gmail.com> - 2020-09-11 05:10 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-11 06:20 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Wright <deblis@lionunicorn.co.uk> - 2020-09-11 16:30 +0200
              Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-11 01:20 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David <bouncingcats@gmail.com> - 2020-09-11 05:50 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Wright <deblis@lionunicorn.co.uk> - 2020-09-11 16:30 +0200
                Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Christensen <dpchrist@holgerdanske.com> - 2020-09-11 22:10 +0200
        Re: Why start the first partition at 2 MIB, why not at any multiple of 4096 bytes ... Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2020-09-09 17:20 +0200
          Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... David Wright <deblis@lionunicorn.co.uk> - 2020-09-09 18:30 +0200
            Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2020-09-09 19:10 +0200
  Re: Why start the first partition at 2 MIB, why not at any multiple  of 4096 bytes ... Michael Stone <mstone@debian.org> - 2020-09-08 23:10 +0200

csiph-web