Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.kernel > #63321 > unrolled thread

Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input.

Back to article view | Back to linux.debian.kernel

Contents

  Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input. peter@easthope.ca - 2019-02-11 20:00 +0100
    Processed: Re: Bug#922072: linux-image-4.9.0-3-686-pae: A  Hauppauge PVR-150 fails obtain any image when a camera is conneted to the  composite video input. "Debian Bug Tracking System" <owner@bugs.debian.org> - 2019-02-11 21:40 +0100
    Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input. Ben Hutchings <ben@decadent.org.uk> - 2019-02-11 21:40 +0100
    Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is connected to the composite video input. peter@easthope.ca - 2019-07-04 01:30 +0200
    Bug#922072: Failure of Hauppauge PVR-150 to obtain any image from a camera connected to the composite video input. peter@easthope.ca - 2019-08-16 00:00 +0200
    Bug#922072: Failure of Hauppauge PVR-150 to obtain any image from a camera connected to the composite  peter@easthope.ca - 2019-08-16 00:50 +0200

#63321 — Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input.

Package: src:linux
Version: 4.9.30-2+deb9u5
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?  Video capture card not capturing video.
   * What exactly did you do (or not do) that was effective (or
     ineffective)?  Connected a camera and looked for an image with qv4l2; no image was found.
   * What was the outcome of this action?  No image was found.
   * What outcome did you expect instead?  I expected to see an image in qv4l2.

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686-pae root=UUID=ae5f8bf4-b2a2-4b10-8da2-922d9f4e6e91 ro reboot=bios quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information

** Loaded modules:
fuse
nf_log_ipv4
nf_log_common
xt_LOG
xt_nat
ipt_MASQUERADE
nf_nat_masquerade_ipv4
xt_recent
xt_comment
iptable_nat
nf_nat_ipv4
ipt_REJECT
nf_reject_ipv4
xt_addrtype
xt_mark
iptable_mangle
xt_tcpudp
xt_CT
appletalk
iptable_raw
ax25
ipx
xt_multiport
p8023
p8022
psnap
llc
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_nat_tftp
nf_nat_snmp_basic
nf_conntrack_snmp
nf_nat_sip
nf_nat_pptp
nf_nat_proto_gre
nf_nat_irc
nf_nat_h323
nf_nat_ftp
nf_nat_amanda
ts_kmp
nf_conntrack_amanda
nf_nat
nf_conntrack_sane
nf_conntrack_tftp
nf_conntrack_sip
nf_conntrack_proto_udplite
nf_conntrack_proto_sctp
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_conntrack_netlink
nfnetlink
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_conntrack_irc
nf_conntrack_h323
nf_conntrack_ftp
nf_conntrack
iptable_filter
binfmt_misc
snd_usb_audio
radeon
snd_usbmidi_lib
snd_hwdep
snd_rawmidi
pegasus
snd_seq_device
intel_powerclamp
snd_pcm
snd_timer
snd
soundcore
pcspkr
ttm
drm_kms_helper
evdev
serio_raw
drm
i2c_algo_bit
sg
shpchp
button
acpi_cpufreq
nfsd
auth_rpcgss
oid_registry
nfs_acl
lockd
grace
loop
firewire_sbp2
sunrpc
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
xts
lrw
gf128mul
ablk_helper
cryptd
aes_i586
mbcache
uas
usb_storage
sd_mod
ata_generic
hid_generic
usbhid
hid
sata_sis
psmouse
ohci_pci
pata_sis
firewire_ohci
aic7xxx
scsi_transport_spi
libata
firewire_core
crc_itu_t
ehci_pci
ohci_hcd
ehci_hcd
sis900
mii
usbcore
usb_common
scsi_mod
i2c_sis630
floppy
fan
thermal

** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host [1039:0661] (rev 11)
	Subsystem: Foxconn International, Inc. 661FX/M661FX/M661MX Host [105b:0c56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-sis

00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e4000000-e40fffff
	Prefetchable memory behind bridge: c0000000-dfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] LPC Controller [1039:0964] (rev 36)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: i2c_sis630

00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513] (rev 01) (prog-if 80 [Master])
	Subsystem: Foxconn International, Inc. 5513 IDE Controller [105b:0c56]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128
	Interrupt: pin ? routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 4000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_sis
	Kernel modules: pata_sis, ata_generic

00:03.0 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. USB 1.1 Controller [105b:0c56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at e412f000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:03.1 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. USB 1.1 Controller [105b:0c56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at e4134000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:03.2 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. USB 1.1 Controller [105b:0c56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at e4136000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
	Subsystem: Foxconn International, Inc. SiS900 PCI Fast Ethernet [105b:0c56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (13000ns min, 2750ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at e000 [size=256]
	Region 1: Memory at e412c000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: sis900
	Kernel modules: sis900

00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA  [SiS] [1039:0180] (rev 01) (prog-if 85 [Master SecO PriO])
	Subsystem: Foxconn International, Inc. RAID bus controller 180 SATA/PATA  [SiS] [105b:0c56]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at e100 [size=8]
	Region 1: I/O ports at e200 [size=4]
	Region 2: I/O ports at e300 [size=8]
	Region 3: I/O ports at e400 [size=4]
	Region 4: I/O ports at e500 [size=16]
	Region 5: I/O ports at 0000
	Capabilities: <access denied>
	Kernel driver in use: sata_sis
	Kernel modules: sata_sis, ata_generic

00:08.0 SCSI storage controller [0100]: Adaptec AIC-7870P/7881U [AHA-2940U/UW/D/S76] [9004:8178]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at e600 [disabled] [size=256]
	Region 1: Memory at e412d000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 20020000 [disabled] [size=64K]
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

00:09.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV23 IEEE-1394 Controller [104c:8019] (prog-if 10 [OHCI])
	Subsystem: Texas Instruments TSB12LV23 IEEE-1394 Controller [104c:8010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at e412e000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e4128000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

00:0a.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: Adaptec OHCI USB Controller [9005:0012]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e4130000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:0a.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: Adaptec OHCI USB Controller [9005:0012]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at e4131000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:0a.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Adaptec uPD72010x USB 2.0 Controller [9005:001c]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 17
	Region 0: Memory at e4132000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:0a.3 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
	Subsystem: Adaptec TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [9005:0039]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e4133000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e4120000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel modules: firewire_ohci

00:0d.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [105b:0c62]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e4135000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e4124000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV360 [Radeon 9600/X1050 Series] [1002:4152] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited / Sapphire Technology Radeon 9600XT [174b:7c29]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at d000 [size=256]
	Region 2: Memory at e4030000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon
	Kernel modules: radeonfb, radeon

01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV350 [Radeon 9600/X1050 Series] (Secondary) [1002:4172]
	Subsystem: PC Partner Limited / Sapphire Technology Radeon 9600XT (Secondary) [174b:7c28]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled] [size=256M]
	Region 1: Memory at e4020000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <access denied>


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0bda:0326 Realtek Semiconductor Corp. 
Bus 003 Device 002: ID 050d:0121 Belkin Components F5D5050 100Mbps Ethernet
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0d8c:0008 C-Media Electronics, Inc. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 9.6
  APT prefers oldstable-updates
  APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: i386 (i686)

Kernel: Linux 4.9.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-3-686-pae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-3-686-pae recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-3-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5+deb9u1
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-3-686-pae is related to:
ii  firmware-amd-graphics     20161130-4
ii  firmware-atheros          20161130-4
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
ii  firmware-ivtv             20161130-4
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20161130-4
ii  firmware-misc-nonfree     20161130-4
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- debconf-show failed

-- 
Message composed and transmitted by software designed to avoid the 
complication and vulnerability of antivirus software.

123456789 123456789 123456789 123456789 123456789 123456789 123456789
Tel: +1 360 639 0202                                  +1 
http://easthope.ca/Peter.html              Bcc: peter at easthope. ca

[toc] | [next] | [standalone]

#63322 — Processed: Re: Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input.

Processing control commands:

> tag -1 moreinfo
Bug #922072 [src:linux] linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is conneted to the composite video input.
Added tag(s) moreinfo.

-- 
922072: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=922072
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

[toc] | [prev] | [next] | [standalone]

#63323

[Multipart message — attachments visible in raw view] — view raw

Control: tag -1 moreinfo

The current kernel version in stable is 4.9.130-2, while you are
running a much older version.  Please install the available updates and
re-test.

Note that "apt-get upgrade" does *not* install all available updates;
you must use the --with-new-pkgs option.

Ben.

-- 
Ben Hutchings
The world is coming to an end.	Please log off.

[toc] | [prev] | [next] | [standalone]

#64375 — Bug#922072: linux-image-4.9.0-3-686-pae: A Hauppauge PVR-150 fails obtain any image when a camera is connected to the composite video input.

From: Ben Hutchings <ben@decadent.org.uk>
Date: Mon, 11 Feb 2019 20:27:24 +0000
> The current kernel version in stable is 4.9.130-2, while you are
> running a much older version.  Please install the available updates and
> re-test.

Right oh. 
 
... 
...

peter@imager:~$ uname -a
Linux imager 4.9.0-9-686-pae #1 SMP Debian 4.9.168-1+deb9u3 (2019-06-16) i686 GNU/Linux

> Note that "apt-get upgrade" does *not* install all available updates;
> you must use the --with-new-pkgs option.

apt-get --with-new-pkgs upgrade

Before trying the Hauppauge card again, I plugged a Logitech USB 
camera. On the target machine, imager, cheese gives a segfault. On my 
desktop workstation the same camera with cheese gives an image.
A seg fault strikes me as undesirable.

The target machine has a Hauppauge PVR-150 card with an old video 
camera connected to the yellow RCA by a coaxial cable.

peter@imager:~$ v4l2-ctl --list-devices
Hauppauge WinTV PVR-150 (PCI:0000:01:04.0):
        /dev/video1
        /dev/video25
        /dev/video33
        /dev/radio1
        /dev/vbi1

Failed to open /dev/video0: No such file or directory
peter@imager:~$

qv4l2 -d /dev/video1
and
qv4l2 -d /dev/video25
give black viewers.

qv4l2 -d /dev/video33
gives a viewer with low-density multi-colored snow.

qv4l2 -d /dev/vbi1
gives a horizontal ribbon with low-density multi-colored snow.

Any ideas appreciated.

Thanks,                Peter E.


-- 
https://en.wikibooks.org/wiki/Oberon
Tel: +1 604 670 0140            Bcc: peter at easthope. ca

[toc] | [prev] | [next] | [standalone]

#64779 — Bug#922072: Failure of Hauppauge PVR-150 to obtain any image from a camera connected to the composite video input.

From: Ben Hutchings <ben@decadent.org.uk>
Date: Mon, 11 Feb 2019 20:27:24 +0000
> The current kernel version in stable is 4.9.130-2, while you are
> running a much older version.  Please install the available updates and
> re-test.

After upgrading Debian 9 => 10 ...

peter@dalton:~$ uname -a
Linux dalton 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08) i686

Still no evidence of any functionality in the Hauppauge card.
Not even a dimming of the display when the lens opening is covered.

When the setup was first tested over a year back, there was evidence 
of a crude image at least.  Now nothing.

Any suggestions for troubleshooting?  Some reliable way of testing 
for a signal at the composite connector?  Detected by the PVR?

Thanks,                 ... Peter E.

-- 
https://en.wikibooks.org/wiki/Oberon
Tel: +1 604 670 0140            Bcc: peter at easthope. ca

[toc] | [prev] | [next] | [standalone]

#64780 — Bug#922072: Failure of Hauppauge PVR-150 to obtain any image from a camera connected to the composite

Also, a Logitech camera is detected but fails to produce an image.

peter@imager:~$ v4l2-ctl --list-devices
Hauppauge WinTV PVR-150 (PCI:0000:01:04.0):
	/dev/video0
	/dev/video24
	/dev/video32
	/dev/radio0
	/dev/vbi0

UVC Camera (046d:0807) (usb-0000:00:1d.7-4):
	/dev/video1
	/dev/video2

peter@imager:~$ qv4l2 -d /dev/video1
OpenGL Error 0x500: InitializeGL.
OpenGL Error 0x501: YUY2 shader.
Could not create shader of type 2.
OpenGL Error: YUY2 shader compilation failed.
OpenGL Error 0x500: YUY2 paint.
OpenGL Error 0x502: YUY2 paint.
  ...

"OpenGL Error 0x502: YUY2 paint." is repeated until qv4l2 is 
interrupted. I don't understand the significance of the shader.

Thanks,                                    ... P.

-- 
https://en.wikibooks.org/wiki/Oberon
Tel: +1 604 670 0140            Bcc: peter at easthope. ca

[toc] | [prev] | [standalone]

Back to top | Article view | linux.debian.kernel

csiph-web