Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #64224 > unrolled thread
| Started by | Leon Gehling <leon.gehling@datenwanderung.de> |
|---|---|
| First post | 2019-06-05 14:10 +0200 |
| Last post | 2019-06-10 22:40 +0200 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.debian.kernel
Bug#930029: linux-image-4.19.0-5-amd64: Kernel stucks at load initramfs on ASUS KGPE-D16 Leon Gehling <leon.gehling@datenwanderung.de> - 2019-06-05 14:10 +0200
Bug#930029: Some extra output with earlyprintk set Leon Gehling <leon.gehling@datenwanderung.de> - 2019-06-10 22:40 +0200
| From | Leon Gehling <leon.gehling@datenwanderung.de> |
|---|---|
| Date | 2019-06-05 14:10 +0200 |
| Subject | Bug#930029: linux-image-4.19.0-5-amd64: Kernel stucks at load initramfs on ASUS KGPE-D16 |
| Message-ID | <y5CTT-5dz-1@gated-at.bofh.it> |
Package: src:linux
Version: 4.19.37-3
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
System not bootable.
Kernel stucks at loading initramfs. no debug output shown or accesible
Corebooted KGPE-D16
Kernel 4.9 from stretch works flawless
This is a really important Platform for FOSS Projects. Pls do something
about this.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: ASUS
product_name: KGPE-D16
product_version: 1.0
chassis_vendor: ASUS
chassis_version:
bios_vendor: coreboot
bios_version: 4.9-1859-gf3510cbe36
board_vendor: ASUS
board_name: KGPE-D16
board_version: 1.0
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part [1002:5a10]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx+
NUMA node: 0
Capabilities: <access denied>
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fcc00000-fccfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fcd00000-fcdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fce00000-fcefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0b.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD990 PCI to PCI bridge (PCI Express GFX2 port 0) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0c.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD990 PCI to PCI bridge (PCI Express GFX2 port 1) [1002:5a20] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0d.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP2 Port 0) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
NUMA node: 0
Bus: primary=00, secondary=07, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fc900000-fcbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4394] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1043:8163]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: I/O ports at 6020 [size=8]
Region 1: I/O ports at 6040 [size=4]
Region 2: I/O ports at 6028 [size=8]
Region 3: I/O ports at 6044 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at fcf0d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcf08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcf09000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fcf0e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcf0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcf0b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
NUMA node: 0
Region 0: Memory at fcf0f000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3d)
Subsystem: ASUSTeK Computer Inc. SBx00 SMBus Controller [1043:8163]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 IDE Controller [1043:8163]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 6010 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at fcf04000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 LPC host controller [1043:8163]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fc000000-fc8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1043:8163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at fcf0c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:19.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
00:19.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
00:19.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:19.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
Capabilities: <access denied>
Kernel modules: fam15h_power
00:19.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 1
01:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06)
Subsystem: Hewlett-Packard Company NC360T PCI Express Dual Port Gigabit Server Adapter [103c:7044]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
NUMA node: 0
Region 0: Memory at fcc00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fcc20000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 1000 [size=32]
Expansion ROM at fcc40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06)
Subsystem: Hewlett-Packard Company NC360T PCI Express Dual Port Gigabit Server Adapter [103c:7044]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 55
NUMA node: 0
Region 0: Memory at fcc60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fcc80000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 1020 [size=32]
Expansion ROM at fcca0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:8369]
Physical Slot: 9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
NUMA node: 0
Region 0: Memory at fcd00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at fcd20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:8369]
Physical Slot: 10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 61
NUMA node: 0
Region 0: Memory at fce00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 3000 [size=32]
Region 3: Memory at fce20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
07:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Physical Slot: 13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
NUMA node: 0
Region 0: Memory at fcb00000 (32-bit, non-prefetchable) [size=128K]
Bus: primary=07, secondary=08, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fc900000-fcafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
NUMA node: 0
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fc900000-fc9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:05.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
NUMA node: 0
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fca00000-fcafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:07.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
NUMA node: 0
Bus: primary=08, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:09.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch [10b5:8608] (rev ba) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
NUMA node: 0
Bus: primary=08, secondary=0c, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
09:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Region 0: Memory at fc900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
0a:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller [1b4b:9120] (rev 12) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 88SE9120 SATA 6Gb/s Controller [1043:8400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 56
NUMA node: 0
Region 0: I/O ports at 4010 [size=8]
Region 1: I/O ports at 4020 [size=4]
Region 2: I/O ports at 4018 [size=8]
Region 3: I/O ports at 4024 [size=4]
Region 4: I/O ports at 4000 [size=16]
Region 5: Memory at fca10000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fca00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
0d:01.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 10) (prog-if 00 [VGA controller])
Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at fc800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 5000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: ast
Kernel modules: ast
0d:02.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. FW322/323 [TrueFire] 1394a Controller [1043:8259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at fc820000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-9-amd64 (SMP w/16 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.19.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-18
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-5-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[toc] | [next] | [standalone]
| From | Leon Gehling <leon.gehling@datenwanderung.de> |
|---|---|
| Date | 2019-06-10 22:40 +0200 |
| Subject | Bug#930029: Some extra output with earlyprintk set |
| Message-ID | <y7zfc-1Lb-7@gated-at.bofh.it> |
| In reply to | #64224 |
oading Linux 4.19.0-5-amd64 ...Loading Linux 4.19.0-5-amd64 .. . Loading initial ramdisk ...Loading initial ramdisk .. . [ 0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (g) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=0 [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point reg' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7d97fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7d98000-0x00000000b7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfffb000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fcf00000-0x00000000fcf03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000438000000-0x000000043fffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS KGPE-D16/KGPE-D16, BIOS 4.9-1859-gf3510cbe36 05/31/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2500.121 MHz processor [ 0.010404] AGP: No AGP bridge found [ 0.013881] last_pfn = 0x438000 max_arch_pfn = 0x400000000 [ 0.021404] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Memory KASLR using RDTSC... [ 0.030856] last_pfn = 0xbfffb max_arch_pfn = 0x400000000 [ 0.042030] Using GB pages for direct mapping [ 0.046429] RAMDISK: [mem 0x3476f000-0x363aefff] [ 0.050877] ACPI: Early table checksum verification disabled [ 0.056563] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) [ 0.062225] ACPI: XSDT 0x00000000B7D990E0 000074 (v01 COREv4 COREBOOT 000000) [ 0.070720] ACPI: FACP 0x00000000B7D9B9A0 0000F4 (v03 COREv4 COREBOOT 000000) [ 0.079213] ACPI: DSDT 0x00000000B7D99280 00271A (v02 COREv4 COREBOOT 000000) [ 0.087704] ACPI: FACS 0x00000000B7D99240 000040 [ 0.092298] ACPI: FACS 0x00000000B7D99240 000040 [ 0.096890] ACPI: SSDT 0x00000000B7D9BAA0 0020F2 (v02 COREv4 COREBOOT 000000) [ 0.105383] ACPI: MCFG 0x00000000B7D9DBA0 00003C (v01 COREv4 COREBOOT 000000) [ 0.113875] ACPI: APIC 0x00000000B7D9DBE0 0000DE (v02 COREv4 COREBOOT 000000) [ 0.122369] ACPI: SRAT 0x00000000B7D9DCC0 0001A8 (v01 COREv4 COREBOOT 000000) [ 0.130862] ACPI: SLIT 0x00000000B7D9DE68 000030 (v01 COREv4 COREBOOT 000000) [ 0.139355] ACPI: SRAT 0x00000000B7D9DEA0 0001A8 (v01 COREv4 COREBOOT 000000) [ 0.147848] ACPI: SLIT 0x00000000B7D9E048 000030 (v01 COREv4 COREBOOT 000000) [ 0.156341] ACPI: IVRS 0x00000000B7D9E080 0000BC (v01 COREv4 COREBOOT 000000) [ 0.164834] ACPI: HPET 0x00000000B7D9E140 000038 (v01 COREv4 COREBOOT 000000) [ 0.173380] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.177747] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.182167] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.186586] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.191006] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.195426] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.199845] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.204264] SRAT: PXM 0 -> APIC 0x07 -> Node 0 [ 0.208685] SRAT: PXM 1 -> APIC 0x08 -> Node 1 [ 0.213104] SRAT: PXM 1 -> APIC 0x09 -> Node 1 [ 0.217525] SRAT: PXM 1 -> APIC 0x0a -> Node 1 [ 0.221944] SRAT: PXM 1 -> APIC 0x0b -> Node 1 [ 0.226364] SRAT: PXM 1 -> APIC 0x0c -> Node 1 [ 0.230784] SRAT: PXM 1 -> APIC 0x0d -> Node 1 [ 0.235204] SRAT: PXM 1 -> APIC 0x0e -> Node 1 [ 0.239624] SRAT: PXM 1 -> APIC 0x0f -> Node 1 [ 0.244046] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.250025] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0xbfffffff] [ 0.256004] ACPI: SRAT: Node 1 PXM 1 [mem 0x100000000-0x43fffffff] [ 0.262162] NUMA: Node 1 [mem 0x00100000-0xbfffffff] + [mem 0x100000000-0x43] [ 0.272647] NODE_DATA(1) allocated [mem 0x437ff8000-0x437ffcfff] [ 0.278660] node 0 must be removed before remove section 134 [ 0.284272] Zone ranges: [ 0.286769] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.292922] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.299075] Normal [mem 0x0000000100000000-0x0000000437ffffff] [ 0.305228] Device empty [ 0.308088] Movable zone start for each node [ 0.312335] Early memory node ranges [ 0.315888] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.322128] node 1: [mem 0x0000000000100000-0x00000000b7d97fff] [ 0.328368] node 1: [mem 0x00000000b8000000-0x00000000bfffafff] [ 0.334607] node 1: [mem 0x0000000100000000-0x0000000437ffffff] [ 0.340850] Reserved but unavailable: 98 pages [ 0.340852] Initmem setup node 1 [mem 0x0000000000100000-0x0000000437ffffff] [ 0.466889] ACPI: PM-Timer IO Port: 0x820 [ 0.470732] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.476453] IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23 [ 0.483376] IOAPIC[1]: apic_id 33, version 33, address 0xfd000000, GSI 24-55 [ 0.490395] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.496721] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.503224] Using ACPI (MADT) for SMP configuration information [ 0.509114] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.514232] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.519255] NODE_DATA(0) allocated [mem 0x00093000-0x00097fff] [ 0.525066] Initmem setup node 0 [mem 0x0000000000001000-0x000000000009efff] [ 0.532110] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.538492] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.544905] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.551318] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.557733] PM: Registered nosave memory: [mem 0xb7d98000-0xb7ffffff] [ 0.564146] PM: Registered nosave memory: [mem 0xbfffb000-0xcfffffff] [ 0.570558] PM: Registered nosave memory: [mem 0xd0000000-0xfcefffff] [ 0.576971] PM: Registered nosave memory: [mem 0xfcf00000-0xfcf03fff] [ 0.583384] PM: Registered nosave memory: [mem 0xfcf04000-0xfeafffff] [ 0.589797] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff] [ 0.596209] PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff] [ 0.602622] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.609035] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.615449] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.621862] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.628275] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.634688] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] [ 0.641103] [mem 0xd0000000-0xfcefffff] available for PCI devices [ 0.647167] Booting paravirtualized kernel on bare hardware [ 0.652717] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xfffs [ 0.795517] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_n2 [ 0.804648] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u262144 [ 0.811044] Built 2 zonelists, mobility grouping on. Total pages: 4095761 [ 0.817843] Policy zone: Normal [ 0.820965] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 roo0 [ 0.854959] AGP: Checking aperture... [ 0.866845] AGP: No AGP bridge found [ 0.870252] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB) [ 0.877011] AGP: Node 1: aperture [bus addr 0xf8000000-0xfbffffff] (64MB) [ 0.975916] Memory: 16260640K/16643268K available (10252K kernel code, 1242K) [ 0.989765] BUG: unable to handle kernel NULL pointer dereference at 00000000 [ 0.997523] PGD 0 P4D 0 [ 1.000037] Oops: 0002 [#1] SMP NOPTI [ 1.003678] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-5-amd64 #1 Debian3 [ 1.011562] Hardware name: ASUS KGPE-D16/KGPE-D16, BIOS 4.9-1859-gf3510cbe369 [ 1.019541] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 1.023869] Code: 01 00 00 75 05 48 89 d8 5b c3 e8 1f f7 9a ff eb f4 66 66 2b [ 1.042588] RSP: 0000:ffffffff91803e08 EFLAGS: 00010046 [ 1.047788] RAX: 0000000000000000 RBX: ffff996c80083d80 RCX: 4132840b73c45ab1 [ 1.054893] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 [ 1.061999] RBP: ffffffff91803ec8 R08: ffff996c80080000 R09: ffff996c80083d80 [ 1.069107] R10: 0000000000000000 R11: ffff996c80080000 R12: ffffed5880002000 [ 1.076213] R13: 00000000802a0002 R14: 0000000000000001 R15: ffff996c80083c00 [ 1.083320] FS: 0000000000000000(0000) GS:ffff9970a7c00000(0000) knlGS:00000 [ 1.091380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.097098] CR2: 0000000000000000 CR3: 0000000023c0a000 CR4: 00000000000406b0 [ 1.104206] Call Trace: [ 1.106638] deactivate_slab.isra.71+0x2d2/0x630 [ 1.111232] ? bootstrap+0x1f/0x12c [ 1.114693] ? kmem_cache_alloc+0x1b8/0x1c0 [ 1.118854] bootstrap+0x66/0x12c [ 1.122148] kmem_cache_init+0x8c/0x145 [ 1.125962] start_kernel+0x2a6/0x52c [ 1.129602] secondary_startup_64+0xa4/0xb0 [ 1.133759] Modules linked in: [ 1.136791] CR2: 0000000000000000 [ 1.140094] ---[ end trace a6e00f6a2ecfb185 ]--- [ 1.144679] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 1.149011] Code: 01 00 00 75 05 48 89 d8 5b c3 e8 1f f7 9a ff eb f4 66 66 2b [ 1.167730] RSP: 0000:ffffffff91803e08 EFLAGS: 00010046 [ 1.172929] RAX: 0000000000000000 RBX: ffff996c80083d80 RCX: 4132840b73c45ab1 [ 1.180036] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 [ 1.187143] RBP: ffffffff91803ec8 R08: ffff996c80080000 R09: ffff996c80083d80 [ 1.194248] R10: 0000000000000000 R11: ffff996c80080000 R12: ffffed5880002000 [ 1.201355] R13: 00000000802a0002 R14: 0000000000000001 R15: ffff996c80083c00 [ 1.208462] FS: 0000000000000000(0000) GS:ffff9970a7c00000(0000) knlGS:00000 [ 1.216520] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.222241] CR2: 0000000000000000 CR3: 0000000023c0a000 CR4: 00000000000406b0 [ 1.229350] Kernel panic - not syncing: Attempted to kill the idle task! [ 1.236028] ---[ end Kernel panic - not syncing: Attempted to kill the idle - [ 1.243910] PANIC: double fault, error_code: 0xffffffff9087cc95 [ 1.249801] CPU: 0 PID: 0 Comm: swapper Tainted: G D 4.19.0-53 [ 1.259073] Hardware name: ASUS KGPE-D16/KGPE-D16, BIOS 4.9-1859-gf3510cbe369 [ 1.267048] RIP: 0246:0x10 [ 1.269732] Code: Bad RIP value. [ 1.272939] RSP: 0000:0000000000000000 EFLAGS: ffffffff91803e58 [ 1.278832] RAX: 000000000000004a RBX: ffffffff91813700 RCX: ffffffff9184dda8 [ 1.285938] RDX: 0000000000000000 RSI: 0000000000000096 RDI: 0000000000000046 [ 1.293045] RBP: ffffffff91803ec8 R08: 00000000000000d2 R09: 2d2d2d5d20216b73 [ 1.300151] R10: 74206c6c696b206f R11: 20656c6469206568 R12: 0000000000000000 [ 1.307257] R13: 0000000000000000 R14: 0000000000000009 R15: 0000000000000001 [ 1.314364] FS: 0000000000000000 GS: 0000000000000000 [ 1.319564] Kernel panic - not syncing: Machine halted. [ 1.324770] ---[ end Kernel panic - not syncing: Machine halted. ]---
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.kernel
csiph-web