Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #63866 > unrolled thread
| Started by | Octavio Alvarez <octalbts@alvarezp.org> |
|---|---|
| First post | 2019-04-15 03:20 +0200 |
| Last post | 2019-05-03 19:20 +0200 |
| Articles | 5 — 3 participants |
Back to article view | Back to linux.debian.kernel
Bug#927091: linux-image-5.0.0-trunk-amd64: Broken scrollwheel after upgrade Octavio Alvarez <octalbts@alvarezp.org> - 2019-04-15 03:20 +0200
Bug#927091: Marcelo Terres <mhterres@gmail.com> - 2019-04-20 11:40 +0200
Bug#927091: linux-image-5.0.0-trunk-amd64: Broken scrollwheel after upgrade Octavio Alvarez <octalbts@alvarezp.org> - 2019-04-24 10:40 +0200
Bug#927091: linux-image-5.0.0-trunk-amd64: Broken scrollwheel after upgrade octalbts@alvarezp.org - 2019-04-24 10:50 +0200
Bug#927091: linux-image-5.0.0-trunk-amd64: Broken scrollwheel after upgrade Octavio Alvarez <octalbts@alvarezp.org> - 2019-05-03 19:20 +0200
| From | Octavio Alvarez <octalbts@alvarezp.org> |
|---|---|
| Date | 2019-04-15 03:20 +0200 |
| Subject | Bug#927091: linux-image-5.0.0-trunk-amd64: Broken scrollwheel after upgrade |
| Message-ID | <xMYrT-5IP-1@gated-at.bofh.it> |
Package: src:linux
Version: 5.0.2-1~exp1
Severity: normal
Dear Maintainer,
After upgrading from 4.19 to 5.0 (experimental) the scrollwheel is
slow. It takes about 20 steps to get the equivalent of a single step
from 4.19.
The mouse is a USB Microsft Wireless Mobile Mouse 3000:
Bus 002 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse
6000 Receiver
(Please find lsusb -vvv information after the evtest info for the mouse)
I tried solaar, imwheel, resetmsmice, none worked. I ran evtest in both
versions and did two steps down and then two steps up:
Version 4.19:
$ sudo evtest
[sudo] password for alvarezp:
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: AT Translated Set 2 keyboard
/dev/input/event1: Microsoft Microsoft Notebook Receiver v2.0 Consumer
Control
/dev/input/event2: Microsoft Microsoft Notebook Receiver v2.0 Mouse
/dev/input/event3: ETPS/2 Elantech Touchpad
/dev/input/event4: PC Speaker
/dev/input/event5: Lid Switch
/dev/input/event6: Power Button
/dev/input/event7: Sleep Button
/dev/input/event8: Power Button
/dev/input/event9: Video Bus
/dev/input/event10: HDA Intel MID Mic
/dev/input/event11: HDA Intel MID Headphone
/dev/input/event12: HDA Intel MID HDMI/DP,pcm=3
/dev/input/event13: USB 2.0 PC Camera: WebCam SCB-0
Select the device event number [0-13]: 2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x45e product 0xe1 version 0x111
Input device name: "Microsoft Microsoft Notebook Receiver v2.0 Mouse"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Event code 6 (REL_HWHEEL)
Event code 8 (REL_WHEEL)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Event: time 1555288252.603793, type 2 (EV_REL), code 8 (REL_WHEEL), value -1
Event: time 1555288252.603793, -------------- SYN_REPORT ------------
Event: time 1555288252.667781, type 2 (EV_REL), code 8 (REL_WHEEL), value -1
Event: time 1555288252.667781, -------------- SYN_REPORT ------------
Event: time 1555288253.275651, type 2 (EV_REL), code 8 (REL_WHEEL), value 1
Event: time 1555288253.275651, -------------- SYN_REPORT ------------
Event: time 1555288253.427623, type 2 (EV_REL), code 8 (REL_WHEEL), value 1
Event: time 1555288253.427623, -------------- SYN_REPORT ------------
5.0:
$ sudo evtest
[sudo] password for alvarezp:
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: AT Translated Set 2 keyboard
/dev/input/event1: Microsoft Microsoft Notebook Receiver v2.0 Consumer
Control
/dev/input/event2: Microsoft Microsoft Notebook Receiver v2.0 Mouse
/dev/input/event3: ETPS/2 Elantech Touchpad
/dev/input/event4: Lid Switch
/dev/input/event5: Power Button
/dev/input/event6: Sleep Button
/dev/input/event7: Power Button
/dev/input/event8: PC Speaker
/dev/input/event9: Video Bus
/dev/input/event10: HDA Intel MID Mic
/dev/input/event11: HDA Intel MID Headphone
/dev/input/event12: HDA Intel MID HDMI/DP,pcm=3
/dev/input/event13: USB 2.0 PC Camera: WebCam SCB-0
Select the device event number [0-13]: 2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x45e product 0xe1 version 0x111
Input device name: "Microsoft Microsoft Notebook Receiver v2.0 Mouse"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Event code 6 (REL_HWHEEL)
Event code 8 (REL_WHEEL)
Event code 11 (?)
Event code 12 (?)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Event: time 1555289094.577076, type 2 (EV_REL), code 11 (?), value -7
Event: time 1555289094.577076, -------------- SYN_REPORT ------------
Event: time 1555289094.841059, type 2 (EV_REL), code 11 (?), value -7
Event: time 1555289094.841059, -------------- SYN_REPORT ------------
Event: time 1555289095.273039, type 2 (EV_REL), code 11 (?), value 7
Event: time 1555289095.273039, -------------- SYN_REPORT ------------
Event: time 1555289095.481020, type 2 (EV_REL), code 11 (?), value 7
Event: time 1555289095.481020, -------------- SYN_REPORT ------------
lsusb -vvv information for this device:
Bus 002 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse
6000 Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x00e1 Wireless Laser Mouse 6000 Receiver
bcdDevice 0.10
iManufacturer 1 Microsoft
iProduct 2 Microsoft Notebook Receiver v2.0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0022
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 274
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Thanks,
Octavio.
-- Package-specific info:
** Version:
Linux version 5.0.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc
version 8.3.0 (Debian 8.3.0-3)) #1 SMP Debian 5.0.2-1~exp1 (2019-03-18)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.0.0-trunk-amd64
root=UUID=515d0602-7bc5-471d-92b8-9b5e655129c2 ro memtest=1
** Tainted: OE (12288)
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[ 28.554859] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 28.556321] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x15/0x0/0x0/0x0/0x0)
[ 28.557759] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 28.559164] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 28.560573] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 28.561948] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 28.635780] input: HDA Intel MID Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 28.637854] input: HDA Intel MID Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.640002] input: HDA Intel MID HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 28.699978] sr 1:0:0:0: [sr0] tag#29 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 28.701439] sr 1:0:0:0: [sr0] tag#29 Sense Key : Illegal Request
[current]
[ 28.702944] sr 1:0:0:0: [sr0] tag#29 Add. Sense: Read of scrambled
sector without authentication
[ 28.704470] sr 1:0:0:0: [sr0] tag#29 CDB: Read(10) 28 00 00 00 04 00
00 00 02 00
[ 28.705860] print_req_error: I/O error, dev sr0, sector 4096 flags 80700
[ 28.803867] sr 1:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 28.805321] sr 1:0:0:0: [sr0] tag#14 Sense Key : Illegal Request
[current]
[ 28.806723] sr 1:0:0:0: [sr0] tag#14 Add. Sense: Read of scrambled
sector without authentication
[ 28.808125] sr 1:0:0:0: [sr0] tag#14 CDB: Read(10) 28 00 00 00 04 00
00 00 02 00
[ 28.809508] print_req_error: I/O error, dev sr0, sector 4096 flags 0
[ 28.810890] Buffer I/O error on dev sr0, logical block 512, async
page read
[ 29.082209] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[ 29.094868] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2
was not initialized!
[ 29.096286] uvcvideo 1-1.1:1.0: Entity type for entity Extension 6
was not initialized!
[ 29.097658] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was
not initialized!
[ 29.099131] input: USB 2.0 PC Camera: WebCam SCB-0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[ 29.100707] usbcore: registered new interface driver uvcvideo
[ 29.102701] USB Video Class driver (1.1.1)
[ 30.371906] Adding 3983356k swap on /dev/sda7. Priority:-2 extents:1
across:3983356k FS
[ 31.367658] intel ips 0000:00:1f.6: i915 driver attached, reenabling
gpu turbo
[ 40.458769] kauditd_printk_skb: 35 callbacks suppressed
[ 40.458771] audit: type=1400 audit(1555288384.292:47):
apparmor="DENIED" operation="open" profile="/usr/bin/freshclam"
name="/etc/ssl/openssl.cnf" pid=702 comm="freshclam" requested_mask="r"
denied_mask="r" fsuid=0 ouid=0
[ 62.437271] ACPI: button: The lid device is not compliant to SW_LID.
[ 62.438281] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.439257] pci_bus 0000:08: Allocating resources
[ 62.439269] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to
[bus 08] add_size 1000
[ 62.439272] pci 0000:00:1e.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align
100000
[ 62.439274] pci 0000:00:1e.0: bridge window [mem
0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[ 62.439282] pci 0000:00:1e.0: BAR 14: assigned [mem
0xf0100000-0xf02fffff]
[ 62.440117] pci 0000:00:1e.0: BAR 15: assigned [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.441058] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 62.441889] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.442713] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.443544] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.444396] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.446021] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.446880] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.447785] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.448681] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.449682] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.450557] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.451443] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.452377] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.453393] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.454306] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.455227] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.456157] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.457134] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.458125] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.459047] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.459966] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 62.461071] pci_bus 0000:02: Allocating resources
[ 62.461092] pci_bus 0000:04: Allocating resources
[ 62.461108] pci_bus 0000:06: Allocating resources
[ 62.461140] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 62.462071] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 62.463008] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf02fffff]
[ 62.463957] pci 0000:00:1e.0: bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[ 69.371156] tun: Universal TUN/TAP device driver, 1.6
[ 72.115088] vboxdrv: loading out-of-tree module taints kernel.
[ 72.115403] vboxdrv: module verification failed: signature and/or
required key missing - tainting kernel
[ 72.125731] vboxdrv: Found 4 processor cores
[ 72.144948] vboxdrv: TSC mode is Invariant, tentative frequency
2394070045 Hz
[ 72.144951] vboxdrv: Successfully loaded version 6.0.4_Debian
(interface 0x00290008)
[ 72.315939] VBoxNetFlt: Successfully started.
[ 72.373779] VBoxNetAdp: Successfully started.
[ 72.463661] VBoxPciLinuxInit
[ 73.145049] audit: type=1400 audit(1555288416.979:48):
apparmor="STATUS" operation="profile_replace" info="same as current
profile, skipping" profile="unconfined" name="/usr/bin/lxc-start"
pid=1220 comm="apparmor_parser"
[ 73.159687] audit: type=1400 audit(1555288416.991:49):
apparmor="STATUS" operation="profile_replace" info="same as current
profile, skipping" profile="unconfined" name="lxc-container-default"
pid=1224 comm="apparmor_parser"
[ 73.159697] audit: type=1400 audit(1555288416.991:50):
apparmor="STATUS" operation="profile_replace" info="same as current
profile, skipping" profile="unconfined"
name="lxc-container-default-cgns" pid=1224 comm="apparmor_parser"
[ 73.159702] audit: type=1400 audit(1555288416.991:51):
apparmor="STATUS" operation="profile_replace" info="same as current
profile, skipping" profile="unconfined"
name="lxc-container-default-with-mounting" pid=1224 comm="apparmor_parser"
[ 73.159706] audit: type=1400 audit(1555288416.991:52):
apparmor="STATUS" operation="profile_replace" info="same as current
profile, skipping" profile="unconfined"
name="lxc-container-default-with-nesting" pid=1224 comm="apparmor_parser"
[ 73.326251] vboxpci: IOMMU not found (not registered)
[ 84.162075] sky2 0000:06:00.0 eth0: enabling interface
[ 85.807039] sky2 0000:06:00.0 eth0: Link is up at 100 Mbps, full
duplex, flow control rx
[ 85.807109] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 100.567756] fuse init (API version 7.28)
[ 652.208142] wlan0: authenticate with d0:54:2d:42:99:38
[ 652.226482] wlan0: send auth to d0:54:2d:42:99:38 (try 1/3)
[ 652.228118] wlan0: authenticated
[ 652.230220] wlan0: associate with d0:54:2d:42:99:38 (try 1/3)
[ 652.235581] wlan0: RX AssocResp from d0:54:2d:42:99:38 (capab=0x431
status=0 aid=1)
[ 652.235755] wlan0: associated
[ 652.333121] ath: EEPROM regdomain: 0x809c
[ 652.333123] ath: EEPROM indicates we should expect a country code
[ 652.333124] ath: doing EEPROM country->regdmn map search
[ 652.333125] ath: country maps to regdmn code: 0x52
[ 652.333126] ath: Country alpha2 being used: CN
[ 652.333127] ath: Regpair used: 0x52
[ 652.333129] ath: regdomain 0x809c dynamically updated by country element
[ 652.333317] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: R530/R730/R540
product_version: Not Applicable
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 08JV.M029.20100621.hkk
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: R530/R730/R540
board_version: Not Applicable
** Loaded modules:
ctr
ccm
fuse
pci_stub
nf_tables
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
tun
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
nf_conntrack_netlink
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nfnetlink
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_hda_codec_hdmi
videobuf2_common
snd_hda_codec_realtek
videodev
media
snd_hda_codec_generic
ledtrig_audio
arc4
ath9k
snd_hda_intel
snd_hda_codec
intel_powerclamp
ath9k_common
kvm_intel
ath9k_hw
snd_hda_core
kvm
irqbypass
i915
snd_hwdep
ath
snd_pcm
drm_kms_helper
intel_cstate
snd_timer
mac80211
intel_uncore
drm
cfg80211
snd
sg
evdev
joydev
pcspkr
serio_raw
soundcore
samsung_laptop
intel_ips
iTCO_wdt
iTCO_vendor_support
rfkill
i2c_algo_bit
battery
ac
button
pcc_cpufreq
acpi_cpufreq
binfmt_misc
coretemp
loop
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
uas
usb_storage
sr_mod
cdrom
sd_mod
hid_generic
usbhid
hid
ahci
libahci
libata
scsi_mod
ehci_pci
ehci_hcd
psmouse
crc32c_intel
usbcore
lpc_ich
sky2
i2c_i801
usb_common
thermal
fan
video
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether e8:11:32:8d:86:49 brd ff:ff:ff:ff:ff:ff
inet 192.168.15.65/24 brd 192.168.15.255 scope global dynamic
noprefixroute eth0
valid_lft 215275sec preferred_lft 215275sec
inet6 fe80::ea11:32ff:fe8d:8649/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP group default qlen 1000
link/ether e0:ca:94:6c:f5:5e brd ff:ff:ff:ff:ff:ff
inet 192.168.15.64/24 brd 192.168.15.255 scope global dynamic
noprefixroute wlan0
valid_lft 215839sec preferred_lft 215839sec
inet6 fe80::75c9:11b4:9023:1b05/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 789779 1916 0 0 0 0 0 257
311036 1688 0 0 0 0 0 0
lo: 270335 975 0 0 0 0 0 0
270335 975 0 0 0 0 0 0
wlan0: 28469 189 0 0 0 0 0 0
11238 46 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
2993 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
2921 incoming packets delivered
2634 requests sent out
60 outgoing packets dropped
7 dropped because of missing route
Icmp:
144 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 144
144 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 144
IcmpMsg:
InType3: 144
OutType3: 144
Tcp:
99 active connection openings
0 passive connection openings
2 failed connection attempts
4 connection resets received
6 connections established
1360 segments received
1344 segments sent out
0 segments retransmitted
0 bad segments received
24 resets sent
Udp:
1039 packets received
144 packets to unknown port received
0 packet receive errors
1161 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 226
UdpLite:
TcpExt:
26 TCP sockets finished time wait in fast timer
35 delayed acks sent
572 packet headers predicted
295 acknowledgments not containing data payload received
91 predicted acknowledgments
TCPBacklogCoalesce: 1
5 connections reset due to unexpected data
4 connections reset due to early user close
TCPRcvCoalesce: 219
TCPAutoCorking: 144
TCPOrigDataSent: 641
TCPDelivered: 731
IpExt:
InMcastPkts: 111
OutMcastPkts: 47
InBcastPkts: 226
OutBcastPkts: 1
InOctets: 1057141
OutOctets: 559071
InMcastOctets: 14545
OutMcastOctets: 8587
InBcastOctets: 40369
OutBcastOctets: 65
InNoECTPkts: 3016
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM
Controller [8086:0044] (rev 02)
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Core
Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if
00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20
[EHCI])
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc906000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series
Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc500000-fc5fffff
Prefetchable memory behind bridge: 00000000fca00000-00000000fcbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fc400000-fc4fffff
Prefetchable memory behind bridge: 00000000fcc00000-00000000fcdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fc600000-fc6fffff
Prefetchable memory behind bridge: 00000000fce00000-00000000fcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20
[EHCI])
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc906400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0100000-f02fffff
Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation HM55 Chipset LPC Interface
Controller [8086:3b09] (rev 05)
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series
Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 25
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1820 [size=32]
Region 5: Memory at fc905000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset
SMBus Controller [8086:3b30] (rev 05)
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc906800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 5
Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc704000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
Kernel modules: intel_ips
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Askey Computer Corp. AR9285 Wireless Network Adapter
(PCI-Express) [144f:7167]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8040 PCI-E Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fc600000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 4000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Core Processor QuickPath Architecture
Generic Non-core Registers [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Core Processor QuickPath Architecture
System Address Decoder [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
Subsystem: Intel Corporation Core Processor QPI Link 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.1 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor QPI
Physical 0 [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.2 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor Reserved [8086:2d12] (rev 02)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor
Reserved [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.3 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor Reserved [8086:2d13] (rev 02)
Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor
Reserved [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 004: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 002 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse
6000 Receiver
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.0.0-trunk-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8),
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.0.0-trunk-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-5.0.0-trunk-amd64 recommends:
ii apparmor 2.13.2-7
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-3
Versions of packages linux-image-5.0.0-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.04~git20171011.af7e95c3+dfsg1-6
ii grub-pc 2.02+dfsg1-10
pn linux-doc-5.0 <none>
Versions of packages linux-image-5.0.0-trunk-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190114-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
ii xen-hypervisor-4.1-amd64 [xen-hypervisor] 4.1.4-4
-- no debconf information
[toc] | [next] | [standalone]
| From | Marcelo Terres <mhterres@gmail.com> |
|---|---|
| Date | 2019-04-20 11:40 +0200 |
| Subject | Bug#927091: |
| Message-ID | <xOUDv-3p6-3@gated-at.bofh.it> |
| In reply to | #63866 |
[Multipart message — attachments visible in raw view] — view raw
Hello. This is happening on Ubuntu 19.04 using kernel 5.0 (package 5.0.0-13.14). Maybe something related with Kernel not with Debian and/or Ubuntu. Regards, Marcelo H. Terres <mhterres@gmail.com> https://www.mundoopensource.com.br https://twitter.com/mhterres https://linkedin.com/in/marceloterres
[toc] | [prev] | [next] | [standalone]
| From | Octavio Alvarez <octalbts@alvarezp.org> |
|---|---|
| Date | 2019-04-24 10:40 +0200 |
| Message-ID | <xQlBD-71S-1@gated-at.bofh.it> |
| In reply to | #63866 |
Hi,
I bisected the kernel to the following commit:
2dc702c991e3774af9d7ce410eef410ca9e2357e is the first bad commit
commit 2dc702c991e3774af9d7ce410eef410ca9e2357e
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Wed Dec 5 10:42:24 2018 +1000
HID: input: use the Resolution Multiplier for high-resolution scrolling
Windows uses a magic number of 120 for a wheel click. High-resolution
scroll wheels are supposed to use a fraction of 120 to signal smaller
scroll steps. This is implemented by the Resolution Multiplier in the
device itself.
If the multiplier is present in the report descriptor, set it to the
logical max and then use the resolution multiplier to calculate the
high-resolution events. This is the recommendation by Microsoft, see
http://msdn.microsoft.com/en-us/windows/hardware/gg487477.aspx
Note that all mice encountered so far have a logical min/max of 0/1, so
it's a binary "yes or no" to high-res scrolling anyway.
To make userspace simpler, always enable the REL_WHEEL_HI_RES bit. Where
the device doesn't support high-resolution scrolling, the value for the
high-res data will simply be a multiple of 120 every time. For
userspace,
if REL_WHEEL_HI_RES is available that is the one to be used.
Potential side-effect: a device with a Resolution Multiplier applying to
other Input items will have those items set to the logical max as well.
This cannot easily be worked around but it is doubtful such devices
exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
:040000 040000 fc4c9b48f3723ef6a8f36b768308bb3c99c9f882
475d4548b75765df6447e43992b07259b181f515 M drivers
:040000 040000 dc356f23227a874721e6688445fc2b90f726e2a7
2190e33e4ad1bcaff0b35dc03194f29fbd9493c6 M include
[toc] | [prev] | [next] | [standalone]
| From | octalbts@alvarezp.org |
|---|---|
| Date | 2019-04-24 10:50 +0200 |
| Message-ID | <xQlLj-75f-3@gated-at.bofh.it> |
| In reply to | #63866 |
It looks like a patch that fixes this is already upstream: https://lkml.org/lkml/2019/4/23/693
[toc] | [prev] | [next] | [standalone]
| From | Octavio Alvarez <octalbts@alvarezp.org> |
|---|---|
| Date | 2019-05-03 19:20 +0200 |
| Message-ID | <xTK0N-1dY-3@gated-at.bofh.it> |
| In reply to | #63866 |
I tested the patch and it works on my system. I suppose this bug should be closed. Thanks! Octavio.
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.kernel
csiph-web