Groups > linux.debian.kernel > #60559 > unrolled thread

Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64

Started by	Marc <marc@gallifrey-blr.fr>
First post	2018-03-25 19:40 +0200
Last post	2018-03-25 19:40 +0200
Articles	1 — 1 participant

Back to article view | Back to linux.debian.kernel

  Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64 Marc <marc@gallifrey-blr.fr> - 2018-03-25 19:40 +0200

#60559 — Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64

From	Marc <marc@gallifrey-blr.fr>
Date	2018-03-25 19:40 +0200
Subject	Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64
Message-ID	<vxhMC-6Xy-5@gated-at.bofh.it>

Package: src:linux
Version: 4.14.17-1
Severity: normal

Dear Maintainer,

When I boot my computer, I have the followed warning :

mars 25 18:51:17 Midgard kernel: ACPI Error: [DSSP] Namespace lookup 
failure, AE_NOT_FOUND (20170728/psargs-364)
mars 25 18:51:17 Midgard kernel: ACPI Error: Method parse/execution 
failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170728/psparse-550)
mars 25 18:51:17 Midgard kernel: ACPI Error: [DSSP] Namespace lookup 
failure, AE_NOT_FOUND (20170728/psargs-364)
mars 25 18:51:17 Midgard kernel: ACPI Error: Method parse/execution 
failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170728/psparse-550)
mars 25 18:51:17 Midgard kernel: ACPI Error: [DSSP] Namespace lookup 
failure, AE_NOT_FOUND (20170728/psargs-364)
mars 25 18:51:17 Midgard kernel: ACPI Error: Method parse/execution 
failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170728/psparse-550)
mars 25 18:51:17 Midgard kernel: ACPI Error: [DSSP] Namespace lookup 
failure, AE_NOT_FOUND (20170728/psargs-364)
mars 25 18:51:17 Midgard kernel: ACPI Error: Method parse/execution 
failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170728/psparse-550)

mars 25 18:51:18 Midgard kernel: usbhid 3-6.3:1.1: couldn't find an 
input interrupt endpoint

My computer seem work find, but this message are new.

Regards

-- Package-specific info:
** Version:
Linux version 4.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc 
version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.14.17-1 (2018-02-14)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 
root=UUID=adf75a18-c4e0-4908-9b83-7cde3e9db64d ro ipv6.disable=1 
ipv6.disable=1 quiet

** Tainted: PO (4097)
  * Proprietary module has been loaded.
  * Out-of-tree module has been loaded.

** Kernel log:
[    2.899560] usb 3-12: Product: USB Storage
[    2.899561] usb 3-12: Manufacturer: Generic
[    2.911896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.919499] snd_ctxfi 0000:09:00.0: chip 20K2 model SB0880 
(1102:0042) is found
[    2.919509] snd_ctxfi 0000:09:00.0: enabling device (0000 -> 0002)
[    2.924928] ACPI Warning: SystemIO range 
0x0000000000001828-0x000000000000182F conflicts with OpRegion 
0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[    2.924933] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[    2.924935] ACPI Warning: SystemIO range 
0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    2.924937] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[    2.924938] ACPI Warning: SystemIO range 
0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 
0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    2.924940] ACPI Warning: SystemIO range 
0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    2.924943] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[    2.924943] ACPI Warning: SystemIO range 
0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 
0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[    2.924946] ACPI Warning: SystemIO range 
0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[    2.924948] ACPI: If an ACPI driver is available for this device, you 
should use it instead of the native driver
[    2.924949] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.951618] Adding 8388604k swap on /dev/sdb2.  Priority:-2 extents:1 
across:8388604k FS
[    2.976024] usb 3-6.3: new low-speed USB device number 9 using xhci_hcd
[    3.081757] usb 3-6.3: New USB device found, idVendor=10d5, 
idProduct=000d
[    3.081758] usb 3-6.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    3.081759] usb 3-6.3: Product: HA2-A3
[    3.081760] usb 3-6.3: Manufacturer: No brand
[    3.081761] usb 3-6.3: SerialNumber: 0\xc2\x92
[    3.086951] input: No brand HA2-A3 as 
/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/0003:10D5:000D.0004/input/input5
[    3.144136] hid-generic 0003:10D5:000D.0004: input,hidraw3: USB HID 
v1.10 Keyboard [No brand HA2-A3] on usb-0000:00:14.0-6.3/input0
[    3.144835] usbhid 3-6.3:1.1: couldn't find an input interrupt endpoint
[    3.235424] snd_ctxfi 0000:09:00.0: Use xfi-native timer
[    3.273222] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.273393] EFI Variables Facility v1.08 2004-May-17
[    3.276773] input: Microsoft X-Box 360 pad as 
/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input7
[    3.276873] usbcore: registered new interface driver xpad
[    3.277062] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 
655360 ms ovfl timer
[    3.277063] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.277063] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.277063] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.277064] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.278719] pstore: using zlib compression
[    3.278726] pstore: Registered efi as persistent store backend
[    3.279379] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.279384] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio 
client
[    3.315251] usb 3-8: Loading firmware file isl3886usb
[    3.315314] usbcore: registered new interface driver p54usb
[    3.318372] usb 3-8: firmware: direct-loading firmware isl3886usb
[    3.318376] ieee80211 phy0: p54 detected a LM86 firmware
[    3.318377] p54: rx_mtu reduced from 3240 to 2392
[    3.318378] ieee80211 phy0: FW rev 2.13.1.0 - Softmac protocol 5.5
[    3.318379] ieee80211 phy0: cryptographic accelerator WEP:YES, 
TKIP:YES, CCMP:YES
[    3.420839] iTCO_vendor_support: vendor-support=0
[    3.421098] asus_wmi: ASUS WMI generic driver loaded
[    3.421604] usb-storage 3-12:1.0: USB Mass Storage device detected
[    3.421778] usb-storage 3-12:1.0: Quirks match for vid 05e3 pid 0723: 
8000
[    3.422301] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.422337] iTCO_wdt: Found a 9 Series TCO device (Version=2, 
TCOBASE=0x1860)
[    3.422391] asus_wmi: Initialization: 0x0
[    3.422413] asus_wmi: BIOS WMI version: 0.9
[    3.422446] asus_wmi: SFUN value: 0x0
[    3.422723] scsi host8: usb-storage 3-12:1.0
[    3.422742] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.422774] input: Eee PC WMI hotkeys as 
/devices/platform/eeepc-wmi/input/input8
[    3.422778] usbcore: registered new interface driver usb-storage
[    3.422836] asus_wmi: Number of fans: 1
[    3.423709] usbcore: registered new interface driver uas
[    3.569738] EXT4-fs (sdb3): mounting ext3 file system using the ext4 
subsystem
[    3.592077] EXT4-fs (sdb3): mounted filesystem with ordered data 
mode. Opts: (null)
[    3.706705] intel_rapl: Found RAPL domain package
[    3.706706] intel_rapl: Found RAPL domain core
[    3.706707] intel_rapl: Found RAPL domain dram
[    3.793332] EXT4-fs (sdb4): mounted filesystem with ordered data 
mode. Opts: (null)
[    3.838493] audit: type=1400 audit(1521996678.687:2): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-xpdfimport" pid=736 comm="apparmor_parser"
[    3.838504] audit: type=1400 audit(1521996678.687:3): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-senddoc" pid=734 comm="apparmor_parser"
[    3.839554] audit: type=1400 audit(1521996678.687:4): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-oopslash" pid=733 comm="apparmor_parser"
[    3.839770] audit: type=1400 audit(1521996678.687:5): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/bin/man" pid=731 comm="apparmor_parser"
[    3.839772] audit: type=1400 audit(1521996678.687:6): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="man_filter" pid=731 comm="apparmor_parser"
[    3.839773] audit: type=1400 audit(1521996678.687:7): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="man_groff" pid=731 comm="apparmor_parser"
[    3.840901] audit: type=1400 audit(1521996678.691:8): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/bin/freshclam" pid=729 comm="apparmor_parser"
[    3.841017] audit: type=1400 audit(1521996678.691:9): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/sbin/mysqld-akonadi" pid=745 comm="apparmor_parser"
[    3.841019] audit: type=1400 audit(1521996678.691:10): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=745 
comm="apparmor_parser"
[    3.924072] random: crng init done
[    4.036570] input: HDA NVidia HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[    4.036600] input: HDA NVidia HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[    4.036634] input: HDA NVidia HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[    4.036668] input: HDA NVidia HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    4.445330] scsi 8:0:0:0: Direct-Access     Generic  STORAGE DEVICE   
9451 PQ: 0 ANSI: 0
[    4.445611] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    4.447614] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    4.866038] resource sanity check: requesting [mem 
0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 
0x000d0000-0x000d3fff window]
[    4.866150] caller _nv001170rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
[    5.146696] nvidia-modeset: Allocated GPU:0 
(GPU-4a9b320e-76d7-c723-5b76-2a0e92b61265) @ PCI:0000:01:00.0
[    5.164079] ieee80211 phy0: hwaddr 00:0c:41:fc:11:b2, MAC:isl3886 
RF:Frisbee
[    5.168262] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.168482] usb 3-8: is registered as 'phy0'
[    5.169815] p54usb 3-8:1.0 wlx000c41fc11b2: renamed from wlan0
[    7.322083] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow 
Control: Rx/Tx
[    7.432823] vboxdrv: Found 8 processor cores
[    7.452161] vboxdrv: TSC mode is Invariant, tentative frequency 
4000023207 Hz
[    7.452162] vboxdrv: Successfully loaded version 5.2.8_Debian 
(interface 0x00290001)
[    7.455542] VBoxNetFlt: Successfully started.
[    7.458975] VBoxNetAdp: Successfully started.
[    7.462250] VBoxPciLinuxInit
[    7.463182] vboxpci: IOMMU not found (not registered)

** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 0603
board_vendor: ASUSTeK COMPUTER INC.
board_name: Z97-PRO
board_version: Rev 1.xx

** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
arc4
binfmt_misc
intel_rapl
snd_hda_codec_hdmi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
uas
eeepc_wmi
iTCO_wdt
usb_storage
asus_wmi
iTCO_vendor_support
kvm_intel
sparse_keymap
mxm_wmi
wmi_bmof
p54usb
kvm
p54common
irqbypass
crct10dif_pclmul
crc32_pclmul
mac80211
ghash_clmulni_intel
intel_cstate
nls_ascii
nls_cp437
cfg80211
intel_uncore
snd_hda_intel
efi_pstore
xpad
vfat
snd_hda_codec
crc_ccitt
fat
rfkill
ff_memless
pcspkr
efivars
intel_rapl_perf
snd_hda_core
snd_ctxfi
snd_hwdep
lpc_ich
mei_me
mfd_core
mei
shpchp
evdev
joydev
snd_soc_rt5640
snd_soc_rl6231
snd_soc_core
snd_compress
snd_pcm
snd_timer
snd
wmi
soundcore
video
acpi_pad
button
nvidia_drm(PO)
drm_kms_helper
drm
nvidia_modeset(PO)
nvidia(PO)
ipmi_devintf
ipmi_msghandler
sg
loop
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
crc32c_intel
aesni_intel
ahci
libahci
aes_x86_64
crypto_simd
xhci_pci
ehci_pci
libata
cryptd
glue_helper
xhci_hcd
ehci_hcd
i2c_i801
scsi_mod
e1000e
ptp
usbcore
pps_core
usb_common
fan
thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor 
DRAM Controller [8086:0c00] (rev 06)
     Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM 
Controller [1043:8534]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
     Latency: 0
     Capabilities: <access denied>
     Kernel driver in use: hsw_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen 
Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 
00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 16
     Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
     I/O behind bridge: 0000e000-0000efff
     Memory behind bridge: de000000-df0fffff
     Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:14.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family 
USB xHCI Controller [8086:8cb1] (prog-if 30 [XHCI])
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB xHCI 
Controller [1043:8534]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 31
     Region 0: Memory at df420000 (64-bit, non-prefetchable) [size=64K]
     Capabilities: <access denied>
     Kernel driver in use: xhci_hcd
     Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 9 Series 
Chipset Family ME Interface #1 [8086:8cba]
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family ME 
Interface [1043:8534]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 50
     Region 0: Memory at df436000 (64-bit, non-prefetchable) [size=16]
     Capabilities: <access denied>
     Kernel driver in use: mei_me
     Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet 
Connection (2) I218-V [8086:15a1]
     Subsystem: ASUSTeK Computer Inc. Ethernet Connection (2) I218-V 
[1043:85c4]
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 30
     Region 0: Memory at df400000 (32-bit, non-prefetchable) [size=128K]
     Region 1: Memory at df434000 (32-bit, non-prefetchable) [size=4K]
     Region 2: I/O ports at f040 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: e1000e
     Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family 
USB EHCI Controller #2 [8086:8cad] (prog-if 20 [EHCI])
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI 
Controller [1043:8534]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 16
     Region 0: Memory at df433000 (32-bit, non-prefetchable) [size=1K]
     Capabilities: <access denied>
     Kernel driver in use: ehci-pci
     Kernel modules: ehci_pci

00:1c.0 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 1 [8086:8c90] (rev d0) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 16
     Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 4 [8086:8c96] (rev d0) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin D routed to IRQ 19
     Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
     I/O behind bridge: 0000d000-0000dfff
     Memory behind bridge: df300000-df3fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 5 [8086:8c98] (rev d0) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 128 bytes
     Interrupt: pin A routed to IRQ 16
     Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
     Memory behind bridge: dc000000-dd2fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 6 [8086:8c9a] (rev d0) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin B routed to IRQ 17
     Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
     Memory behind bridge: df200000-df2fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:1c.6 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 7 [8086:8c9c] (rev d0) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin C routed to IRQ 18
     Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
     Memory behind bridge: df100000-df1fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family 
USB EHCI Controller #1 [8086:8ca6] (prog-if 20 [EHCI])
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI 
Controller [1043:8534]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 23
     Region 0: Memory at df432000 (32-bit, non-prefetchable) [size=1K]
     Capabilities: <access denied>
     Kernel driver in use: ehci-pci
     Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation 9 Series Chipset Family Z97 
LPC Controller [8086:8cc4]
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family Z97 LPC 
Controller [1043:8534]
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Capabilities: <access denied>
     Kernel driver in use: lpc_ich
     Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 9 Series Chipset 
Family SATA Controller [AHCI Mode] [8086:8c82] (prog-if 01 [AHCI 1.0])
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SATA 
Controller [AHCI Mode] [1043:8534]
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin B routed to IRQ 32
     Region 0: I/O ports at f090 [size=8]
     Region 1: I/O ports at f080 [size=4]
     Region 2: I/O ports at f070 [size=8]
     Region 3: I/O ports at f060 [size=4]
     Region 4: I/O ports at f020 [size=32]
     Region 5: Memory at df431000 (32-bit, non-prefetchable) [size=2K]
     Capabilities: <access denied>
     Kernel driver in use: ahci
     Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 9 Series Chipset Family SMBus 
Controller [8086:8ca2]
     Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SMBus 
Controller [1043:8534]
     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Interrupt: pin C routed to IRQ 18
     Region 0: Memory at df430000 (64-bit, non-prefetchable) [size=256]
     Region 4: I/O ports at f000 [size=32]
     Kernel driver in use: i801_smbus
     Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM200 
[GeForce GTX 980 Ti] [10de:17c8] (rev a1) (prog-if 00 [VGA controller])
     Subsystem: Gigabyte Technology Co., Ltd GM200 [GeForce GTX 980 Ti] 
[1458:36cb]
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 51
     Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
     Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
     Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
     Region 5: I/O ports at e000 [size=128]
     [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
     Capabilities: <access denied>
     Kernel driver in use: nvidia
     Kernel modules: nvidia

01:00.1 Audio device [0403]: NVIDIA Corporation GM200 High Definition 
Audio [10de:0fb0] (rev a1)
     Subsystem: Gigabyte Technology Co., Ltd GM200 High Definition Audio 
[1458:36cb]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin B routed to IRQ 17
     Region 0: Memory at df080000 (32-bit, non-prefetchable) [size=16K]
     Capabilities: <access denied>
     Kernel driver in use: snd_hda_intel
     Kernel modules: snd_hda_intel

03:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1184] 
(prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 25
     Bus: primary=03, secondary=04, subordinate=08, sec-latency=0
     I/O behind bridge: 0000d000-0000dfff
     Memory behind bridge: df300000-df3fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

04:01.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1184] 
(prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 26
     Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

04:03.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1184] 
(prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 27
     Bus: primary=04, secondary=06, subordinate=06, sec-latency=0
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

04:05.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1184] 
(prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 28
     Bus: primary=04, secondary=07, subordinate=07, sec-latency=0
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

04:07.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1184] 
(prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 29
     Bus: primary=04, secondary=08, subordinate=08, sec-latency=0
     I/O behind bridge: 0000d000-0000dfff
     Memory behind bridge: df300000-df3fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport
     Kernel modules: shpchp

08:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial 
ATA Controller [1b21:0612] (rev 02) (prog-if 01 [AHCI 1.0])
     Subsystem: ASUSTeK Computer Inc. ASM1062 Serial ATA Controller 
[1043:858d]
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 41
     Region 0: I/O ports at d050 [size=8]
     Region 1: I/O ports at d040 [size=4]
     Region 2: I/O ports at d030 [size=8]
     Region 3: I/O ports at d020 [size=4]
     Region 4: I/O ports at d000 [size=32]
     Region 5: Memory at df300000 (32-bit, non-prefetchable) [size=512]
     Capabilities: <access denied>
     Kernel driver in use: ahci
     Kernel modules: ahci

09:00.0 Audio device [0403]: Creative Labs EMU20k2 [Sound Blaster X-Fi 
Titanium Series] [1102:000b] (rev 03)
     Subsystem: Creative Labs EMU20k2 [Sound Blaster X-Fi Titanium 
Series] [1102:0042]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 16
     Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=64K]
     Region 2: Memory at dd000000 (64-bit, non-prefetchable) [size=2M]
     Region 4: Memory at dc000000 (64-bit, non-prefetchable) [size=16M]
     Capabilities: <access denied>
     Kernel driver in use: snd_ctxfi
     Kernel modules: snd_ctxfi

0a:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host 
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 17
     Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=8K]
     Capabilities: <access denied>
     Kernel driver in use: xhci_hcd
     Kernel modules: xhci_pci

0b:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 
Host Controller [1b21:1142] (prog-if 30 [XHCI])
     Subsystem: ASUSTeK Computer Inc. ASM1042A USB 3.0 Host Controller 
[1043:85fd]
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 64 bytes
     Interrupt: pin A routed to IRQ 18
     Region 0: Memory at df100000 (64-bit, non-prefetchable) [size=32K]
     Capabilities: <access denied>
     Kernel driver in use: xhci_hcd
     Kernel modules: xhci_pci


** USB devices:
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 006: ID 5041:2234 Linksys (?) WUSB54G v1 802.11g Adapter 
[Intersil ISL3886]
Bus 003 Device 004: ID 04b8:011b Seiko Epson Corp. GT-9300UF [Perfection 
2400 PHOTO]
Bus 003 Device 009: ID 10d5:000d Uni Class Technology Co., Ltd
Bus 003 Device 007: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 003 Device 005: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 002: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 003 Device 008: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS 
Flash Card Reader
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
   APT prefers testing
   APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.14.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), 
LANGUAGE=fr (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.14.0-3-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    25-1
ii  linux-base                              4.5

Versions of packages linux-image-4.14.0-3-amd64 recommends:
ii  apparmor             2.12-4
ii  firmware-linux-free  3.4
ii  irqbalance           1.3.0-0.1

Versions of packages linux-image-4.14.0-3-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.03+dfsg1-2
ii  grub-efi-amd64          2.02+dfsg1-3
pn  linux-doc-4.14          <none>

Versions of packages linux-image-4.14.0-3-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20170823-1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20170823-1
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

[toc] | [standalone]

csiph-web

Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64

Contents

#60559 — Bug#894035: linux-image-4.14.0-3-amd64: ACPI error with kernel 4.14.0-3-amd64