Groups > linux.debian.kernel > #57098 > unrolled thread

Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend

Started by	Fede <beffa@ieee.org>
First post	2017-02-25 20:40 +0100
Last post	2017-05-31 12:20 +0200
Articles	4 — 3 participants

Back to article view | Back to linux.debian.kernel

  Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend Fede <beffa@ieee.org> - 2017-02-25 20:40 +0100
    Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend Martin Michlmayr <tbm@cyrius.com> - 2017-05-30 11:50 +0200
      Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend Federico Beffa <beffa@ieee.org> - 2017-05-30 18:40 +0200
        Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend Martin Michlmayr <tbm@cyrius.com> - 2017-05-31 12:20 +0200

#57098 — Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend

From	Fede <beffa@ieee.org>
Date	2017-02-25 20:40 +0100
Subject	Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend
Message-ID	<teQmd-42X-1@gated-at.bofh.it>

Package: src:linux
Version: 4.9.6-3
Severity: important

Dear Maintainer,

I have a Dell XPS 15 9550.  I first installed Debian Stretch mid January and
after installation I could suspend and resume my laptop by closing the lid.
Since the recent kernel update the laptop doesn't resume from suspend.  Instead
it just reboots.

Fede



-- Package-specific info:
** Version:
Linux version 4.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170124 (Debian 6.3.0-5) ) #1 SMP Debian 4.9.6-3 (2017-01-28)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=bdc80303-1925-45c8-8799-9cb8631fac70 ro quiet

** Not tainted

** Kernel log:
[    2.636763] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    2.636765] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[    2.637213] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[    2.702259] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[    2.702486] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7
[    2.725022] random: crng init done
[    2.781523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.781524] Bluetooth: BNEP filters: protocol multicast
[    2.781526] Bluetooth: BNEP socket layer initialized
[    3.332255] input: DLL06E4:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-17/i2c-DLL06E4:01/0018:06CB:7A13.0001/input/input10
[    3.332633] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL06E4:01 06CB:7A13] on i2c-DLL06E4:01
[    3.413891] clocksource: Switched to clocksource tsc
[    3.754070] vga_switcheroo: enabled
[    3.754173] [TTM] Zone  kernel: Available graphics memory: 8128558 kiB
[    3.754173] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.754173] [TTM] Initializing pool allocator
[    3.754176] [TTM] Initializing DMA pool allocator
[    3.754207] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    3.754208] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.754210] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    3.754213] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.754214] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    3.786167] [drm] RC6 on
[    4.018490] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    4.018494] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    4.020645] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.021611] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    4.021674] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    4.021699] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input13
[    4.021754] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    4.021786] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.024807] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.024824] fbcon: inteldrmfb (fb0) is primary device
[    4.024935] Console: switching to colour frame buffer device 240x67
[    4.024939] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.052318] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.052319] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.052320] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.052321] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.052321] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.052323] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    4.052324] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    4.052324] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.057368] intel_rapl: Found RAPL domain package
[    4.057370] intel_rapl: Found RAPL domain core
[    4.057371] intel_rapl: Found RAPL domain uncore
[    4.057373] intel_rapl: Found RAPL domain dram
[    4.071077] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.071133] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.071182] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.071217] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.833806] ath10k_pci 0000:02:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    4.913458] ath: EEPROM regdomain: 0x6c
[    4.913459] ath: EEPROM indicates we should expect a direct regpair map
[    4.913460] ath: Country alpha2 being used: 00
[    4.913461] ath: Regpair used: 0x6c
[    4.919302] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.939315] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.250328] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    7.499192] Bluetooth: RFCOMM TTY layer initialized
[    7.499196] Bluetooth: RFCOMM socket layer initialized
[    7.499199] Bluetooth: RFCOMM ver 1.11
[    9.648735] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    9.742687] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   14.057941] nouveau 0000:01:00.0: DRM: evicting buffers...
[   14.057943] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   14.057960] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   14.060695] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   14.552276] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   14.696595] wlp2s0: authenticate with a0:ec:f9:ac:7a:d8
[   14.749470] wlp2s0: send auth to a0:ec:f9:ac:7a:d8 (try 1/3)
[   14.752661] wlp2s0: authenticated
[   14.753980] wlp2s0: associate with a0:ec:f9:ac:7a:d8 (try 1/3)
[   14.757728] wlp2s0: RX AssocResp from a0:ec:f9:ac:7a:d8 (capab=0x411 status=0 aid=3)
[   14.761710] wlp2s0: associated
[   14.761754] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   14.768674] ath: EEPROM regdomain: 0x8114
[   14.768677] ath: EEPROM indicates we should expect a country code
[   14.768680] ath: doing EEPROM country->regdmn map search
[   14.768681] ath: country maps to regdmn code: 0x37
[   14.768682] ath: Country alpha2 being used: DE
[   14.768683] ath: Regpair used: 0x37
[   14.768685] ath: regdomain 0x8114 dynamically updated by country IE
[   15.148952] systemd[1]: apt-daily.timer: Adding 9h 27min 58.803279s random time.
[   15.302362] systemd[1]: apt-daily.timer: Adding 5h 52min 34.753182s random time.
[   15.674364] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   15.810522] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1b40822c)
[   15.830840] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   16.493458] fuse init (API version 7.26)
[   21.994099] nouveau 0000:01:00.0: DRM: evicting buffers...
[   22.026350] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   22.026369] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   22.029753] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[  302.777627] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[  302.951885] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1b40822c)
[  302.972597] nouveau 0000:01:00.0: DRM: resuming client object trees...
[  308.605528] nouveau 0000:01:00.0: DRM: evicting buffers...
[  308.605532] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[  308.605559] nouveau 0000:01:00.0: DRM: suspending client object trees...
[  308.608616] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

** Model information
sys_vendor: Dell Inc.
product_name: XPS 15 9550
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: 1.2.19
board_vendor: Dell Inc.
board_name: 0N7TVV
board_version: A01

** Loaded modules:
fuse
ctr
ccm
rfcomm
arc4
snd_hda_codec_hdmi
dell_led
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_hda_codec_realtek
snd_hda_codec_generic
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
intel_cstate
hid_multitouch
cmac
bnep
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
i2c_designware_platform
dell_wmi
efi_pstore
media
i2c_designware_core
sparse_keymap
dell_laptop
dell_smbios
dcdbas
intel_uncore
intel_rapl_perf
evdev
serio_raw
efivars
pcspkr
iTCO_wdt
iTCO_vendor_support
nls_ascii
nls_cp437
vfat
fat
snd_hda_intel
ath10k_pci
snd_hda_codec
ath10k_core
snd_hda_core
snd_hwdep
snd_pcm
ath
snd_timer
snd
nouveau
mac80211
soundcore
cfg80211
mxm_wmi
rtsx_pci_ms
ttm
memstick
btusb
idma64
btrtl
virt_dma
i915
drm_kms_helper
drm
mei_me
mei
processor_thermal_device
shpchp
i2c_algo_bit
intel_lpss_pci
intel_soc_dts_iosf
hci_uart
battery
btbcm
btqca
btintel
bluetooth
int3403_thermal
int3400_thermal
intel_lpss_acpi
wmi
intel_lpss
acpi_thermal_rel
int3402_thermal
dell_smo8800
int340x_thermal_zone
video
rfkill
acpi_pad
acpi_als
button
kfifo_buf
tpm_tis
industrialio
tpm_tis_core
ac
tpm
parport_pc
auth_rpcgss
ppdev
lp
sunrpc
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
rtsx_pci_sdmmc
mmc_core
crc32c_intel
aesni_intel
ahci
aes_x86_64
glue_helper
libahci
lrw
gf128mul
ablk_helper
xhci_pci
cryptd
libata
xhci_hcd
psmouse
usbcore
i2c_i801
scsi_mod
nvme
i2c_smbus
nvme_core
rtsx_pci
mfd_core
usb_common
fan
thermal
i2c_hid
hid
fjes

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1910] (rev 07)
	Subsystem: Dell Skylake Host Bridge/DRAM Registers [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: skl_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 122
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: dc000000-dd0fffff
	Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Dell HD Graphics 530 [1028:06e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 137
	Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at 70000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
	Subsystem: Dell Skylake Processor Thermal Subsystem [1028:06e4]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dd120000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
	Subsystem: Dell Sunrise Point-H USB 3.0 xHCI Controller [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 125
	Region 0: Memory at dd110000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
	Subsystem: Dell Sunrise Point-H Thermal subsystem [1028:06e4]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at dd138000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 [8086:a160] (rev 31)
	Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dd137000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 [8086:a161] (rev 31)
	Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at dd136000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
	Subsystem: Dell Sunrise Point-H CSME HECI [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 136
	Region 0: Memory at dd135000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Sunrise Point-H SATA Controller [AHCI mode] [1028:06e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 126
	Region 0: Memory at dd130000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at dd134000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at dd133000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: dd200000-dd3fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: dd400000-dddfffff
	Prefetchable memory behind bridge: 00000000c2100000-00000000c2afffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: dde00000-ddefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: c4000000-da0fffff
	Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31)
	Subsystem: Dell Sunrise Point-H LPC Controller [1028:06e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
	Subsystem: Dell Sunrise Point-H PMC [1028:06e4]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at dd12c000 (32-bit, non-prefetchable) [disabled] [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31) (prog-if 80)
	Subsystem: Dell Sunrise Point-H HD Audio [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 138
	Region 0: Memory at dd128000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at dd100000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
	Subsystem: Dell Sunrise Point-H SMBus [1028:06e4]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dd132000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 960M] [10de:139b] (rev a2)
	Subsystem: Dell GM107M [GeForce GTX 960M] [1028:06e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 135
	Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at e000 [size=128]
	Expansion ROM at dd000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nouveau

02:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
	Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network Adapter [1a56:1535]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 134
	Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=2M]
	Capabilities: <access denied>
	Kernel driver in use: ath10k_pci
	Kernel modules: ath10k_pci

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
	Subsystem: Dell RTS525A PCI Express Card Reader [1028:06e4]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	Region 1: Memory at dd400000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci

04:00.0 Non-Volatile memory controller [0108]: Device [1c5c:1284] (prog-if 02 [NVM Express])
	Subsystem: Device [1c5c:0000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	NUMA node: 0
	Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: nvme
	Kernel modules: nvme


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0cf3:e300 Atheros Communications, Inc. 
Bus 001 Device 003: ID 0c45:6713 Microdia 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 9.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.127
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-1-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.2

Versions of packages linux-image-4.9.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-1-amd64 is related to:
pn  firmware-amd-graphics     <none>
ii  firmware-atheros          20161130-2
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

[toc] | [next] | [standalone]

#57859

From	Martin Michlmayr <tbm@cyrius.com>
Date	2017-05-30 11:50 +0200
Message-ID	<tMLWN-5BU-1@gated-at.bofh.it>
In reply to	#57098

* Fede <beffa@ieee.org> [2017-02-25 20:31]:
> I have a Dell XPS 15 9550.  I first installed Debian Stretch mid
> January and after installation I could suspend and resume my laptop
> by closing the lid.  Since the recent kernel update the laptop
> doesn't resume from suspend.  Instead it just reboots.

Do you still see this problem?

I saw something similar yesterday with linux-image-4.9.0-3-amd64
(4.9.25-1) on a Dell XPS 13 9350.  Instant reboot after opening the
lid.  I booted into Debian, suspended, opened the lid and got a reboot
again.  This happened about 2-3 times and then suspend starting
working and is still working so far.

So while I was able to trigger it reliable 2-3 times, it's working
again (and I never had any problems during the last 2 months).

-- 
Martin Michlmayr
http://www.cyrius.com/

[toc] | [prev] | [next] | [standalone]

#57860

From	Federico Beffa <beffa@ieee.org>
Date	2017-05-30 18:40 +0200
Message-ID	<tMSlz-1h4-9@gated-at.bofh.it>
In reply to	#57859

On Tue, May 30, 2017 at 11:44 AM, Martin Michlmayr <tbm@cyrius.com> wrote:
> * Fede <beffa@ieee.org> [2017-02-25 20:31]:
>> I have a Dell XPS 15 9550.  I first installed Debian Stretch mid
>> January and after installation I could suspend and resume my laptop
>> by closing the lid.  Since the recent kernel update the laptop
>> doesn't resume from suspend.  Instead it just reboots.
>
> Do you still see this problem?
>
> I saw something similar yesterday with linux-image-4.9.0-3-amd64
> (4.9.25-1) on a Dell XPS 13 9350.  Instant reboot after opening the
> lid.  I booted into Debian, suspended, opened the lid and got a reboot
> again.  This happened about 2-3 times and then suspend starting
> working and is still working so far.
>
> So while I was able to trigger it reliable 2-3 times, it's working
> again (and I never had any problems during the last 2 months).

With kernel versions 4.9.0-2-amd64 and 4.9.0-3-amd64 the laptop (not
connected to a docking station) resumes as expected. Unfortunately I
still have many problems, but all related to the use of a docking
station, a Dell WD15.

With kernel 4.9.0-2-amd64 hot-plugging or disconnecting the docking
station most of the time results in a kernel freeze. Suspend and
resume kind of works, but only if the monitor input is always
listening for the port where the docking station is connected. If the
monitor switches port (automatic signal lookup) I end up with a blank
screen and need to use the power button.

With kernel 4.9.0-3-amd64 the use of the docking station is totally
impractical as half of the times I try to suspend and resume I get a
blank screen and have to use the power button. In fact I reverted to
4.9.0-2-amd64 for the time being.

To try to find out if the problems are caused by the kernel or by the
docking station firmware (latest available version with BIOS 1.2.25),
I tested an Ubuntu 17.04 live image which has a newer kernel of the
line 4.10. With it everything works as expected: suspend, resume,
hot-plugging and disconnecting (both while active as well as while in
suspend mode) and I can switch monitor input without fear. My
conclusion is that the problems are caused by the current kernel used
in Debian testing.

Regards,
Fede

[toc] | [prev] | [next] | [standalone]

#57862

From	Martin Michlmayr <tbm@cyrius.com>
Date	2017-05-31 12:20 +0200
Message-ID	<tN8To-3pQ-1@gated-at.bofh.it>
In reply to	#57860

* Federico Beffa <beffa@ieee.org> [2017-05-30 18:28]:
> With kernel versions 4.9.0-2-amd64 and 4.9.0-3-amd64 the laptop (not
> connected to a docking station) resumes as expected. Unfortunately I
> still have many problems, but all related to the use of a docking
> station, a Dell WD15.

I don't use a docking station.  I use a USB C to HDMI dongle but don't
think it's related to this.

Anyway, I haven't been able to reproduce the issue since it happened a
few days ago.

But I wanted to commnent on this bug report since we have (somewhat)
similar laptops.

-- 
Martin Michlmayr
http://www.cyrius.com/

[toc] | [prev] | [standalone]

csiph-web

Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend

Contents

#57098 — Bug#856164: linux-image-4.9.0-1-amd64: system doesn't resume from suspend

#57859

#57860

#57862