Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #90570 > unrolled thread
| Started by | Martin Herren <sputnik@on-the-web.ch> |
|---|---|
| First post | 2025-12-25 16:40 +0100 |
| Last post | 2025-12-26 20:50 +0100 |
| Articles | 5 — 3 participants |
Back to article view | Back to linux.debian.kernel
Bug#1123985: linux-image-6.17.12+deb14-amd64: LUKS passphrase never matches on 6.17.12 and 6.17.13. Works fine on 6.17.11. Martin Herren <sputnik@on-the-web.ch> - 2025-12-25 16:40 +0100
Bug#1123985: It seems a keymap issue Martin Herren <sputnik@on-the-web.ch> - 2025-12-26 12:10 +0100
Bug#1123985: It seems a keymap issue Salvatore Bonaccorso <carnil@debian.org> - 2025-12-26 18:10 +0100
Bug#1123985: It seems a keymap issue Martin Herren <sputnik@on-the-web.ch> - 2025-12-26 20:10 +0100
Bug#1123985: marked as done (linux-image-6.17.12+deb14-amd64: LUKS passphrase never matches on 6.17.12 and 6.17.13. Works fine on 6.17.11.) "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-12-26 20:50 +0100
| From | Martin Herren <sputnik@on-the-web.ch> |
|---|---|
| Date | 2025-12-25 16:40 +0100 |
| Subject | Bug#1123985: linux-image-6.17.12+deb14-amd64: LUKS passphrase never matches on 6.17.12 and 6.17.13. Works fine on 6.17.11. |
| Message-ID | <M5VBv-5zUl-1@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
Package: src:linux
Version: 6.17.12-1
Severity: important
X-Debbugs-Cc: debian-amd64@lists.debian.org
User: debian-amd64@lists.debian.org
Usertags: amd64
Dear Maintainer,
On my Debian Sid laptop, wit full disk encryption enabled, since upgrading to
kernel 6.17.12 my LUKS passphrase is never accepted so I cannot boot this
kernel.
The same applies to kernel 6.17.13.
6.17.11 works fine.
I use the Swiss french keyboard layout.
Best regards,
Martin
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: Latitude 5500
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.42.0
board_vendor: Dell Inc.
board_name: 0M14W7
board_version: A01
** Configuration for modprobe:
blacklist microcode
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
b
lacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
blacklist hackrf
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options md_mod start_ro=1
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Coffee Lake HOST and DRAM Controller [8086:3e34] (rev 0c)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=f
ast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation WhiskeyLake-U GT2 [UHD Graphics 620] [8086:3ea0] (rev 02) (prog-if 00 [VGA controller])
DeviceName: Onboard - Video
Subsystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 134
IOMMU group: 0
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Si
gnal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 0c)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 2
Region 0: Memory at 91330000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device_pci_legacy
00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model [8086:1911]
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap
+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
IOMMU group: 3
Region 0: Memory at 9134e000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:12.0 Signal processing controller [1180]: Intel Corporation Cannon Point-LP Thermal Controller [8086:9df9] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 4
Region 0: Memory at 9134d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:14.0 USB controller [0c03]: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller [8086:9ded] (rev 30) (prog
-if 30 [XHCI])
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 139
IOMMU group: 5
Region 0: Memory at 91320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory [0500]: Intel Corporation Cannon Point-LP Shared SRAM [8086:9def] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 5
Region 0: Memory at 91342000 (64-bit, non-prefetchable) [disabled] [size=8K]
Region 2: Memory at 9134c
000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:14.3 Network controller [0280]: Intel Corporation Cannon Point-LP CNVi [Wireless-AC] [8086:9df0] (rev 30)
DeviceName: Onboard - Ethernet
Subsystem: Intel Corporation Device [8086:4030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 138
IOMMU group: 6
Region 0: Memory at 9133c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 [8086:9de8] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 7
Region 0: Memory at 7f800000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #1 [8086:9de9] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 7
Region 0: Memory at 7f801000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel dr
iver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Cannon Point-LP MEI Controller #1 [8086:9de0] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
IOMMU group: 8
Region 0: Memory at 91349000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Cannon Point-LP Keyboard and Text (KT) Redirection [8086:9de3] (rev 30) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status:
Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
IOMMU group: 8
Region 0: I/O ports at 30a0 [size=8]
Region 1: Memory at 91348000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:17.0 SATA controller [0106]: Intel Corporation Cannon Point-LP SATA Controller [AHCI Mode] [8086:9dd3] (rev 30) (prog-if 01 [AHCI 1.0])
DeviceName: Onboard - SATA
Subsystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 147
IOMMU group: 9
Region 0: Memory at 91340000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 91347000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at 3090 [size=8]
Region 3: I/O ports at
3080 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at 91346000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:19.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Host Controller [8086:9dc5] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
IOMMU group: 10
Region 0: Memory at 7f802000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1c.0 PCI bridge [0604]: Intel Corporation Cannon Point PCI Express Root Port #8 [8086:9dbf] (rev f0) (prog-if 00 [Normal deco
de])
Subsystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 123
IOMMU group: 11
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 91200000-912fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Cannon Point-LP PCI Express Root Port #13 [8086:9db4] (rev f0) (prog-if 00 [Normal decode])
Subs
ystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
IOMMU group: 12
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 91100000-911fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Cannon Point-LP LPC Controller [8086:9d84] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1
028:08b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 13
00:1f.3 Audio device [0403]: Intel Corporation Cannon Point-LP High Definition Audio Controller [8086:9dc8] (rev 30) (prog-if 80 [HDA compatible with vendor specific extensions])
DeviceName: Onboard - Sound
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 148
IOMMU group: 13
Region 0: Memory at 91338000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at 91000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda
_intel
Kernel modules: snd_soc_avs, snd_sof_pci_intel_cnl, snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Cannon Point-LP SMBus Controller [8086:9da3] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 13
Region 0: Memory at 91344000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller [8086:9da4] (rev 30)
DeviceName: Onboard - Other
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- D
EVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 13
Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (6) I219-LM [8086:15bd] (rev 30)
DeviceName: Onboard - Ethernet
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 137
IOMMU group: 13
Region 0: Memory at 91300000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell Device [1028:08b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 136
IOMMU group: 14
Region 1: Memory at 91200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller S4LV008[Pascal] [144d:a80c] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd SSD 990 PRO [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 15
Region 0: Memory at 91100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Ker
nel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:5532 Realtek Semiconductor Corp. Integrated_Webcam_HD
Bus 001 Device 003: ID 0a5c:5843 Broadcom Corp. BCM58200 ControlVault 3 (FingerPrint sensor + Contacted SmartCard)
Bus 001 Device 004: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
-- System Information:
Debian Release: forky/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.17.11+deb14-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.17.12+deb14-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.150
ii kmod
34.2-2
ii linux-base 4.14
Versions of packages linux-image-6.17.12+deb14-amd64 recommends:
ii apparmor 4.1.0-1+b1
Versions of packages linux-image-6.17.12+deb14-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-3.2
ii firmware-linux-free 20241210-2
ii grub-efi-amd64 2.14~git20250718.0e36779-2
pn linux-doc-6.17 <none>
Versions of packages linux-image-6.17.12+deb14-amd64 is related to:
ii firmware-amd-graphics 20251111-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
ii firmware-intel-graphics 20251111-1
ii firmware-intel-misc 20251111-1
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20251111-1
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
ii firmware-mediatek 20251111-1
ii firmware-misc-nonfree 20251111-1
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
ii firmware-nvidia-graphics 20251111-1
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[toc] | [next] | [standalone]
| From | Martin Herren <sputnik@on-the-web.ch> |
|---|---|
| Date | 2025-12-26 12:10 +0100 |
| Subject | Bug#1123985: It seems a keymap issue |
| Message-ID | <M6dRL-5Mfr-11@gated-at.bofh.it> |
| In reply to | #90570 |
[Multipart message — attachments visible in raw view] — view raw
Hello, After further testing I can boot both 6.17.12 and 6.17.13 kernels by typing the passphrase as on a US keyboard layout. With the 6.17.11 and previous kernels I can type it with my usual Swiss French keyboard layout. Best regards, Martin
[toc] | [prev] | [next] | [standalone]
| From | Salvatore Bonaccorso <carnil@debian.org> |
|---|---|
| Date | 2025-12-26 18:10 +0100 |
| Subject | Bug#1123985: It seems a keymap issue |
| Message-ID | <M6ju9-5Q30-9@gated-at.bofh.it> |
| In reply to | #90575 |
Hi Martin,
On Fri, Dec 26, 2025 at 10:36:53AM +0000, Martin Herren wrote:
> Hello,
>
> After further testing I can boot both 6.17.12 and 6.17.13 kernels by
> typing the passphrase as on a US keyboard layout.
>
> With the 6.17.11 and previous kernels I can type it with my usual
> Swiss French keyboard layout.
This is quite odd, and initially I suspected a change outside of the
kernel. But would you be open to do a bisect experiment? But before
diving into it, might you please as well install 6.18.2-1~exp1 from
experimental and verify if the problem persists? There won't be any
updates in the 6.17.y series.
If the problem persists in 6.18.2 then we might start with the bisect
experiment in the 6.17.y series.
This would involve compiling and testing a couple of kernels, and the
first step would indicate already if we would be still on the right
track.
git clone --single-branch -b linux-6.17.y https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
cd linux-stable
git checkout v6.17.11
cp /boot/config-$(uname -r) .config
yes '' | make localmodconfig
make savedefconfig
mv defconfig arch/x86/configs/my_defconfig
# test 6.17.11 to ensure this is "good"
make my_defconfig
make -j $(nproc) bindeb-pkg
... install the resulting .deb package and confirm it the problem does not exist.
This is actually an intersting step, I would be interested to see
if any surrounding changes did influence that it does not work
anymore with 6.17.11.
# test 6.17.12 to ensure this is "bad"
git checkout v6.17.12
make my_defconfig
make -j $(nproc) bindeb-pkg
... install the resulting .deb package and confirm the problem exists.
Now if and only if that is confirmed, the bisection can start:
git bisect start
git bisect good v6.17.11
git bisect bad v6.17.12
In each bisection step git checks out a state between the oldest
known-bad and the newest known-good commit. In each step test using:
make my_defconfig
make -j $(nproc) bindeb-pkg
... install, try to boot / verify if problem exists
and if the problem is hit run:
git bisect bad
and if the problem doesn't trigger run:
git bisect good
. Please pay attention to always select the just built kernel for
booting, it won't always be the default kernel picked up by grub.
Iterate until git announces to have identified the first bad commit.
Then provide the output of
git bisect log
In the course of the bisection you might have to uninstall previous
kernels again to not exhaust the disk space in /boot. Also in the end
uninstall all self-built kernels again.
Regards,
Salvatore
[toc] | [prev] | [next] | [standalone]
| From | Martin Herren <sputnik@on-the-web.ch> |
|---|---|
| Date | 2025-12-26 20:10 +0100 |
| Subject | Bug#1123985: It seems a keymap issue |
| Message-ID | <M6lmh-5RkZ-7@gated-at.bofh.it> |
| In reply to | #90578 |
[Multipart message — attachments visible in raw view] — view raw
Hi Salvatore, Thanks for your help. It was indeed an issue outside of the kernel package and thanks to your things to try I figured it out. Initially also though about the initramfs-tools package, would have been strange as it hasn't changed for a few months. As you recommended I installed the 6.18 kernel from experimental and noticed the following warning during the install: /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-6.18-amd64 setupcon is missing. Please install the 'console-setup' package. As expected from this the issue was still there, had to use the US layout to enter the passphrase. After (re)installing 'console-setup' and reinstalling the kernel it works fine using my swiss french layout. No idea how I managed to bork my system between the 6.17.11 and 6.17.12 kernels by accidentally uninstalling this package. Now just need to regenerate all initramfs. Thanks for your help again, sorry to have bothered you with a bug report that was just an error on my side. So issue closed. Best regards, Martin Sent with Proton Mail secure email. On Friday, December 26th, 2025 at 5:04 PM, Salvatore Bonaccorso <carnil@debian.org> wrote: > Hi Martin, > > On Fri, Dec 26, 2025 at 10:36:53AM +0000, Martin Herren wrote: > > > Hello, > > > > After further testing I can boot both 6.17.12 and 6.17.13 kernels by > > typing the passphrase as on a US keyboard layout. > > > > With the 6.17.11 and previous kernels I can type it with my usual > > Swiss French keyboard layout. > > > This is quite odd, and initially I suspected a change outside of the > kernel. But would you be open to do a bisect experiment? But before > diving into it, might you please as well install 6.18.2-1~exp1 from > experimental and verify if the problem persists? There won't be any > updates in the 6.17.y series. > > If the problem persists in 6.18.2 then we might start with the bisect > experiment in the 6.17.y series. > > This would involve compiling and testing a couple of kernels, and the > first step would indicate already if we would be still on the right > track. > > git clone --single-branch -b linux-6.17.y https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git > cd linux-stable > git checkout v6.17.11 > cp /boot/config-$(uname -r) .config > yes '' | make localmodconfig > make savedefconfig > mv defconfig arch/x86/configs/my_defconfig > > # test 6.17.11 to ensure this is "good" > make my_defconfig > make -j $(nproc) bindeb-pkg > ... install the resulting .deb package and confirm it the problem does not exist. > > This is actually an intersting step, I would be interested to see > if any surrounding changes did influence that it does not work > anymore with 6.17.11. > > # test 6.17.12 to ensure this is "bad" > git checkout v6.17.12 > make my_defconfig > make -j $(nproc) bindeb-pkg > ... install the resulting .deb package and confirm the problem exists. > > Now if and only if that is confirmed, the bisection can start: > > git bisect start > git bisect good v6.17.11 > git bisect bad v6.17.12 > > In each bisection step git checks out a state between the oldest > known-bad and the newest known-good commit. In each step test using: > > make my_defconfig > make -j $(nproc) bindeb-pkg > ... install, try to boot / verify if problem exists > > and if the problem is hit run: > > git bisect bad > > and if the problem doesn't trigger run: > > git bisect good > > . Please pay attention to always select the just built kernel for > booting, it won't always be the default kernel picked up by grub. > > Iterate until git announces to have identified the first bad commit. > > Then provide the output of > > git bisect log > > In the course of the bisection you might have to uninstall previous > kernels again to not exhaust the disk space in /boot. Also in the end > uninstall all self-built kernels again. > > Regards, > Salvatore
[toc] | [prev] | [next] | [standalone]
| From | "Debian Bug Tracking System" <owner@bugs.debian.org> |
|---|---|
| Date | 2025-12-26 20:50 +0100 |
| Subject | Bug#1123985: marked as done (linux-image-6.17.12+deb14-amd64: LUKS passphrase never matches on 6.17.12 and 6.17.13. Works fine on 6.17.11.) |
| Message-ID | <M6lYZ-5RAc-1@gated-at.bofh.it> |
| In reply to | #90570 |
[Multipart message — attachments visible in raw view] — view raw
Your message dated Fri, 26 Dec 2025 20:27:38 +0100 with message-id <aU7hqlQFB7RDy2sI@eldamar.lan> and subject line Re: Bug#1123985: It seems a keymap issue has caused the Debian Bug report #1123985, regarding linux-image-6.17.12+deb14-amd64: LUKS passphrase never matches on 6.17.12 and 6.17.13. Works fine on 6.17.11. to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 1123985: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1123985 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.kernel
csiph-web