Groups > linux.debian.kernel > #89675 > unrolled thread

Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules

Started by	E Shattow <lucent@gmail.com>
First post	2025-10-19 10:00 +0200
Last post	2025-10-25 10:20 +0200
Articles	3 — 2 participants

Back to article view | Back to linux.debian.kernel

  Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules E Shattow <lucent@gmail.com> - 2025-10-19 10:00 +0200
    Bug#1118394: Acknowledgement (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules) E Shattow <lucent@gmail.com> - 2025-10-21 06:30 +0200
    Bug#1118394: marked as done (linux-image-6.17.2-riscv64: Request  to enable Realtek RTW89_8851BU, RTW89_8852BU as modules) "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-10-25 10:20 +0200

#89675 — Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules

From	E Shattow <lucent@gmail.com>
Date	2025-10-19 10:00 +0200
Subject	Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules
Message-ID	<LHwuC-6jAH-3@gated-at.bofh.it>

Package: src:linux
Version: 6.17.2-1~exp1
Severity: normal
X-Debbugs-Cc: lucent@gmail.com

Dear Maintainer,

Please enable RTW89_8851BU, RTW89_8852BU as modules, these are new
for the Kconfig as of 6.17 Linux kernel. This will allow Pine64
Star64 PCIe-connected WiFi module to function. Thanks!

-- Package-specific info:
** Version:
Linux version 6.17.2-riscv64 (debian-kernel@lists.debian.org) (riscv64-linux-gnu-gcc-15 (Debian 15.2.0-4) 15.2.0, GNU ld (GNU Binutils for Debian) 2.45) #1 SMP PREEMPT Debian 6.17.2-1~exp1 (2025-10-13)

** Command line:
BOOT_IMAGE=/boot/vmlinux-6.17.2-riscv64 root=UUID=e7f17542-3ac6-4d3b-8457-b3fc416051cf ro quiet

** Not tainted

** Kernel log:
[   15.046519] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   15.055017] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   15.055437] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   15.064019] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[   15.083286] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   15.103893] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   15.104873] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   15.105802] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[   15.106915] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   15.107793] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   15.125752] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   15.143434] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   15.205120] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   15.219561] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   15.229930] EXT4-fs (nvme0n1p3): re-mounted e7f17542-3ac6-4d3b-8457-b3fc416051cf r/w.
[   15.242566] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   15.250531] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   15.266931] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[   15.267132] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   15.295217] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[   15.302627] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   15.304489] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   15.305669] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   15.405924] systemd-journald[301]: Collecting audit messages is disabled.
[   15.411931] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   15.413865] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   15.418691] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[   15.445837] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   15.447735] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   15.455921] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[   15.456926] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[   15.478835] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[   15.486211] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[   15.501835] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[   15.672985] systemd[1]: Started systemd-journald.service - Journal Service.
[   15.897003] systemd-journald[301]: Received client request to flush runtime journal.
[   16.979844] at24 5-0050: supply vcc not found, using dummy regulator
[   16.988940] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   17.329352] spi-nor spi0.0: supply vcc not found, using dummy regulator
[   17.374026] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[   17.374048] Creating 3 MTD partitions on "13010000.spi.0":
[   17.374060] 0x000000000000-0x0000000f0000 : "spl"
[   17.375158] 0x0000000f0000-0x000000100000 : "uboot-env"
[   17.376123] 0x000000100000-0x000001000000 : "uboot"
[   17.427935] Adding 3906556k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:3906556k SS
[   17.525672] Adding 64509948k swap on /dev/nvme0n1p4.  Priority:-3 extents:1 across:64509948k SS
[   17.611562] usbcore: registered new interface driver usbfs
[   17.611628] usbcore: registered new interface driver hub
[   17.611691] usbcore: registered new device driver usb
[   17.644634] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.899271] audit: type=1400 audit(1760859687.077:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=421 comm="apparmor_parser"
[   17.901459] audit: type=1400 audit(1760859687.077:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=420 comm="apparmor_parser"
[   17.903145] audit: type=1400 audit(1760859687.081:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=422 comm="apparmor_parser"
[   17.905554] audit: type=1400 audit(1760859687.081:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=423 comm="apparmor_parser"
[   17.913462] audit: type=1400 audit(1760859687.089:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=425 comm="apparmor_parser"
[   17.922699] audit: type=1400 audit(1760859687.097:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=426 comm="apparmor_parser"
[   17.922725] audit: type=1400 audit(1760859687.101:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=427 comm="apparmor_parser"
[   17.929459] audit: type=1400 audit(1760859687.105:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=428 comm="apparmor_parser"
[   17.935593] audit: type=1400 audit(1760859687.113:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=431 comm="apparmor_parser"
[   17.938085] audit: type=1400 audit(1760859687.117:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=429 comm="apparmor_parser"
[   18.190356] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.190407] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   18.190630] xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c8 hci version 0x100 quirks 0x0000002000008010
[   18.190688] xhci-hcd xhci-hcd.0.auto: irq 66, io mem 0x10110000
[   18.190943] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.190962] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   18.190980] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   18.191281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17
[   18.191297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.191307] usb usb1: Product: xHCI Host Controller
[   18.191316] usb usb1: Manufacturer: Linux 6.17.2-riscv64 xhci-hcd
[   18.191325] usb usb1: SerialNumber: xhci-hcd.0.auto
[   18.191991] hub 1-0:1.0: USB hub found
[   18.192047] hub 1-0:1.0: 1 port detected
[   18.192622] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   18.192832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17
[   18.192845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.192855] usb usb2: Product: xHCI Host Controller
[   18.192865] usb usb2: Manufacturer: Linux 6.17.2-riscv64 xhci-hcd
[   18.192874] usb usb2: SerialNumber: xhci-hcd.0.auto
[   18.193551] hub 2-0:1.0: USB hub found
[   18.193633] hub 2-0:1.0: 1 port detected
[   18.437515] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   18.573863] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[   18.573888] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   18.573898] usb 1-1: Product: USB 2.0 Hub [MTT]
[   18.574862] hub 1-1:1.0: USB hub found
[   18.575849] hub 1-1:1.0: 4 ports detected
[   20.730290] starfive-dwmac 16030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   20.734793] starfive-dwmac 16030000.ethernet end0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[   20.745502] dwmac4: Master AXI performs fixed burst length
[   20.746912] starfive-dwmac 16030000.ethernet end0: No Safety Features support found
[   20.746948] starfive-dwmac 16030000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[   20.747268] starfive-dwmac 16030000.ethernet end0: registered PTP clock
[   20.754235] starfive-dwmac 16030000.ethernet end0: configuring for phy/rgmii-id link mode
[   21.711476] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   22.648051] evm: overlay not supported
[   23.127256] Bridge firewalling registered
[   23.467933] Initializing XFRM netlink socket
[   23.841599] starfive-dwmac 16030000.ethernet end0: Link is Up - 1Gbps/Full - flow control off

** Model information
Device Tree model: Milk-V Mars

** Configuration for modprobe:
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0

** Loaded modules:
nf_conntrack_netlink
xfrm_user
xfrm_algo
xt_addrtype
nft_compat
x_tables
br_netfilter
nft_masq
nft_chain_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
bridge
stp
llc
nf_tables
overlay
xhci_plat_hcd
xhci_hcd
binfmt_misc
cdns3
udc_core
snd_soc_simple_card
jh7110_pwmdac
snd_soc_simple_card_utils
cdns_usb_common
snd_soc_spdif_tx
roles
nls_ascii
snd_soc_core
nls_cp437
usbcore
vfat
fat
ofpart
snd_compress
spi_nor
snd_pcm_dmaengine
snd_pcm
mtd
snd_timer
cdns3_starfive
snd
usb_common
jh7110_trng
leds_gpio
at24
sfctemp
cpufreq_dt
soundcore
drm
configfs
nfnetlink
efivarfs
autofs4
ext4
crc16
mbcache
jbd2
crc32c_cryptoapi
btrfs
blake2b_generic
xor
zlib_deflate
raid6_pq
motorcomm
dwmac_starfive
stmmac_platform
stmmac
nvme
pcs_xpcs
nvme_core
mdio_devres
dw_mmc_starfive
of_mdio
fixed_phy
dw_mmc_pltfm
dw_mmc
phylink
axp20x_regulator
nvme_keyring
nvme_auth
axp20x_i2c
fwnode_mdio
mmc_core
axp20x
libphy
regmap_i2c
dw_axi_dmac_platform
virt_dma
clk_starfive_jh7110_aon
starfive_wdt
clk_starfive_jh7110_isp
mdio_bus
watchdog
phy_jh7110_dphy_rx
spi_cadence_quadspi
clk_starfive_jh7110_vout
clk_starfive_jh7110_stg
phy_jh7110_pcie
phy_jh7110_usb
i2c_designware_platform

** PCI devices:
0000:00:00.0 PCI bridge [0604]: PLDA XpressRich-AXI Ref Design [1556:1111] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 38
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: 30000000-300fffff [size=1M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

0000:01:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
	Subsystem: Samsung Electronics Co Ltd SSD 970 EVO/PRO [144d:a801]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 37
	Region 0: Memory at 30000000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: nvme
	Kernel modules: nvme

0001:00:00.0 PCI bridge [0604]: PLDA XpressRich-AXI Ref Design [1556:1111] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 60
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: [disabled] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub


-- System Information:
Debian Release: 13.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: riscv64

Kernel: Linux 6.17.2-riscv64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.17.2-riscv64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.148.3
ii  kmod                                    34.2-2
ii  linux-base                              4.12

Versions of packages linux-image-6.17.2-riscv64 recommends:
ii  apparmor  4.1.0-1

Versions of packages linux-image-6.17.2-riscv64 suggests:
pn  debian-kernel-handbook  <none>
ii  firmware-linux-free     20241210-2
pn  linux-doc-6.17          <none>

Versions of packages linux-image-6.17.2-riscv64 is related to:
ii  firmware-amd-graphics      20250410-2
ii  firmware-atheros           20250410-2
pn  firmware-bnx2              <none>
pn  firmware-bnx2x             <none>
ii  firmware-brcm80211         20250410-2
pn  firmware-cavium            <none>
pn  firmware-cirrus            <none>
ii  firmware-intel-graphics    20250410-2
ii  firmware-intel-misc        20250410-2
ii  firmware-intel-sound       20250410-2
ii  firmware-ipw2x00           20250410-2
pn  firmware-ivtv              <none>
ii  firmware-iwlwifi           20250410-2
pn  firmware-libertas          <none>
pn  firmware-marvell-prestera  <none>
ii  firmware-mediatek          20250410-2
ii  firmware-misc-nonfree      20250410-2
pn  firmware-myricom           <none>
pn  firmware-netronome         <none>
pn  firmware-netxen            <none>
ii  firmware-nvidia-graphics   20250410-2
pn  firmware-qcom-soc          <none>
pn  firmware-qlogic            <none>
ii  firmware-realtek           20250410-2
pn  firmware-samsung           <none>
pn  firmware-siano             <none>
pn  firmware-ti-connectivity   <none>
pn  xen-hypervisor             <none>

-- no debconf information

[toc] | [next] | [standalone]

#89690 — Bug#1118394: Acknowledgement (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)

From	E Shattow <lucent@gmail.com>
Date	2025-10-21 06:30 +0200
Subject	Bug#1118394: Acknowledgement (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)
Message-ID	<LIcat-6M0X-3@gated-at.bofh.it>
In reply to	#89675

On Sun, Oct 19, 2025 at 12:55 AM Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
>
> Thank you for filing a new Bug report with Debian.
>
> You can follow progress on this Bug here: 1118394: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1118394.
>
> This is an automatically generated reply to let you know your message
> has been received.
>
> Your message is being forwarded to the package maintainers and other
> interested parties for their attention; they will reply in due course.
>
> As you requested using X-Debbugs-CC, your message was also forwarded to
>   lucent@gmail.com
> (after having been given a Bug report number, if it did not have one).
>
> Your message has been sent to the package maintainer(s):
>  debian-kernel@lists.debian.org
>
> If you wish to submit further information on this problem, please
> send it to 1118394@bugs.debian.org.
>
> Please do not send mail to owner@bugs.debian.org unless you wish
> to report a problem with the Bug-tracking system.
>
> --
> 1118394: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1118394
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems

Correction: This  is connected on USB for Star64 as

Bus 001 Device 004: ID 0bda:b852 Realtek Semiconductor Corp. 802.11ax
WLAN Adapter

$ lsmod | grep rtw
rtw89_8852bu           12288  0
rtw89_8852b           356352  1 rtw89_8852bu
rtw89_8852b_common     81920  1 rtw89_8852b
rtw89_usb              24576  1 rtw89_8852bu
rtw89_core           1019904  3 rtw89_8852b,rtw89_8852b_common,rtw89_usb
mac80211             1646592  2 rtw89_core,rtw89_usb
cfg80211             1454080  3 rtw89_core,mac80211,rtw89_8852b_common
rfkill                 49152  4 rtw89_core,bluetooth,cfg80211
usbcore               507904  7
xhci_hcd,rtw89_8852bu,btmtk,cdns_usb_common,btusb,xhci_plat_hcd,rtw89_usb

not on PCIe. I got this confused, anyway, the bug report and request
for enabling these modules in Linux Kernel packaging remains valid. -E

[toc] | [prev] | [next] | [standalone]

#89766 — Bug#1118394: marked as done (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)

From	"Debian Bug Tracking System" <owner@bugs.debian.org>
Date	2025-10-25 10:20 +0200
Subject	Bug#1118394: marked as done (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)
Message-ID	<LJHFi-7OlI-15@gated-at.bofh.it>
In reply to	#89675

[Multipart message — attachments visible in raw view] — view raw

Your message dated Sat, 25 Oct 2025 08:10:13 +0000
with message-id <E1vCZLp-00DU1M-0q@fasolo.debian.org>
and subject line Bug#1118394: fixed in linux 6.17.5-1~exp1
has caused the Debian Bug report #1118394,
regarding linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1118394: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1118394
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

[toc] | [prev] | [standalone]

csiph-web

Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules

Contents

#89675 — Bug#1118394: linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules

#89690 — Bug#1118394: Acknowledgement (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)

#89766 — Bug#1118394: marked as done (linux-image-6.17.2-riscv64: Request to enable Realtek RTW89_8851BU, RTW89_8852BU as modules)