Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #86694 > unrolled thread
| Started by | Bastian Blank <waldi@debian.org> |
|---|---|
| First post | 2025-03-31 17:40 +0200 |
| Last post | 2025-03-31 17:40 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.debian.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Bug#1101754: linux-image-amd64: HP P410 controller incompatibility; hpsa: lockup detected error Bastian Blank <waldi@debian.org> - 2025-03-31 17:40 +0200
| From | Bastian Blank <waldi@debian.org> |
|---|---|
| Date | 2025-03-31 17:40 +0200 |
| Subject | Bug#1101754: linux-image-amd64: HP P410 controller incompatibility; hpsa: lockup detected error |
| Message-ID | <KwpoZ-a2JS-3@gated-at.bofh.it> |
Control: tags -1 moreinfo On Mon, Mar 31, 2025 at 03:27:53PM +0200, Serge S. Bartosh wrote: > Device: P410 controller used in HP DL320 G6 server. This hardware is over 15 years old. > BIOS: W07 (latest) According to the HP web page, the latest firmware is 2018.05.21, yours is from 2015. > Kernel taint flags: TAINT_FIRMWARE_WORKAROUND The firmware was already a problem at this time. > [ 6.730629] DMAR: DRHD: handling fault status reg 2 > [ 6.730699] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr 0xe763e000 [fault reason 0x06] PTE Read access is not set > [ 6.730706] NMI: PCI system error (SERR) for reason b1 on CPU 0. > [ 6.730711] Dazed and confused, but trying to continue > [ 16.730651] DMAR: DRHD: handling fault status reg 102 > [ 16.730659] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr 0xe763e000 [fault reason 0x06] PTE Read access is not set > [ 26.730661] DMAR: DRHD: handling fault status reg 202 > [ 26.730671] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr 0xe763e000 [fault reason 0x06] PTE Read access is not set > [ 36.730693] DMAR: DRHD: handling fault status reg 302 > [ 36.730705] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr 0xe763e000 [fault reason 0x06] PTE Read access is not set I would assume this have something to do with this problem. Try "intel_iommu=off". Bastian -- There is a multi-legged creature crawling on your shoulder. -- Spock, "A Taste of Armageddon", stardate 3193.9
Back to top | Article view | linux.debian.kernel
csiph-web