Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #86489 > unrolled thread
| Started by | Bud Pennington <budpenn@shaw.ca> |
|---|---|
| First post | 2025-03-18 06:30 +0100 |
| Last post | 2025-03-23 00:20 +0100 |
| Articles | 5 — 3 participants |
Back to article view | Back to linux.debian.kernel
Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login Bud Pennington <budpenn@shaw.ca> - 2025-03-18 06:30 +0100
Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login Salvatore Bonaccorso <carnil@debian.org> - 2025-03-18 08:40 +0100
Processed: Re: Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-03-18 08:40 +0100
Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login Salvatore Bonaccorso <carnil@debian.org> - 2025-03-22 08:40 +0100
Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login Bud Pennington <budpenn@shaw.ca> - 2025-03-23 00:20 +0100
| From | Bud Pennington <budpenn@shaw.ca> |
|---|---|
| Date | 2025-03-18 06:30 +0100 |
| Subject | Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login |
| Message-ID | <KrxGx-6TNP-1@gated-at.bofh.it> |
Package: src:linux
Version: 6.1.129-1
Severity: normal
X-Debbugs-Cc: budpenn@shaw.ca
Dear Maintainer,
I was mounting a memory card on login with the command
" udisksctl mount --block-device /dev/disk/by-uuid/DFEE-DE4E" in the Session Application Autostart
this worked with linux-image-6.1.0-31-amd64 however after upgrading to linux-image-6-1.0-32-amd64,
the card does not appear in thunar but is mounted if it removed and re-inserted.
If the computer is booted with image 6.1.0.31 the card is mounted as expected.
-- Package-specific info:
** Version:
Linux version 6.1.0-32-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-32-amd64 root=UUID=dee4dc85-2598-4217-9ab1-f1bc50d60b27 ro quiet
** Not tainted
** Kernel log:
[ 8.514881] audit: type=1400 audit(1742270674.991:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=513 comm="apparmor_parser"
[ 8.566121] iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x312
[ 8.580952] thermal thermal_zone4: failed to read out thermal zone (-61)
[ 8.654319] iwlwifi 0000:00:0c.0: base HW address: 7c:50:79:78:9c:63, OTP minor version: 0x4
[ 8.746735] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 8.801032] iwlwifi 0000:00:0c.0 wlp0s12f0: renamed from wlan0
[ 8.802178] Bluetooth: Core ver 2.22
[ 8.802222] NET: Registered PF_BLUETOOTH protocol family
[ 8.802224] Bluetooth: HCI device and connection manager initialized
[ 8.802770] Bluetooth: HCI socket layer initialized
[ 8.802774] Bluetooth: L2CAP socket layer initialized
[ 8.802781] Bluetooth: SCO socket layer initialized
[ 8.871518] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input34
[ 8.871610] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input35
[ 8.871678] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input36
[ 8.871744] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input37
[ 8.871808] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input38
[ 9.013460] usbcore: registered new interface driver btusb
[ 9.020110] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 9.021136] Bluetooth: hci0: Device revision is 2
[ 9.021139] Bluetooth: hci0: Secure boot is enabled
[ 9.021141] Bluetooth: hci0: OTP lock is enabled
[ 9.021142] Bluetooth: hci0: API lock is enabled
[ 9.021143] Bluetooth: hci0: Debug lock is disabled
[ 9.021144] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 9.025964] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.sfi
[ 9.025977] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 9.026060] Bluetooth: hci0: Boot Address: 0x40800
[ 9.026062] Bluetooth: hci0: Firmware Version: 108-45.22
[ 9.227157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.227164] Bluetooth: BNEP filters: protocol multicast
[ 9.227171] Bluetooth: BNEP socket layer initialized
[ 9.299427] NET: Registered PF_QIPCRTR protocol family
[ 9.441805] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[ 9.469096] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 9.665346] r8169 0000:02:00.0 enp2s0: Link is Down
[ 10.445530] Bluetooth: hci0: Waiting for firmware download to complete
[ 10.446083] Bluetooth: hci0: Firmware loaded in 1386820 usecs
[ 10.446133] Bluetooth: hci0: Waiting for device to boot
[ 10.460111] Bluetooth: hci0: Device booted in 13671 usecs
[ 10.460493] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.ddc
[ 10.460499] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 10.462133] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 10.463129] Bluetooth: hci0: Firmware revision 0.1 build 108 week 45 2022
[ 10.519383] Bluetooth: MGMT ver 1.22
[ 10.524943] NET: Registered PF_ALG protocol family
[ 13.616889] wlp0s12f0: authenticate with 00:fc:8d:42:d9:f8
[ 13.616919] wlp0s12f0: 80 MHz not supported, disabling VHT
[ 13.618744] wlp0s12f0: send auth to 00:fc:8d:42:d9:f8 (try 1/3)
[ 13.697312] wlp0s12f0: authenticated
[ 13.701101] wlp0s12f0: associate with 00:fc:8d:42:d9:f8 (try 1/3)
[ 13.707291] wlp0s12f0: RX AssocResp from 00:fc:8d:42:d9:f8 (capab=0x1431 status=0 aid=1)
[ 13.710856] wlp0s12f0: associated
[ 13.723811] wlp0s12f0: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:fc:8d:42:d9:f8
[ 13.957806] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s12f0: link becomes ready
[ 117.967285] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 117.967304] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 243.100017] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 243.100074] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 368.129917] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 368.129949] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 493.263100] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 493.263139] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 618.395459] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 618.395497] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 743.425376] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 743.425408] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 868.558264] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 868.558302] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 993.690741] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 993.690777] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1118.823410] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1118.823447] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1243.853293] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1243.853312] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1368.986293] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1368.986331] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1494.118647] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1619.251331] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1619.251369] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1744.384083] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1744.384121] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1869.413762] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1869.413781] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1994.546673] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 1994.546711] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2119.679261] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2119.679299] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2244.811917] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2244.811959] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2369.842048] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2369.842084] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2494.974629] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2494.974667] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2620.107211] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2620.107249] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2745.137277] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2745.137313] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2870.270023] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 2870.270061] [UFW BLOCK] IN=wlp0s12f0 OUT= MAC=01:00:5e:00:00:01:00:fc:8d:42:d9:f2:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
** Model information
sys_vendor: Acer
product_name: TravelMate B311-31
product_version: V1.14
chassis_vendor: Acer
chassis_version: Chassis Version
bios_vendor: Insyde Corp.
bios_version: V1.14
board_vendor: GLK
board_name: Maracas_GL
board_version: V1.14
** Loaded modules:
ccm
cmac
algif_hash
algif_skcipher
af_alg
qrtr
bnep
ip6t_REJECT
nf_reject_ipv6
xt_hl
ip6_tables
ip6t_rt
ipt_REJECT
nf_reject_ipv4
xt_LOG
nf_log_syslog
x86_pkg_temp_thermal
intel_powerclamp
coretemp
nft_limit
kvm_intel
btusb
xt_limit
btrtl
btbcm
xt_addrtype
btintel
xt_tcpudp
btmtk
kvm
bluetooth
snd_hda_codec_hdmi
irqbypass
xt_conntrack
snd_sof_pci_intel_apl
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
snd_sof_intel_hda_common
nft_compat
soundwire_intel
soundwire_generic_allocation
soundwire_cadence
jitterentropy_rng
snd_sof_intel_hda
snd_sof_pci
ghash_clmulni_intel
snd_sof_xtensa_dsp
iwlmvm
snd_sof
snd_sof_utils
sha512_ssse3
sha256_ssse3
soundwire_bus
mac80211
nf_tables
snd_soc_skl
sha1_ssse3
sha512_generic
libcrc32c
nfnetlink
snd_soc_hdac_hda
libarc4
snd_hda_ext_core
snd_hda_codec_realtek
snd_soc_sst_ipc
binfmt_misc
snd_soc_sst_dsp
snd_soc_acpi_intel_match
snd_hda_codec_generic
snd_soc_acpi
ledtrig_audio
snd_soc_core
snd_compress
iwlwifi
snd_hda_intel
snd_intel_dspcfg
snd_intel_sdw_acpi
mei_hdcp
uvcvideo
snd_hda_codec
videobuf2_vmalloc
videobuf2_memops
nls_ascii
intel_rapl_msr
nls_cp437
vfat
videobuf2_v4l2
snd_hda_core
fat
videobuf2_common
ctr
rtsx_usb_ms
snd_hwdep
aesni_intel
memstick
crypto_simd
snd_pcm
videodev
cryptd
rapl
acer_wmi
wdat_wdt
snd_timer
intel_cstate
watchdog
mc
pcspkr
sparse_keymap
wmi_bmof
mei_me
drbg
ansi_cprng
cfg80211
processor_thermal_device_pci_legacy
snd
ecdh_generic
ecc
processor_thermal_device
processor_thermal_rfim
processor_thermal_mbox
processor_thermal_rapl
mei
soundcore
rfkill
intel_rapl_common
intel_soc_dts_iosf
ac
acer_wireless
int3400_thermal
soc_button_array
intel_pmc_core
int3403_thermal
int340x_thermal_zone
acpi_thermal_rel
joydev
serio_raw
evdev
msr
parport_pc
ppdev
lp
parport
fuse
dm_mod
loop
efi_pstore
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_logitech_hidpp
rtsx_usb_sdmmc
rtsx_usb
hid_logitech_dj
usbhid
mmc_block
i915
drm_buddy
i2c_algo_bit
drm_display_helper
hid_multitouch
xhci_pci
hid_generic
xhci_hcd
cec
rc_core
ttm
r8169
sdhci_pci
drm_kms_helper
realtek
cqhci
crct10dif_pclmul
crct10dif_common
usbcore
sdhci
i2c_hid_acpi
i2c_hid
i2c_i801
crc32_pclmul
mdio_devres
crc32c_intel
drm
libphy
lpc_ich
i2c_smbus
mmc_core
intel_lpss_pci
usb_common
intel_lpss
hid
idma64
video
battery
wmi
button
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether e8:6c:c7:77:7c:85 brd ff:ff:ff:ff:ff:ff
3: wlp0s12f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 7c:50:79:78:9c:63 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.16/24 brd 192.168.0.255 scope global dynamic noprefixroute wlp0s12f0
valid_lft 601927sec preferred_lft 601927sec
inet6 fd00:fc:8d42:d9f2:d68d:6007:c54d:570a/64 scope global temporary dynamic
valid_lft 535427sec preferred_lft 83247sec
inet6 fd00:fc:8d42:d9f2:7e50:79ff:fe78:9c63/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 535427sec preferred_lft 401570sec
inet6 fe80::7e50:79ff:fe78:9c63/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 9154 106 0 0 0 0 0 0 9154 106 0 0 0 0 0 0
enp2s0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlp0s12f0: 6485526 9434 0 0 0 0 0 0 1488983 7429 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Gemini Lake Host Bridge [8086:31f0] (rev 06)
Subsystem: Acer Incorporated [ALI] Gemini Lake Host Bridge [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
00:00.1 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant [8086:318c] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 24
IOMMU group: 1
Region 0: Memory at 80000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device_pci_legacy
00:00.3 System peripheral [0880]: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model [8086:3190] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Gaussian Mixture Model [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
IOMMU group: 1
Region 0: Memory at a1218000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation GeminiLake [UHD Graphics 600] [8086:3185] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] GeminiLake [UHD Graphics 600] [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
IOMMU group: 0
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:0c.0 Network controller [0280]: Intel Corporation Gemini Lake PCH CNVi WiFi [8086:31dc] (rev 06)
Subsystem: Intel Corporation Wireless-AC 9560 [8086:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
IOMMU group: 2
Region 0: Memory at a1210000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:0e.0 Audio device [0403]: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio [8086:3198] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor High Definition Audio [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 129
IOMMU group: 3
Region 0: Memory at a1214000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at a1000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci_intel_apl
00:0f.0 Communication controller [0780]: Intel Corporation Celeron/Pentium Silver Processor Trusted Execution Engine Interface [8086:319a] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Trusted Execution Engine Interface [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
IOMMU group: 4
Region 0: Memory at a1219000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:13.0 PCI bridge [0604]: Intel Corporation Gemini Lake PCI Express Root Port [8086:31d8] (rev f6) (prog-if 00 [Normal decode])
Subsystem: Acer Incorporated [ALI] Gemini Lake PCI Express Root Port [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
IOMMU group: 5
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PCI bridge [0604]: Intel Corporation Gemini Lake PCI Express Root Port [8086:31d6] (rev f6) (prog-if 00 [Normal decode])
Subsystem: Acer Incorporated [ALI] Gemini Lake PCI Express Root Port [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 123
IOMMU group: 6
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 1000-1fff [size=4K] [16-bit]
Memory behind bridge: a1100000-a11fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.0 USB controller [0c03]: Intel Corporation Celeron/Pentium Silver Processor USB 3.0 xHCI Controller [8086:31a8] (rev 06) (prog-if 30 [XHCI])
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor USB 3.0 xHCI Controller [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
IOMMU group: 7
Region 0: Memory at a1200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor I2C 0 [8086:31ac] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor I2C 0 [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
IOMMU group: 8
Region 0: Memory at a121a000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a121b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.3 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor I2C 3 [8086:31b2] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor I2C 3 [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 30
IOMMU group: 8
Region 0: Memory at a121c000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a121d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.0 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor I2C 4 [8086:31b4] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor I2C 4 [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
IOMMU group: 9
Region 0: Memory at a121e000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a121f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.1 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor I2C 5 [8086:31b6] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor I2C 5 [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 32
IOMMU group: 9
Region 0: Memory at a1220000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a1221000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.2 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor I2C 6 [8086:31b8] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor I2C 6 [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 33
IOMMU group: 9
Region 0: Memory at a1222000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a1223000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.0 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller [8086:31bc] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Serial IO UART Host Controller [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 4
IOMMU group: 10
Region 0: Memory at a1224000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a1225000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.1 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller [8086:31be] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Serial IO UART Host Controller [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 5
IOMMU group: 10
Region 0: Memory at a1226000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a1227000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.3 Signal processing controller [1180]: Intel Corporation Celeron/Pentium Silver Processor Serial IO UART Host Controller [8086:31ee] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Serial IO UART Host Controller [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 7
IOMMU group: 10
Region 0: Memory at a1228000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a1229000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1c.0 SD Host controller [0805]: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller [8086:31cc] (rev 06) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller [1025:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
IOMMU group: 11
Region 0: Memory at a122a000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at a122b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Celeron/Pentium Silver Processor LPC Controller [8086:31e8] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor LPC Controller [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 12
Kernel modules: lpc_ich
00:1f.1 SMBus [0c05]: Intel Corporation Celeron/Pentium Silver Processor Gaussian Mixture Model [8086:31d4] (rev 06)
Subsystem: Acer Incorporated [ALI] Celeron/Pentium Silver Processor Gaussian Mixture Model [1025:1430]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
IOMMU group: 12
Region 0: Memory at a122c000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Acer Incorporated [ALI] RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [1025:1430]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
IOMMU group: 13
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at a1104000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at a1100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 04f2:b64f Chicony Electronics Co., Ltd HD User Facing
Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Nano Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.10
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.1.0-32-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-32-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142+deb12u1
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-32-amd64 recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-32-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.06-13+deb12u1
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-32-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20230210-5
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20230210-5
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[toc] | [next] | [standalone]
| From | Salvatore Bonaccorso <carnil@debian.org> |
|---|---|
| Date | 2025-03-18 08:40 +0100 |
| Message-ID | <KrzIl-6V1B-1@gated-at.bofh.it> |
| In reply to | #86489 |
Control: tags -1 + moreinfo Hi Bud, On Mon, Mar 17, 2025 at 10:20:09PM -0700, Bud Pennington wrote: > Package: src:linux > Version: 6.1.129-1 > Severity: normal > X-Debbugs-Cc: budpenn@shaw.ca > > Dear Maintainer, > > I was mounting a memory card on login with the command > " udisksctl mount --block-device /dev/disk/by-uuid/DFEE-DE4E" in the Session Application Autostart > this worked with linux-image-6.1.0-31-amd64 however after upgrading to linux-image-6-1.0-32-amd64, > the card does not appear in thunar but is mounted if it removed and re-inserted. > If the computer is booted with image 6.1.0.31 the card is mounted as expected. For both cases once booted with 6.1.128-1 and once with 6.1.129-1 can you provide the foll boot kernel log with the card inserted? Regards, Salvatore
[toc] | [prev] | [next] | [standalone]
| From | "Debian Bug Tracking System" <owner@bugs.debian.org> |
|---|---|
| Date | 2025-03-18 08:40 +0100 |
| Subject | Processed: Re: Bug#1100746: linux-image-6.1.0-32-amd64: Fails to mount memory card on login |
| Message-ID | <KrzIl-6V1B-15@gated-at.bofh.it> |
| In reply to | #86489 |
Processing control commands: > tags -1 + moreinfo Bug #1100746 [src:linux] linux-image-6.1.0-32-amd64: Fails to mount memory card on login Added tag(s) moreinfo. -- 1100746: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1100746 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
[toc] | [prev] | [next] | [standalone]
| From | Salvatore Bonaccorso <carnil@debian.org> |
|---|---|
| Date | 2025-03-22 08:40 +0100 |
| Message-ID | <Kt1Cx-7Qw2-1@gated-at.bofh.it> |
| In reply to | #86489 |
[Multipart message — attachments visible in raw view] — view raw
Hi Bud,
On Tue, Mar 18, 2025 at 08:06:39AM -0700, Bud Pennington wrote:
> Hi
>
> I've attached the two files. Hopefully this is what you want. If not please
> advise me how to get what you want. Incidentally this may be machine
> specific. I tried a different card and it didn't work either but when I
> tried them in a different laptop they appeared when booted with 6.1.129-1.
Thanks for providing the logs.
While looking at those I noticed that a MCE is logged,
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: a600000000020408
mce: [Hardware Error]: TSC 0 ADDR fef4c9e0
mce: [Hardware Error]: PROCESSOR 0:706a8 TIME 1742306754 SOCKET 0 APIC 0 microcode 24
So I see the following difference, int the 6.128-1 log you have:
[ 7.318288] mmc1: new ultra high speed SDR50 SDXC card at address 0001
[ 7.320597] mmcblk1: mmc1:0001 00000 59.6 GiB
[ 7.327986] mmcblk1: p1
[...]
[ 23.509687] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
This does no appear in the 6.1.129 log.
The card reader is mentioned as
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
There is one change which is related and which is 6.1.129 applied:
commit 93a56dbe12327e73c95ce8cd991c1335aebc8e1c
Author: Sean Rhodes <sean@starlabs.systems>
Date: Tue Nov 19 08:58:15 2024 +0000
drivers/card_reader/rtsx_usb: Restore interrupt based detection
commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream.
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit
00d8521dcd23 ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code")
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit was later reverted:
commit 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843
Author: Christian Heusel <christian@heusel.eu>
Date: Mon Feb 24 09:32:59 2025 +0100
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable@vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira@tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The revert commit is in 6.14-rc6 and backported to 6.13.7, 6.12.19 *and*
6.1.131.
So I believe it will be fixed with the next upload, but if you can I
would appreciate if you would test a kernel build with the attached
pach, to verify it fixes your issue. How you can do that with our
simple-patching helper is documented at:
https://kernel-team.pages.debian.net/kernel-handbook/ch-common-tasks.html#id-1.6.6.4
Regards,
Salvatore
[toc] | [prev] | [next] | [standalone]
| From | Bud Pennington <budpenn@shaw.ca> |
|---|---|
| Date | 2025-03-23 00:20 +0100 |
| Message-ID | <Ktgid-7ZNl-3@gated-at.bofh.it> |
| In reply to | #86534 |
Hi Salvatore
The patch worked. Thank you very much.
Bud
On 2025-03-22 00:27, Salvatore Bonaccorso wrote:
> Hi Bud,
>
> On Tue, Mar 18, 2025 at 08:06:39AM -0700, Bud Pennington wrote:
>> Hi
>>
>> I've attached the two files. Hopefully this is what you want. If not please
>> advise me how to get what you want. Incidentally this may be machine
>> specific. I tried a different card and it didn't work either but when I
>> tried them in a different laptop they appeared when booted with 6.1.129-1.
> Thanks for providing the logs.
>
> While looking at those I noticed that a MCE is logged,
>
> mce: [Hardware Error]: Machine check events logged
> mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: a600000000020408
> mce: [Hardware Error]: TSC 0 ADDR fef4c9e0
> mce: [Hardware Error]: PROCESSOR 0:706a8 TIME 1742306754 SOCKET 0 APIC 0 microcode 24
>
> So I see the following difference, int the 6.128-1 log you have:
>
> [ 7.318288] mmc1: new ultra high speed SDR50 SDXC card at address 0001
> [ 7.320597] mmcblk1: mmc1:0001 00000 59.6 GiB
> [ 7.327986] mmcblk1: p1
> [...]
> [ 23.509687] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>
> This does no appear in the 6.1.129 log.
>
> The card reader is mentioned as
>
> Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
>
> There is one change which is related and which is 6.1.129 applied:
>
> commit 93a56dbe12327e73c95ce8cd991c1335aebc8e1c
> Author: Sean Rhodes <sean@starlabs.systems>
> Date: Tue Nov 19 08:58:15 2024 +0000
>
> drivers/card_reader/rtsx_usb: Restore interrupt based detection
>
> commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream.
>
> This commit reintroduces interrupt-based card detection previously
> used in the rts5139 driver. This functionality was removed in commit
> 00d8521dcd23 ("staging: remove rts5139 driver code").
>
> Reintroducing this mechanism fixes presence detection for certain card
> readers, which with the current driver, will taken approximately 20
> seconds to enter S3 as `mmc_rescan` has to be frozen.
>
> Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code")
> Cc: stable@vger.kernel.org
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> This commit was later reverted:
>
> commit 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843
> Author: Christian Heusel <christian@heusel.eu>
> Date: Mon Feb 24 09:32:59 2025 +0100
>
> Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
>
> This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
>
> This commit was found responsible for issues with SD card recognition,
> as users had to re-insert their cards in the readers and wait for a
> while. As for some people the SD card was involved in the boot process
> it also caused boot failures.
>
> Cc: stable@vger.kernel.org
> Link: https://bbs.archlinux.org/viewtopic.php?id=303321
> Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
> Reported-by: qf <quintafeira@tutanota.com>
> Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
> Signed-off-by: Christian Heusel <christian@heusel.eu>
> Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> The revert commit is in 6.14-rc6 and backported to 6.13.7, 6.12.19 *and*
> 6.1.131.
>
> So I believe it will be fixed with the next upload, but if you can I
> would appreciate if you would test a kernel build with the attached
> pach, to verify it fixes your issue. How you can do that with our
> simple-patching helper is documented at:
> https://kernel-team.pages.debian.net/kernel-handbook/ch-common-tasks.html#id-1.6.6.4
>
> Regards,
> Salvatore
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.kernel
csiph-web