Groups > linux.debian.kernel > #85226 > unrolled thread

Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set

Started by	Madis Janson <madis@cyber.ee>
First post	2025-01-19 23:20 +0100
Last post	2025-02-09 10:10 +0100
Articles	2 — 2 participants

Back to article view | Back to linux.debian.kernel

  Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set Madis Janson <madis@cyber.ee> - 2025-01-19 23:20 +0100
    Bug#1093557: marked as done (linux-image-6.13-rc6-arm64: No HDMI  output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set) "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-02-09 10:10 +0100

#85226 — Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set

From	Madis Janson <madis@cyber.ee>
Date	2025-01-19 23:20 +0100
Subject	Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set
Message-ID	<K6LO9-agXJ-5@gated-at.bofh.it>

Package: src:linux
Version: 6.13~rc6-1~exp1
Severity: normal

Dear Maintainer,

I installed Debian on Odroid-N2 (using https://github.com/mth/u-boot-odroid-m2 by myself so UEFI provided 6.13-rc7 device tree for the board).
Otherwise it seems to work fine with the 6.13~rc6-1~exp1 kernel, but HDMI output is not working due ROCKCHIP_DW_HDMI_QP being not set in the Debian packages build configuration.

I tried also with 6.13-rc7 kernel compiled by myself, where I took the Debian kernel configuration from /boot/config-6.13-rc6-arm64 and enabled ROCKCHIP_DW_HDMI_QP.
After booting this compiled kernel with video=1920x1080@60 kernel parameter the HDMI output works (even Sway started up, so it seems good for Wayland).

It would be useful to enable the ROCKCHIP_DW_HDMI_QP in Debian ARM64 packages kernel configuration to make HDMI work on various RK3588(s) based single board computers.

-- Package-specific info:
** Version:
Linux version 6.13-rc6-arm64 (debian-kernel@lists.debian.org) (aarch64-linux-gnu-gcc-14 (Debian 14.2.0-12) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20250108) #1 SMP Debian 6.13~rc6-1~exp1 (2025-01-12)

** Command line:
BOOT_IMAGE=/vmlinuz-6.13-rc6-arm64 root=UUID=dcf36c6d-8284-47a4-91a6-24b2a2e1e5b6 ro video=1920x1080@60

** Tainted: W (512)
 * kernel issued warning

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
Device Tree model: Hardkernel ODROID-M2

** Loaded modules:
binfmt_misc
realtek
dwmac_rk
rockchipdrm
stmmac_platform
hantro_vpu
stmmac
nls_ascii
dw_mipi_dsi
nls_cp437
dw_hdmi
crct10dif_ce
pcs_xpcs
vfat
polyval_ce
xhci_plat_hcd
v4l2_jpeg
polyval_generic
fat
phylink
v4l2_vp9
cec
xhci_hcd
rockchip_rga
ghash_ce
v4l2_h264
sdhci_of_dwcmshc
gf128mul
rockchip_saradc
videobuf2_dma_contig
mdio_devres
evdev
snd_soc_audio_graph_card
rc_core
v4l2_mem2mem
of_mdio
industrialio_triggered_buffer
optee
sdhci_pltfm
snd_soc_simple_card_utils
videobuf2_dma_sg
dw_mmc_rockchip
sha2_ce
snd_soc_es8316
snd_soc_rockchip_i2s_tdm
kfifo_buf
sha256_arm64
fusb302
fixed_phy
videobuf2_memops
sha1_ce
pwm_fan
ledtrig_default_on
dwc3
leds_gpio
snd_soc_core
tee
display_connector
industrialio
videobuf2_v4l2
sdhci
analogix_dp
dw_mmc_pltfm
fwnode_mdio
ohci_platform
rk805_pwrkey
tcpm
rockchip_thermal
nvmem_rockchip_otp
dw_wdt
libphy
snd_compress
drm_display_helper
videodev
dw_mmc
ohci_hcd
panthor
rockchip_dfi
cqhci
snd_pcm_dmaengine
ehci_platform
udc_core
snd_pcm
ehci_hcd
drm_gpuvm
drm_client_lib
drm_exec
drm_dma_helper
videobuf2_common
usbcore
snd_timer
mc
gpu_sched
snd
drm_shmem_helper
drm_kms_helper
soundcore
ulpi
cpufreq_dt
drm
efi_pstore
configfs
nfnetlink
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
nvme
nvme_core
nvme_auth
dm_crypt
dm_mod
rk808_regulator
fan53555
phy_rockchip_usbdp
typec
pl330
gpio_rockchip
phy_rockchip_samsung_hdptx
fixed
phy_rockchip_naneng_combphy
spi_rockchip
i2c_rk3x
phy_rockchip_inno_usb2
pwm_rockchip
usb_common
aes_neon_bs
aes_neon_blk
aes_ce_blk
aes_ce_cipher

** PCI devices:
0004:40:00.0 PCI bridge [0604]: Rockchip Electronics Co., Ltd RK3588 [1d87:3588] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 74
	Bus: primary=40, secondary=41, subordinate=41, sec-latency=0
	I/O behind bridge: [disabled] [16-bit]
	Memory behind bridge: f4200000-f42fffff [size=1M] [32-bit]
	Prefetchable memory behind bridge: [disabled] [64-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	Expansion ROM at f4300000 [virtual] [disabled] [size=64K]
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=16/32 Maskable- 64bit+
		Address: 00000000fe650040  Data: 0000
	Capabilities: [70] Express (v2) Root Port (Slot-), IntMsgNum 8
		DevCap:	MaxPayload 256 bytes, PhantFunc 0
			ExtTag- RBE+ TEE-IO-
		DevCtl:	CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <16us
			ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
		LnkCtl:	ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
		LnkSta:	Speed 5GT/s, Width x1
			TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		RootCap: CRSVisible+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP+ LTR+
			 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
			 AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
			 AtomicOpsCtl: ReqEn- EgressBlck-
			 IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
			 10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
		LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [b0] MSI-X: Enable- Count=128 Masked-
		Vector table: BAR=4 offset=00020000
		PBA: BAR=4 offset=00028000
	Capabilities: [100 v2] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
			ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
			ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
			ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+
		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
		RootCmd: CERptEn+ NFERptEn+ FERptEn+
		RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
			 FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 9
		ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
	Capabilities: [148 v1] Secondary PCI Express
		LnkCtl3: LnkEquIntrruptEn- PerformEqu-
		LaneErrStat: 0
	Capabilities: [180 v1] L1 PM Substates
		L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
			  PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
			   T_CommonMode=10us LTR1.2_Threshold=26016ns
		L1SubCtl2: T_PwrOn=10us
	Capabilities: [190 v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?>
	Kernel driver in use: pcieport

0004:41:00.0 Non-Volatile memory controller [0108]: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [1cc1:8201] (rev 03) (prog-if 02 [NVM Express])
	Subsystem: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [1cc1:8201]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 73
	Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] Express (v2) Endpoint, IntMsgNum 0
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO-
		DevCtl:	CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <8us
			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
		LnkCtl:	ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s (downgraded), Width x1 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- TPHComp- ExtTPHComp-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
			 AtomicOpsCtl: ReqEn-
			 IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
			 10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
		LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00002100
	Capabilities: [100 v2] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
			ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
			ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
			ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
			PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+
		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
	Capabilities: [158 v1] Secondary PCI Express
		LnkCtl3: LnkEquIntrruptEn- PerformEqu-
		LaneErrStat: 0
	Capabilities: [178 v1] Latency Tolerance Reporting
		Max snoop latency: 0ns
		Max no snoop latency: 0ns
	Capabilities: [180 v1] L1 PM Substates
		L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
			  PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
			   T_CommonMode=0us LTR1.2_Threshold=26016ns
		L1SubCtl2: T_PwrOn=10us
	Kernel driver in use: nvme
	Kernel modules: nvme


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub


-- System Information:
Debian Release: trixie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: arm64 (aarch64)

Kernel: Linux 6.13-rc6-arm64 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.13-rc6-arm64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.145
ii  kmod                                    33+20240816-2
ii  linux-base                              4.11

Versions of packages linux-image-6.13-rc6-arm64 recommends:
ii  apparmor  3.1.7-1+b3

Versions of packages linux-image-6.13-rc6-arm64 suggests:
pn  debian-kernel-handbook  <none>
ii  firmware-linux-free     20241210-1
pn  linux-doc-6.13          <none>

Versions of packages linux-image-6.13-rc6-arm64 is related to:
ii  firmware-amd-graphics      20241210-1
pn  firmware-atheros           <none>
pn  firmware-bnx2              <none>
pn  firmware-bnx2x             <none>
pn  firmware-brcm80211         <none>
pn  firmware-cavium            <none>
pn  firmware-cirrus            <none>
pn  firmware-intel-graphics    <none>
pn  firmware-intel-misc        <none>
pn  firmware-intel-sound       <none>
pn  firmware-ipw2x00           <none>
pn  firmware-ivtv              <none>
pn  firmware-iwlwifi           <none>
pn  firmware-libertas          <none>
pn  firmware-marvell-prestera  <none>
pn  firmware-mediatek          <none>
ii  firmware-misc-nonfree      20241210-1
pn  firmware-myricom           <none>
pn  firmware-netronome         <none>
pn  firmware-netxen            <none>
pn  firmware-nvidia-graphics   <none>
pn  firmware-qcom-soc          <none>
pn  firmware-qlogic            <none>
pn  firmware-realtek           <none>
pn  firmware-samsung           <none>
pn  firmware-siano             <none>
pn  firmware-ti-connectivity   <none>
pn  xen-hypervisor             <none>

-- no debconf information

[toc] | [next] | [standalone]

#85443 — Bug#1093557: marked as done (linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set)

From	"Debian Bug Tracking System" <owner@bugs.debian.org>
Date	2025-02-09 10:10 +0100
Subject	Bug#1093557: marked as done (linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set)
Message-ID	<Kebub-fv19-35@gated-at.bofh.it>
In reply to	#85226

[Multipart message — attachments visible in raw view] — view raw

Your message dated Sun, 09 Feb 2025 09:02:07 +0000
with message-id <E1th3CZ-00AaJY-Vw@fasolo.debian.org>
and subject line Bug#1093557: fixed in linux 6.13.2-1~exp1
has caused the Debian Bug report #1093557,
regarding linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1093557: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1093557
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

[toc] | [prev] | [standalone]

csiph-web

Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set

Contents

#85226 — Bug#1093557: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set

#85443 — Bug#1093557: marked as done (linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due CONFIG_ROCKCHIP_DW_HDMI_QP not set)