Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.kernel > #81269 > unrolled thread

Bug#1026906: /lib/firmware/iwlwifi-cc-a0-72.ucode: "Microcode SW error detected" after idle for a while and breaks wifi

Back to article view | Back to linux.debian.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Bug#1026906: /lib/firmware/iwlwifi-cc-a0-72.ucode: "Microcode SW error detected" after idle for a while and breaks wifi Diederik de Haas <didi.debian@cknow.org> - 2023-12-20 00:10 +0100
    Bug#1026906: /lib/firmware/iwlwifi-cc-a0-72.ucode: "Microcode SW error detected" after idle for a while and breaks wifi Yuxuan Wang <fishywang@gmail.com> - 2023-12-20 00:30 +0100

#81269 — Bug#1026906: /lib/firmware/iwlwifi-cc-a0-72.ucode: "Microcode SW error detected" after idle for a while and breaks wifi

[Multipart message — attachments visible in raw view] — view raw

On Friday, 23 December 2022 18:40:32 CET Yuxuan Wang wrote:
> Package: firmware-iwlwifi
> Version: 20221109-4
> 
> With firmware iwlwifi-cc-a0-72.ucode, the wifi chip would throw "Microcode
> SW error detected" after the system is idle for a while. After wakig up the
> system, the wifi would appears to be connected (in NetworkManager), but
> pinging the router will give "Destination Host Unreachable", and I have to
> turn wifi off and one again in NetworkManager to fix it.
> 
> This is the kernel log when the error happens:
> ...
> (delay=0ms). Dec 20 16:00:14 perch kernel: ieee80211 phy0: Hardware restart
> was requested
> 
> The hardware info according to `lspci -nn -d ::280` is:
> 
>     3b:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200
> [8086:2723] (rev 1a)
> 
> I tried to downgrade it, via:
> 
>     mv /lib/firmware/iwlwifi-cc-a0-72.ucode
> /lib/firmware/iwlwifi-cc-a0-72.ucode.backup
> 
> And then reload the kernel models, which loaded 71 instead, but that still
> has a similar issue: instead of "Destination Host Unreachable", pinging the
> router gives me super high latency (in seconds instead of milliseconds) and
> the network is almost unusable, and I have to turn wifi off and on again in
> NetworkManager to fix it. The kernel log for 71 is:
> 
> I have to downgrade again (from 71 to 63, there's no version in between) to
> fix the issue.

So to summarize: It works with 63, but it fails with 71 or 72? And in order to 
make it work, you have to (actively) remove the 71 and 72 versions?

[toc] | [next] | [standalone]

#81270

On Tue, Dec 19, 2023 at 2:47 PM Diederik de Haas <didi.debian@cknow.org> wrote:
>
> On Friday, 23 December 2022 18:40:32 CET Yuxuan Wang wrote:
> > Package: firmware-iwlwifi
> > Version: 20221109-4
> >
> > With firmware iwlwifi-cc-a0-72.ucode, the wifi chip would throw "Microcode
> > SW error detected" after the system is idle for a while. After wakig up the
> > system, the wifi would appears to be connected (in NetworkManager), but
> > pinging the router will give "Destination Host Unreachable", and I have to
> > turn wifi off and one again in NetworkManager to fix it.
> >
> > This is the kernel log when the error happens:
> > ...
> > (delay=0ms). Dec 20 16:00:14 perch kernel: ieee80211 phy0: Hardware restart
> > was requested
> >
> > The hardware info according to `lspci -nn -d ::280` is:
> >
> >     3b:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200
> > [8086:2723] (rev 1a)
> >
> > I tried to downgrade it, via:
> >
> >     mv /lib/firmware/iwlwifi-cc-a0-72.ucode
> > /lib/firmware/iwlwifi-cc-a0-72.ucode.backup
> >
> > And then reload the kernel models, which loaded 71 instead, but that still
> > has a similar issue: instead of "Destination Host Unreachable", pinging the
> > router gives me super high latency (in seconds instead of milliseconds) and
> > the network is almost unusable, and I have to turn wifi off and on again in
> > NetworkManager to fix it. The kernel log for 71 is:
> >
> > I have to downgrade again (from 71 to 63, there's no version in between) to
> > fix the issue.
>
> So to summarize: It works with 63, but it fails with 71 or 72? And in order to
> make it work, you have to (actively) remove the 71 and 72 versions?

Correct.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.debian.kernel

csiph-web