Groups > linux.debian.kernel > #76543 > unrolled thread

Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

Started by	Dan Coleman <autopr3z@protonmail.com>
First post	2022-10-19 13:40 +0200
Last post	2022-10-27 08:30 +0200
Articles	18 — 13 participants

Back to article view | Back to linux.debian.kernel

  Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Dan Coleman <autopr3z@protonmail.com> - 2022-10-19 13:40 +0200
    Bug#1022042: (No Subject) Dan Coleman <autopr3z@protonmail.com> - 2022-10-19 14:30 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Arndt Kaiser <aka@mrwash.de> - 2022-10-19 14:40 +0200
    Bug#1022042: #1022042 linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Lloyd Jacobs <montanalestes@gmail.com> - 2022-10-19 16:00 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Henrik Ahlgren <pablo@seestieto.com> - 2022-10-19 22:20 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics amiguetemelide@gmail.com - 2022-10-19 22:30 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Ian Zurutuza <ian.zurutuza@gmail.com> - 2022-10-19 23:10 +0200
    Bug#1022042: Confirm issue Roland Gruber <post@rolandgruber.de> - 2022-10-21 08:00 +0200
    Bug#1022042: linux-image-5.10.0-19-amd64: amd computers with integrated graphics (ryzen 5 3400G) don't boot with this kernel version George Ramos <mreg@duck.com> - 2022-10-21 22:10 +0200
    Bug#1022042: kernel 5.10.149-2 does not help Andreas Wirooks <andreas.wirooks@web.de> - 2022-10-23 09:30 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics inasprecali <inasprecali@disroot.org> - 2022-10-23 12:10 +0200
    Bug#1022042: kernel 5.10.149-2 does not help Diederik de Haas <didi.debian@cknow.org> - 2022-10-23 14:40 +0200
      Bug#1022042: kernel 5.10.149-2 does not help Andreas Wirooks <andreas.wirooks@web.de> - 2022-10-23 19:10 +0200
    Bug#1022042: kernel 5.10.149-2 does not help inasprecali <inasprecali@disroot.org> - 2022-10-23 15:20 +0200
    Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics inasprecali <inasprecali@disroot.org> - 2022-10-23 15:20 +0200
      Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics Diederik de Haas <didi.debian@cknow.org> - 2022-10-23 16:00 +0200
        Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics <inasprecali@disroot.org> - 2022-10-23 17:50 +0200
    Bug#1022042: marked as done (linux-image-amd64: linux-image-5.10.0-19-amd64  fails to boot on machines with AMD integrated graphics) "Debian Bug Tracking System" <owner@bugs.debian.org> - 2022-10-27 08:30 +0200

#76543 — Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

From	Dan Coleman <autopr3z@protonmail.com>
Date	2022-10-19 13:40 +0200
Subject	Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics
Message-ID	<FifAt-fho2-9@gated-at.bofh.it>

Package: linux-image-amd64
Version: 5.10.149-1
Severity: important
X-Debbugs-Cc: autopr3z@protonmail.com

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

I upgraded to the latest security kernel on Stable (5.10.0-19). After upgrading, I rebooted.

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

Only thing that works to get 5.10.0-19 booting is to not have integrated AMD graphics. My other nvidia machine upgraded just fine. Disabling modesetting did not resolve the issue.

   * What was the outcome of this action?

Computer gets past GRUB, attempts to boot, and then hangs on a black screen. After about 30 seconds, some error messages are spat out regarding DRM and "flip_done timed out"

   * What outcome did you expect instead?

I expected the machine to boot normally.

*** End of the template - remove these template lines ***


-- System Information:
Debian Release: 11.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-18-amd64 (SMP w/16 CPU threads)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-amd64 depends on:
ii  linux-image-5.10.0-19-amd64  5.10.149-1

linux-image-amd64 recommends no packages.

linux-image-amd64 suggests no packages.

-- no debconf information

[toc] | [next] | [standalone]

#76544 — Bug#1022042: (No Subject)

From	Dan Coleman <autopr3z@protonmail.com>
Date	2022-10-19 14:30 +0200
Subject	Bug#1022042: (No Subject)
Message-ID	<FigmR-fhTl-5@gated-at.bofh.it>
In reply to	#76543

Here is a reddit link with information from another user that is experiencing the same issue. They've reprinted the errors I referred to in the original bug report.

https://www.reddit.com/r/debian/comments/y7t4bv/cant_boot_on_stable_bullseye_after_kernel_update/

[toc] | [prev] | [next] | [standalone]

#76546

From	Arndt Kaiser <aka@mrwash.de>
Date	2022-10-19 14:40 +0200
Message-ID	<Figwx-fhWz-1@gated-at.bofh.it>
In reply to	#76543

Dear Maintainer,

i can confirm the problem.

All of our notebooks with integrated AMD graphics (CPU: AMD Ryzen 7 PRO 
4750U with Radeon Graphics) are affected and don't boot anymore.

During boot the following error-messages appear:

[drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* 
[CRTC:62:crtc-0] flip_done timed out.

[drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* 
[CRTC:62:crtc-0] flip_done timed out.

[drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* 
[PLANE:52:plane-3] flip_done timed out.


5.10.0-18 boots without problems.


Best Regards,

Arndt Kaiser

[toc] | [prev] | [next] | [standalone]

#76556 — Bug#1022042: #1022042 linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

From	Lloyd Jacobs <montanalestes@gmail.com>
Date	2022-10-19 16:00 +0200
Subject	Bug#1022042: #1022042 linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics
Message-ID	<FihLX-fiCv-1@gated-at.bofh.it>
In reply to	#76543

[Multipart message — attachments visible in raw view] — view raw

Same problem here, after update my laptop failed to boot after grub. 
Reverted to 5.10.0-18 which works.

Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X415DAP_M415DA v: 1.0

serial:

Mobo: ASUSTeK model: X415DAP v: 1.0 serial: UEFI: American Megatrends

v: X415DAP.308 date: 04/15/2022

AMD Ryzen 3 3250U with Radeon Graphics

[toc] | [prev] | [next] | [standalone]

#76571

From	Henrik Ahlgren <pablo@seestieto.com>
Date	2022-10-19 22:20 +0200
Message-ID	<FinHH-fml2-1@gated-at.bofh.it>
In reply to	#76543

Same thing here with an AMD Ryzen 5 PRO 3400G system.

Also gnome-shell have been complaining about "Failed to set CRTC gamma:
drmModeCrtcSetGamma on CRTC 62 failed: Permission denied" for some time. I
don't know what is CRTC 62, but clearly it is related.

[toc] | [prev] | [next] | [standalone]

#76572

From	amiguetemelide@gmail.com
Date	2022-10-19 22:30 +0200
Message-ID	<FinRn-fmoc-3@gated-at.bofh.it>
In reply to	#76543

I can confirm too
AMD® Ryzen 7 4700u with radeon graphics × 8 
AMD® Renoir

[toc] | [prev] | [next] | [standalone]

#76573

From	Ian Zurutuza <ian.zurutuza@gmail.com>
Date	2022-10-19 23:10 +0200
Message-ID	<Fiou5-fmQk-9@gated-at.bofh.it>
In reply to	#76543

Failed to boot kernel 5.10.0-19 with:
CPU: AMD Ryzen 7 3800X (16) (no integrated graphics)
GPU: AMD ATI Radeon Vega Frontier Edition

No issues with kernel 5.10.0-18.

---
Ian

[toc] | [prev] | [next] | [standalone]

#76602 — Bug#1022042: Confirm issue

From	Roland Gruber <post@rolandgruber.de>
Date	2022-10-21 08:00 +0200
Subject	Bug#1022042: Confirm issue
Message-ID	<FiTex-fFfq-3@gated-at.bofh.it>
In reply to	#76543

Hi,

I have the same issue, 5.10.0-18 works, 5.10.0-19 crashes the system 
after disk decryption.

AMD Ryzen 7 5700U

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe 
Dummy Host Bridge
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP 
Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe 
Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP 
Bridge
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP 
Bridge
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP 
Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe 
Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal 
PCIe GPP Bridge to Bus
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal 
PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller 
(rev 51)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge 
(rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 
24: Function 7
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A 
PCI Express Card Reader (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe 
SSD Controller PM9A1/980PRO
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. 
[AMD/ATI] Lucienne (rev c1)
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637
05:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 
17h (Models 10h-1fh) Platform Security Processor
05:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1
05:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1
05:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] 
Raven/Raven2/FireFlight/Renoir Audio Processor (rev 01)
05:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h 
(Models 10h-1fh) HD Audio Controller
06:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA 
Controller [AHCI mode] (rev 81)
06:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA 
Controller [AHCI mode] (rev 81)


Best regards

Roland

[toc] | [prev] | [next] | [standalone]

#76628 — Bug#1022042: linux-image-5.10.0-19-amd64: amd computers with integrated graphics (ryzen 5 3400G) don't boot with this kernel version

From	George Ramos <mreg@duck.com>
Date	2022-10-21 22:10 +0200
Subject	Bug#1022042: linux-image-5.10.0-19-amd64: amd computers with integrated graphics (ryzen 5 3400G) don't boot with this kernel version
Message-ID	<Fj6v7-fNbV-3@gated-at.bofh.it>
In reply to	#76543

Package: src:linux
Version: 5.10.149-1
Followup-For: Bug #1022042
X-Debbugs-Cc: mreg@duck.com

Dear Maintainer,

I just updated to the new kernel linux-image-5.10.0-19-amd64 (ver 5.10.149-1)
And when the system was trying to boot(but never did), I just got this
messages:

[14.020140] [drm:drm_atomic_helper_wait_for_flip_done [drm_dkms_helper]]
*ERROR* [CRTC:62:crtc-0] flip_done timed out
[24.260069] [drm:drm_atomic_helper_wait_for_flip_done [drm_dkms_helper]]
*ERROR* [CRTC:65:crtc-1] flip_done timed out
[34.500079] [drm:drm_atomic_helper_wait_for_dependencies [drm_dkms_helper]]
*ERROR* [CRTC:62:crtc-0] flip_done timed out
[44.740026] [drm:drm_atomic_helper_wait_for_dependencies [drm_dkms_helper]]
*ERROR* [CRTC:62:crtc-1] flip_done timed out
[54.980073] [drm:drm_atomic_helper_wait_for_dependencies [drm_dkms_helper]]
*ERROR* [PLANE:48:plane-2] flip_done timed out
[65.220054] [drm:drm_atomic_helper_wait_for_dependencies [drm_dkms_helper]]
*ERROR* [PLANE:52:plane-3] flip_done timed out
[75.460064] [drm:drm_atomic_helper_wait_for_flip_done [drm_dkms_helper]]
*ERROR* [CRTC:62:crtc-0] flip_done timed out
[85.700050] [drm:drm_atomic_helper_wait_for_flip_done [drm_dkms_helper]]
*ERROR* [CRTC:65:crtc-1] flip_done timed out
/dev/nvme0n1p2: clean, 354739/1831424 files, 4384360/7324160 blocks

I restarted the system twice later but got nothing more than a black screen.

I backed off to the previous kernel linux-image-5.10.0-17-amd64 (5.10.136-1)

The system boots again with no issues, I'll keep using this kernel version
(linux-image-5.10.0-17-amd64) until a new one
gets released and try it.

Thanks for your great work.




-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: BIOSTAR Group
product_name: A32M2
product_version: 
chassis_vendor: BIOSTAR Group
chassis_version: 
bios_vendor: American Megatrends Inc.
bios_version: 5.14
board_vendor: BIOSTAR Group
board_name: A32M2
board_version: 

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex [1022:15d0]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex [1022:15d0]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU [1022:15d1]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU [1022:15d1]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 25
	Capabilities: <access denied>

00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 0

00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 26
	IOMMU group: 1
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcc00000-fcdfffff [size=2M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:01.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 27
	IOMMU group: 2
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: fcf00000-fcffffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 3

00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A [1022:15db] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	IOMMU group: 4
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 0000e000-0000efff [size=4K]
	Memory behind bridge: fc800000-fcbfffff [size=4M]
	Prefetchable memory behind bridge: 00000000e0000000-00000000f01fffff [size=258M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:08.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B [1022:15dc] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	IOMMU group: 5
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: fce00000-fcefffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
	Subsystem: Biostar Microtech Int'l Corp FCH SMBus Controller [1565:370b]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 6
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
	Subsystem: Biostar Microtech Int'l Corp FCH LPC Bridge [1565:370b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	IOMMU group: 6

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0 [1022:15e8]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1 [1022:15e9]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2 [1022:15ea]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3 [1022:15eb]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7
	Kernel driver in use: k10temp
	Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4 [1022:15ec]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5 [1022:15ed]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6 [1022:15ee]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7 [1022:15ef]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	IOMMU group: 7

01:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43bc] (rev 02) (prog-if 30 [XHCI])
	Subsystem: ASMedia Technology Inc. Device [1b21:1142]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	IOMMU group: 8
	Region 0: Memory at fcda0000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

01:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b8] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASMedia Technology Inc. Device [1b21:1062]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 39
	IOMMU group: 8
	Region 5: Memory at fcd80000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at fcd00000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

01:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b3] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 30
	IOMMU group: 8
	Bus: primary=01, secondary=02, subordinate=06, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcc00000-fccfffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	IOMMU group: 8
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff [size=4K]
	Memory behind bridge: fcc00000-fccfffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 34
	IOMMU group: 8
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: [disabled]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 35
	IOMMU group: 8
	Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: [disabled]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

02:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 37
	IOMMU group: 8
	Bus: primary=02, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: [disabled]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
	Subsystem: Biostar Microtech Int'l Corp RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1565:2312]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	IOMMU group: 8
	Region 0: I/O ports at f000 [size=256]
	Region 2: Memory at fcc04000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at fcc00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

07:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5765] (rev 01) (prog-if 02 [NVM Express])
	Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:5765]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 69
	NUMA node: 0
	IOMMU group: 9
	Region 0: Memory at fcf00000 (64-bit, non-prefetchable) [size=16K]
	Region 5: Memory at fcf04000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: nvme
	Kernel modules: nvme

08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c8) (prog-if 00 [VGA controller])
	Subsystem: Biostar Microtech Int'l Corp Picasso [1565:170b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 60
	IOMMU group: 10
	Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at f0000000 (64-bit, prefetchable) [size=2M]
	Region 4: I/O ports at e000 [size=256]
	Region 5: Memory at fcb00000 (32-bit, non-prefetchable) [size=512K]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu

08:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de]
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 83
	IOMMU group: 11
	Region 0: Memory at fcb88000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

08:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 40
	IOMMU group: 11
	Region 2: Memory at fca00000 (32-bit, non-prefetchable) [size=1M]
	Region 5: Memory at fcb8c000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ccp
	Kernel modules: ccp

08:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e0] (prog-if 30 [XHCI])
	Subsystem: Biostar Microtech Int'l Corp Raven USB 3.1 [1565:370b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 51
	IOMMU group: 11
	Region 0: Memory at fc900000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

08:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e1] (prog-if 30 [XHCI])
	Subsystem: Biostar Microtech Int'l Corp Raven USB 3.1 [1565:370b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 60
	IOMMU group: 11
	Region 0: Memory at fc800000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

08:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3]
	Subsystem: Biostar Microtech Int'l Corp Family 17h (Models 10h-1fh) HD Audio Controller [1565:824d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 84
	IOMMU group: 11
	Region 0: Memory at fcb80000 (32-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

09:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61) (prog-if 01 [AHCI 1.0])
	Subsystem: Biostar Microtech Int'l Corp FCH SATA Controller [AHCI mode] [1565:550d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 41
	IOMMU group: 12
	Region 5: Memory at fce00000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci


** USB devices:
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 046d:082c Logitech, Inc. HD Webcam C615
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 11.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-17-amd64 (SMP w/8 CPU threads)
Locale: LANG=es_NI.UTF-8, LC_CTYPE=es_NI.UTF-8 (charmap=UTF-8), LANGUAGE=es_NI:es
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-19-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-19-amd64 recommends:
ii  apparmor             2.13.6-10
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-19-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.06-3~deb11u2
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-19-amd64 is related to:
ii  firmware-amd-graphics     20210315-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20210315-3
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

[toc] | [prev] | [next] | [standalone]

#76645 — Bug#1022042: kernel 5.10.149-2 does not help

From	Andreas Wirooks <andreas.wirooks@web.de>
Date	2022-10-23 09:30 +0200
Subject	Bug#1022042: kernel 5.10.149-2 does not help
Message-ID	<FjDAJ-g8mY-1@gated-at.bofh.it>
In reply to	#76543

The new Debian 11/bullseye kernel 5.10.149-2 does not help on my setup.
Still a black screen and nothing is logged.
Also in rescue mode without "quiet".

My GPU is:
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Tobago HDMI
Audio [Radeon R7 360 / R9 360 OEM]

The GPU is running on an Intel X58 board with Intel Xeon W3530 CPU and
classic BIOS.

Kernel parameters are:
radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1
amdgpu.cik_support=1 amdgpu.gpu_recovery=1

My setup works flawless with linux-image-5.10.0-18-amd64.

Kind regards,
Andreas

[toc] | [prev] | [next] | [standalone]

#76649

From	inasprecali <inasprecali@disroot.org>
Date	2022-10-23 12:10 +0200
Message-ID	<FjG5z-g9Us-1@gated-at.bofh.it>
In reply to	#76543

After updating to the latest version (5.10.149-2), my system
running an AMD GPU and CPU still does not boot.  I am unable to
retrieve any logs from the systemd journal.

CPU: AMD FX-8350
GPU: AMD R9 270X (Southern Islands Family)

Kernel command line parameters:
GRUB_CMDLINE_LINUX="radeon.si_support=0 amdgpu.si_support=1"

5.10.0-19 fails to boot, while 5.10.0-18 does.

Best regards.

--
inasprecali

[toc] | [prev] | [next] | [standalone]

#76656 — Bug#1022042: kernel 5.10.149-2 does not help

From	Diederik de Haas <didi.debian@cknow.org>
Date	2022-10-23 14:40 +0200
Subject	Bug#1022042: kernel 5.10.149-2 does not help
Message-ID	<FjIqJ-gba8-1@gated-at.bofh.it>
In reply to	#76543

[Multipart message — attachments visible in raw view] — view raw

On zondag 23 oktober 2022 14:10:11 CEST Andreas Wirooks wrote:
> > You both have kernel parameters like these. Can you explain why?
> > I have an AMD GPU on a machine and I have never set parameters like these.
> 
> These are parameters for Southern Islands (si) and Sea Islands (cik) AMD
> GPUs:

I see you're already 'in' https://gitlab.freedesktop.org/drm/amd/-/issues/2216 
and that seems like an important distinction to mention (to me).
All the other cases for where this issue was fixed, seem to have (much) newer 
generation of GPUs.

[toc] | [prev] | [next] | [standalone]

#76665 — Bug#1022042: kernel 5.10.149-2 does not help

From	Andreas Wirooks <andreas.wirooks@web.de>
Date	2022-10-23 19:10 +0200
Subject	Bug#1022042: kernel 5.10.149-2 does not help
Message-ID	<FjME1-ge2E-1@gated-at.bofh.it>
In reply to	#76656

Am 23.10.22 um 14:27 schrieb Diederik de Haas:
> On zondag 23 oktober 2022 14:10:11 CEST Andreas Wirooks wrote:
>>> You both have kernel parameters like these. Can you explain why?
>>> I have an AMD GPU on a machine and I have never set parameters like these.
>> These are parameters for Southern Islands (si) and Sea Islands (cik) AMD
>> GPUs:
> I see you're already 'in' https://gitlab.freedesktop.org/drm/amd/-/issues/2216
> and that seems like an important distinction to mention (to me).
> All the other cases for where this issue was fixed, seem to have (much) newer
> generation of GPUs.

I will write an update in the drm issue too.

I tested the old radeon driver by removing all si/cki options with
kernel 5.10.149-2 and it boots ok and uses drm 2 instead drm 3.

But of course i added these options again and rebooted with 5.10.140-1
because of Vulkan support in the amdgpu driver using drm 3.

The debian 11/bullseye backport kernel 5.19.11-1~bpo11+1 boots ok with
the amdgpu driver too using drm 3.

[toc] | [prev] | [next] | [standalone]

#76657 — Bug#1022042: kernel 5.10.149-2 does not help

From	inasprecali <inasprecali@disroot.org>
Date	2022-10-23 15:20 +0200
Subject	Bug#1022042: kernel 5.10.149-2 does not help
Message-ID	<FjJ3r-gbEz-1@gated-at.bofh.it>
In reply to	#76543

On Sun, 23 Oct 2022 13:43:30 +0200 Diederik de Haas
<didi.debian@cknow.org> wrote:
> Andreas and inasprecali,
> 
> On zondag 23 oktober 2022 09:17:44 CEST Andreas Wirooks wrote:
> > Kernel parameters are:
> > radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1
> > amdgpu.cik_support=1 amdgpu.gpu_recovery=1
> 
> You both have kernel parameters like these. Can you explain why?
> I have an AMD GPU on a machine and I have never set parameters
like these.

In my case, it's because, without command line parameters, the
kernel will select the "radeon" driver, while I want to use the
"amdgpu" driver instead.

The options "radeon.si_support=0 amdgpu.si_support=1" disable
radeon support and enable amdgpu support respectively.

5.10.0-18 and earlier have always worked as expected.  5.10.0-19,
even with the very latest stable update, fails to boot.

Best regards.

--
inasprecali

[toc] | [prev] | [next] | [standalone]

#76658

From	inasprecali <inasprecali@disroot.org>
Date	2022-10-23 15:20 +0200
Message-ID	<FjJ3u-gbEz-39@gated-at.bofh.it>
In reply to	#76543

On Sun, 23 Oct 2022 13:40:26 +0200 Diederik de Haas
<didi.debian@cknow.org> wrote:
> Does it really not boot? Or does the screen not work properly?
> 
> The cases in this bug report all boot AFAIK, it's just that the
screen does 
> not work properly, but people were able to SSH into the machine.
> If your system actually does not boot, then I'm inclined to
think that that is 
> a different problem.

It does not boot at all, I'm unable to SSH into it.  It's not
merely that the display does not work.

At the moment, I'm unable to provide additional information, but
I'll try looking into it as soon as possible.

Best regards

--
inasprecali

[toc] | [prev] | [next] | [standalone]

#76660

From	Diederik de Haas <didi.debian@cknow.org>
Date	2022-10-23 16:00 +0200
Message-ID	<FjJGa-gbW8-41@gated-at.bofh.it>
In reply to	#76658

[Multipart message — attachments visible in raw view] — view raw

On Sunday, 23 October 2022 15:15:36 CEST inasprecali wrote:
> It does not boot at all, I'm unable to SSH into it.  It's not
> merely that the display does not work.

Then I'm inclined to think this *is* a separate issue, which is due to the 
upgrade to -19, but that you happen to have an AMD GPU is 'not' relevant.

On Sunday, 23 October 2022 15:18:03 CEST inasprecali wrote:
> In my case, it's because, without command line parameters, the
> kernel will select the "radeon" driver, while I want to use the
> "amdgpu" driver instead.
> 
> The options "radeon.si_support=0 amdgpu.si_support=1" disable
> radeon support and enable amdgpu support respectively.

I realize it's not what you want, but may result in an useful extra data point 
if you (for this test) switch those parameters to enable radeon support and 
disable amdgpu support. Can you try that?

If that test does not make a difference, then I'm quite sure it's a separate 
issue and it would be best to open a new bug report for that.

[toc] | [prev] | [next] | [standalone]

#76662

From	<inasprecali@disroot.org>
Date	2022-10-23 17:50 +0200
Message-ID	<FjLoB-gd8e-3@gated-at.bofh.it>
In reply to	#76660

Diederik de Haas <didi.debian@cknow.org> writes:
> Then I'm inclined to think this *is* a separate issue, which is
> due to the upgrade to -19, but that you happen to have an AMD
> GPU is 'not' relevant.

> I realize it's not what you want, but may result in an useful
> extra data point if you (for this test) switch those parameters
> to enable radeon support and disable amdgpu support. Can you try
> that?
>
> If that test does not make a difference, then I'm quite sure
> it's a separate issue and it would be best to open a new bug
> report for that.

[toc] | [prev] | [next] | [standalone]

#76705 — Bug#1022042: marked as done (linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics)

From	"Debian Bug Tracking System" <owner@bugs.debian.org>
Date	2022-10-27 08:30 +0200
Subject	Bug#1022042: marked as done (linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics)
Message-ID	<Fl4yR-h1F6-13@gated-at.bofh.it>
In reply to	#76543

[Multipart message — attachments visible in raw view] — view raw

Your message dated Thu, 27 Oct 2022 06:17:10 +0000
with message-id <E1onwCU-000My5-8G@fasolo.debian.org>
and subject line Bug#1022025: fixed in linux 5.10.149-2
has caused the Debian Bug report #1022025,
regarding linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1022025: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1022025
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

[toc] | [prev] | [standalone]

csiph-web

Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

Contents

#76543 — Bug#1022042: linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

#76544 — Bug#1022042: (No Subject)

#76546

#76556 — Bug#1022042: #1022042 linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics

#76571

#76572

#76573

#76602 — Bug#1022042: Confirm issue

#76628 — Bug#1022042: linux-image-5.10.0-19-amd64: amd computers with integrated graphics (ryzen 5 3400G) don't boot with this kernel version

#76645 — Bug#1022042: kernel 5.10.149-2 does not help

#76649

#76656 — Bug#1022042: kernel 5.10.149-2 does not help

#76665 — Bug#1022042: kernel 5.10.149-2 does not help

#76657 — Bug#1022042: kernel 5.10.149-2 does not help

#76658

#76660

#76662

#76705 — Bug#1022042: marked as done (linux-image-amd64: linux-image-5.10.0-19-amd64 fails to boot on machines with AMD integrated graphics)