Bug#879102: linux-image-4.9.0-4-686-pae: SCSI timeouts on Dell PowerEdge 2650 with Perc RAID 3/Di (unable to boot)

From	Jerome Warnier <jwarnier@beeznest.org>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#879102: linux-image-4.9.0-4-686-pae: SCSI timeouts on Dell PowerEdge 2650 with Perc RAID 3/Di (unable to boot)
Date	2017-10-19 14:40 +0200
Message-ID	<uCihb-6Ew-7@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Cross-posted to 2 groups.

Show all headers | View raw

Package: src:linux
Version: 4.9.51-1
Severity: important

Dear Maintainer,

On upgrade from Jessie to Etch, the kernel went from 3.16 (3.16.0-0.bpo.4-686-pae currently running) to 4.9 (tested 4.9.0-3-686-pae and 4.9.0-4-686-pae without more success).

When booting from 4.9, the kernel goes into an endless loop, complaining about SCSI abort/timeouts and never actually reaches a usable state.
Rebooting back to the older 3.16 kernel does not show the same issue.

I believe there has been some kernel timeout default changes in the kernel upstream.

Please help.
Thanks.

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information

** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012] (rev 13)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.1 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 Host bridge [0600]: Broadcom CMIC-LE [1166:0000]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:04.0 Unassigned class [ff00]: Dell Embedded Remote Access or ERA/O [1028:000c]
	Subsystem: Dell Embedded Remote Access or ERA/O [1028:000c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at ecf8 [size=8]
	Region 2: I/O ports at ece8 [size=8]
	Expansion ROM at fe000000 [disabled] [size=64K]
	Capabilities: <access denied>

00:04.1 Unassigned class [ff00]: Dell Remote Access Card III [1028:0008]
	Subsystem: Dell Remote Access Card III [1028:0008]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ec80 [size=64]
	Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:04.2 Unassigned class [ff00]: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
	Subsystem: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 7
	Region 0: I/O ports at ecf4 [size=4]
	Capabilities: <access denied>

00:0e.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI [1002:4752] (rev 27) (prog-if 00 [VGA controller])
	Subsystem: Dell Rage XL PCI [1028:0121]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 64 bytes
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at e800 [size=256]
	Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: atyfb

00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
	Subsystem: Broadcom CSB5 South Bridge [1166:0201]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4

00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP])
	Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 08b0 [size=16]
	Kernel driver in use: pata_serverworks
	Kernel modules: pata_serverworks, ata_generic

00:0f.2 USB controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05) (prog-if 10 [OHCI])
	Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (20000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
	Subsystem: Broadcom CSB5 LPC bridge [1166:0230]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

01:08.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
	Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	BIST result: 00
	Region 0: I/O ports at dc00 [disabled] [size=256]
	Region 1: Memory at fcf01000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fce00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

01:08.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
	Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 21
	BIST result: 00
	Region 0: I/O ports at d800 [disabled] [size=256]
	Region 1: Memory at fcf00000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at c0020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

03:06.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15)
	Subsystem: Dell Broadcom BCM5701 1000Base-T [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at fcd10000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

03:08.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15)
	Subsystem: Dell Broadcom BCM5701 1000Base-T [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

04:08.0 PCI bridge [0604]: Intel Corporation 80303 I/O Processor PCI-to-PCI Bridge [8086:0309] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fca00000-fcbfffff
	Prefetchable memory behind bridge: c0100000-c01fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

04:08.1 RAID bus controller [0104]: Dell PowerEdge Expandable RAID Controller 3/Di [1028:000a] (rev 01)
	Subsystem: Dell PERC 3/DiB [Boxster] [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at fc900000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: aacraid
	Kernel modules: aacraid

05:06.0 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5] (rev 01)
	Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 5
	BIST result: 00
	Region 0: I/O ports at ac00 [size=256]
	Region 1: Memory at fcaff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fcb00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: aic7xxx

05:06.1 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5] (rev 01)
	Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 11
	BIST result: 00
	Region 0: I/O ports at a800 [size=256]
	Region 1: Memory at fcafe000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at c0100000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: aic7xxx


** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 9.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-0.bpo.4-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-4-686-pae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-4-686-pae recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-4-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-4-686-pae is related to:
ii  firmware-amd-graphics     20161130-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20161130-3
ii  firmware-misc-nonfree     20161130-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Back to linux.debian.kernel | Previous | Next | Find similar | Unroll thread

Thread

Bug#879102: linux-image-4.9.0-4-686-pae: SCSI timeouts on Dell PowerEdge 2650 with Perc RAID 3/Di (unable to boot) Jerome Warnier <jwarnier@beeznest.org> - 2017-10-19 14:40 +0200

csiph-web