Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.kernel > #58557

Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II

Cross-posted to 2 groups.

Show all headers | View raw

Package: linux-image-4.11.0-0.bpo.1-marvell
Version: 4.11.6-1~bpo9+1: armel

I had Debian Stretch installed on my QNAP TS-219P II and already upgraded to the backports kernel linux-image-4.9.0-0.bpo.3-marvell (4.9.30-2+deb9u2~bpo8+1: armel). Upgrading that to the package specified above yielded a no-boot situation. The full output of the serial console:

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__|  ** LOADER **
 ** MARVELL BOARD: DB-88F6282A-BP LE TS-219P2+ ,PHY=1.8v 

U-Boot 1.1.4 (Jan  3 2012 - 14:49:37) Marvell version: 3.5.3

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CD5C0

Soc: MV88F6282 Rev 1CPU running @ 2000Mhz L2 running @ 500Mhz
SysClock = 500Mhz , TClock = 200Mhz 

DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000   size 256MB 
DRAM CS[1] base 0x10000000   size 256MB 
DRAM Total size 512MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
[16384kB@f8000000] Flash: 16 MB

CPU : Marvell Feroceon (Rev 1)
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: PCI Express Root Complex Interface
PEX interface detected Link X1

Reset IDE: 
Marvell Serial ATA Adapter
Integrated Sata device found

Net:   egiga0 [PRIME]
Hit any key to stop autoboot:  0 
QNAP: Recovery Button pressed: 0
Marvell>> boot
Send Cmd : 0x68 to UART1
## Booting image at 00800000 ...
   Image Name:   kernel 4.11.0-0.bpo.1-marvell
   Created:      2017-07-30  18:55:56 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2076472 Bytes =  2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.



That's it, no further output, no boot. The kernel seems to die early on.

I've observed such early failures on another platform when a "bad" device tree binary was flashed. Is it possible that kernel 4.11 requires a changed dtb, and that was not correctly upgraded?

Back to linux.debian.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-07-30 22:00 +0200
  Bug#870185: Acknowledgement (FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II) "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-07-31 02:50 +0200
  Bug#870185: Acknowledgement (FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II) "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-07-31 12:10 +0200
  Bug#870185: Acknowledgement (FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II) "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-07-31 17:50 +0200
  Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-07-31 18:20 +0200
    Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II Ben Hutchings <ben@decadent.org.uk> - 2017-08-12 23:10 +0200
      Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II Ian Campbell <ijc@debian.org> - 2017-08-13 11:00 +0200
        Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II "Robert Schlabbach" <Robert.Schlabbach@gmx.net> - 2017-08-13 12:10 +0200
          Bug#870185: FATAL: kernel 4.11.0-0.bpo.1-marvell does not boot on QNAP TS-219P II Ian Campbell <ijc@debian.org> - 2017-08-13 12:10 +0200
  Processed: Re: Bug#870185: armel/marvell kernel size owner@bugs.debian.org (Debian Bug Tracking System) - 2017-08-21 18:30 +0200

csiph-web