Bug#760393: Some feedback...

From	Marco Gaiarin <gaio@linux.it>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#760393: Some feedback...
Date	2016-03-31 14:10 +0200
Message-ID	<riJAd-4KT-13@gated-at.bofh.it> (permalink)
References	<ri9Gq-3IQ-7@gated-at.bofh.it> <ribRT-5zX-1@gated-at.bofh.it>
Organization	Casa Gaiarin

Cross-posted to 2 groups.

Show all headers | View raw

> > Machine survive with wheezy kernel for a week, so seems to me that
> > firmware upgrade (and/or wheezy kernel upgrades ;) cure the trouble.

> It'd be appreciated if you can inform the version of running kernel
> and version of upgraded firmware.
> This may be helpful to those having the same hardware.

It is true, i was sure i've just post on that bug the info, but...
clearly no.

The controller was (is):

 Smart Array 641 in Slot 3
   Bus Interface: PCI
   Slot: 3
   Serial Number: P92270P9SSC1BM
   RAID 6 (ADG) Status: Disabled
   Controller Status: OK
   Hardware Revision: B
   Firmware Version: 2.34
   Rebuild Priority: Low
   Expand Priority: Low
   Surface Scan Delay: 15 secs
   Surface Scan Mode: Idle
   Post Prompt Timeout: 0 secs
   Cache Board Present: True
   Cache Status: OK
   Cache Ratio: 100% Read / 0% Write
   Total Cache Size: 64 MB
   Total Cache Memory Available: 32 MB
   No-Battery Write Cache: Disabled
   Battery/Capacitor Count: 0
   SATA NCQ Supported: False

so was firmware 2.34, now upgraded to latest (2.84).


Kernel was (is) linux-image-3.2.0-4-686-pae, version 3.2.68-1+deb7u4.

Back to linux.debian.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Bug#760393: Some feedback... Marco Gaiarin <gaio@linux.it> - 2016-03-29 23:50 +0200
  Bug#760393: Some feedback... Roger Shimizu <rogershimizu@gmail.com> - 2016-03-30 02:10 +0200
    Bug#760393: Some feedback... Marco Gaiarin <gaio@linux.it> - 2016-03-31 14:10 +0200

csiph-web