Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.kernel > #89351

Bug#1114695: (no subject)

Cross-posted to 2 groups.

Show all headers | View raw

I built Debian packages with kernels from
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tag/?h=v6.3.1.
The v6.3.1 tag boots correctly. With the v6.3.7 tag it still does not
hang after “loading initramfs,” but the output (debug information or
whatever—ACPI and PCI device info, etc.) becomes garbled. The garbling
occurs as follows: many lines are printed, some lines overwrite
previously printed ones, then the output continues only on the first
line while the other lines are “frozen.” Later on 6.3.7 i'm
booted into recovery mode (grub menu entry) and reached the cryptsetup
password prompt. I entered the correct password, but nothing was
displayed afterward and the boot did not proceed.

Later I’ll try to determine exactly which tag causes the boot failure.
However, the behavior between 6.3.1 and 6.3.7 is different then first
message about this bug: with 6.3.7 it at least reaches the cryptsetup
password prompt, whereas with the 6.12 kernel it hangs completely after
“loading initramfs.”

Back to linux.debian.kernel | Previous | Next | Find similar | Unroll thread

Thread

Bug#1114695: (no subject) John Doe <johndoe9232@firemail.cc> - 2025-09-22 06:20 +0200

csiph-web