Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.kernel > #85227
| From | Madis Janson <madis@cyber.ee> |
|---|---|
| Newsgroups | linux.debian.bugs.dist, linux.debian.kernel |
| Subject | Bug#1093558: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due |
| Date | 2025-01-19 23:40 +0100 |
| Message-ID | <K6M7v-ah4g-1@gated-at.bofh.it> (permalink) |
| Organization | linux.* mail to news gateway |
Cross-posted to 2 groups.
Package: src:linux
Version: 6.13~rc7-1~exp1
Severity: normal
Dear Maintainer,
I installed Debian on Odroid-M2 (using https://github.com/mth/u-boot-odroid-m2
by myself so UEFI provided 6.13-rc7 device tree for the board).
Otherwise it seems to work fine with the 6.13~rc6-1~exp1 kernel, but HDMI
output is not working due ROCKCHIP_DW_HDMI_QP being not set in the Debian
packages build configuration.
I tried also with 6.13-rc7 kernel compiled by myself, where I took the
Debian kernel configuration from /boot/config-6.13-rc6-arm64 and enabled
ROCKCHIP_DW_HDMI_QP. After booting this compiled kernel with
video=1920x1080@60 kernel parameter the HDMI output works (even Sway
started up, so it seems good for Wayland).
It would be useful to enable the ROCKCHIP_DW_HDMI_QP in Debian ARM64
packages kernel configuration to make HDMI work on various RK3588(s)
based single board computers.
Note. I the bug report is against rc7 kernel while I tested rc6.
I checked the config-6.13-rc7-arm64 in rc7 package, where
ROCKCHIP_DW_HDMI_QP is also not set, so there should be no difference.
-- Package-specific info:
** Version:
Linux version 6.13-rc6-arm64 (debian-kernel@lists.debian.org)
(aarch64-linux-gnu-gcc-14 (Debian 14.2.0-12) 14.2.0, GNU ld (GNU Binutils
for Debian) 2.43.50.20250108) #1 SMP Debian 6.13~rc6-1~exp1 (2025-01-12)
** Command line:
BOOT_IMAGE=/vmlinuz-6.13-rc6-arm64
root=UUID=dcf36c6d-8284-47a4-91a6-24b2a2e1e5b6 ro video=1920x1080@60
** Tainted: W (512)
* kernel issued warning
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Device Tree model: Hardkernel ODROID-M2
** Loaded modules:
binfmt_misc
realtek
dwmac_rk
rockchipdrm
stmmac_platform
hantro_vpu
stmmac
nls_ascii
dw_mipi_dsi
nls_cp437
dw_hdmi
crct10dif_ce
pcs_xpcs
vfat
polyval_ce
xhci_plat_hcd
v4l2_jpeg
polyval_generic
fat
phylink
v4l2_vp9
cec
xhci_hcd
rockchip_rga
ghash_ce
v4l2_h264
sdhci_of_dwcmshc
gf128mul
rockchip_saradc
videobuf2_dma_contig
mdio_devres
evdev
snd_soc_audio_graph_card
rc_core
v4l2_mem2mem
of_mdio
industrialio_triggered_buffer
optee
sdhci_pltfm
snd_soc_simple_card_utils
videobuf2_dma_sg
dw_mmc_rockchip
sha2_ce
snd_soc_es8316
snd_soc_rockchip_i2s_tdm
kfifo_buf
sha256_arm64
fusb302
fixed_phy
videobuf2_memops
sha1_ce
pwm_fan
ledtrig_default_on
dwc3
leds_gpio
snd_soc_core
tee
display_connector
industrialio
videobuf2_v4l2
sdhci
analogix_dp
dw_mmc_pltfm
fwnode_mdio
ohci_platform
rk805_pwrkey
tcpm
rockchip_thermal
nvmem_rockchip_otp
dw_wdt
libphy
snd_compress
drm_display_helper
videodev
dw_mmc
ohci_hcd
panthor
rockchip_dfi
cqhci
snd_pcm_dmaengine
ehci_platform
udc_core
snd_pcm
ehci_hcd
drm_gpuvm
drm_client_lib
drm_exec
drm_dma_helper
videobuf2_common
usbcore
snd_timer
mc
gpu_sched
snd
drm_shmem_helper
drm_kms_helper
soundcore
ulpi
cpufreq_dt
drm
efi_pstore
configfs
nfnetlink
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
nvme
nvme_core
nvme_auth
dm_crypt
dm_mod
rk808_regulator
fan53555
phy_rockchip_usbdp
typec
pl330
gpio_rockchip
phy_rockchip_samsung_hdptx
fixed
phy_rockchip_naneng_combphy
spi_rockchip
i2c_rk3x
phy_rockchip_inno_usb2
pwm_rockchip
usb_common
aes_neon_bs
aes_neon_blk
aes_ce_blk
aes_ce_cipher
** PCI devices:
0004:40:00.0 PCI bridge [0604]: Rockchip Electronics Co., Ltd RK3588 [1d87:3588] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 74
Bus: primary=40, secondary=41, subordinate=41, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f4200000-f42fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
Expansion ROM at f4300000 [virtual] [disabled] [size=64K]
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=16/32 Maskable- 64bit+
Address: 00000000fe650040 Data: 0000
Capabilities: [70] Express (v2) Root Port (Slot-), IntMsgNum 8
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP+ LTR+
10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable- Count=128 Masked-
Vector table: BAR=4 offset=00020000
PBA: BAR=4 offset=00028000
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn+ NFERptEn+ FERptEn+
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 9
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [148 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [180 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=10us LTR1.2_Threshold=26016ns
L1SubCtl2: T_PwrOn=10us
Capabilities: [190 v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?>
Kernel driver in use: pcieport
0004:41:00.0 Non-Volatile memory controller [0108]: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [1cc1:8201]
(rev 03) (prog-if 02 [NVM Express])
Subsystem: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive [1cc1:8201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 73
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit
Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (downgraded), Width x1 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00002100
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [158 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [178 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [180 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=26016ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: arm64 (aarch64)
Kernel: Linux 6.13-rc6-arm64 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.13-rc6-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.145
ii kmod 33+20240816-2
ii linux-base 4.11
Versions of packages linux-image-6.13-rc6-arm64 recommends:
ii apparmor 3.1.7-1+b3
Versions of packages linux-image-6.13-rc6-arm64 suggests:
pn debian-kernel-handbook <none>
ii firmware-linux-free 20241210-1
pn linux-doc-6.13 <none>
Versions of packages linux-image-6.13-rc6-arm64 is related to:
ii firmware-amd-graphics 20241210-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
pn firmware-intel-graphics <none>
pn firmware-intel-misc <none>
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
pn firmware-mediatek <none>
ii firmware-misc-nonfree 20241210-1
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
pn firmware-nvidia-graphics <none>
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Back to linux.debian.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
Bug#1093558: linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due Madis Janson <madis@cyber.ee> - 2025-01-19 23:40 +0100 Bug#1093558: marked as done (linux-image-6.13-rc6-arm64: No HDMI output on RK3588 SOC due) "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-02-09 10:10 +0100
csiph-web