Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd

From	Pierre Tomon <pierretom+12@ik.me>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd
Date	2024-03-27 19:30 +0100
Message-ID	<ImGc9-25pp-5@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Cross-posted to 2 groups.

Show all headers | View raw

Source: linux-signed-amd64
Version: 6.7.9+2
Severity: normal
X-Debbugs-CC: pierretom+12@ik.me

Dear Maintainer,

Since kernel 6.7.7-1 to 6.7.9+2 (amd64), I got this message when turning on the external drive.
The device is accessible after about 1 minute, then I can mount it and access data.
Does not happen on kernel 6.6.15+2 and prior versions.

SATA/USB controller: Bus 006 Device 003: ID 174c:5106 ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
SATA controler: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller (rev 01)

# dmesg
[   89.821220] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[   98.669813] usb 6-1: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 0.01
[   98.669829] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[   98.669836] usb 6-1: Product: AS2105
[   98.669842] usb 6-1: Manufacturer: ASMedia
[   98.669847] usb 6-1: SerialNumber:             XXXXXXXX
[   98.702925] usb-storage 6-1:1.0: USB Mass Storage device detected
[   98.703186] scsi host10: usb-storage 6-1:1.0
[   98.703323] usbcore: registered new interface driver usb-storage
[   98.712000] usbcore: registered new interface driver uas
[   99.729263] scsi 10:0:0:0: Direct-Access     ST3000DM 001-1CH166       CC29 PQ: 0 ANSI: 0
[   99.729842] sd 10:0:0:0: Attached scsi generic sg3 type 0
[   99.730034] sd 10:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
[  130.381128] usb 6-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  130.401814] sd 10:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[  130.402173] sd 10:0:0:0: [sdc] Write Protect is off
[  130.402181] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  130.402486] sd 10:0:0:0: [sdc] No Caching mode page found
[  130.402493] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[  130.403339] sd 10:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
[  161.100747] usb 6-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  161.395030]  sdc: sdc1 sdc2
[  161.395511] sd 10:0:0:0: [sdc] Attached SCSI disk

Back to linux.debian.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd Pierre Tomon <pierretom+12@ik.me> - 2024-03-27 19:30 +0100
  Processed: Re: reset SuperSpeed USB device number 2 using xhci_hcd "Debian Bug Tracking System" <owner@bugs.debian.org> - 2024-04-08 01:30 +0200
  Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd Pierre Tomon <pierretom+12@ik.me> - 2024-04-08 01:30 +0200
  Processed: Re: reset SuperSpeed USB device number 2 using xhci_hcd "Debian Bug Tracking System" <owner@bugs.debian.org> - 2024-05-28 11:40 +0200
  Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd Pierre Tomon <pierretom+12@ik.me> - 2024-05-28 11:40 +0200
  Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd Pierre Tomon <pierretom+12@ik.me> - 2024-06-22 13:10 +0200
    Bug#1067858: reset SuperSpeed USB device number 2 using xhci_hcd Diederik de Haas <didi.debian@cknow.org> - 2024-06-24 22:10 +0200
  Processed: Re: reset SuperSpeed USB device number 2 using xhci_hcd "Debian Bug Tracking System" <owner@bugs.debian.org> - 2024-06-22 13:10 +0200

csiph-web