Bug#971777: linux-image-5.8.0-1-arm64: Enable NXP Layerscape PCIe Controller Support

From	Salvatore Bonaccorso <carnil@debian.org>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#971777: linux-image-5.8.0-1-arm64: Enable NXP Layerscape PCIe Controller Support
Date	2020-10-10 21:40 +0200
Message-ID	<AYsSJ-3p4-5@gated-at.bofh.it> (permalink)
References	<AX89H-1mS-1@gated-at.bofh.it> <AX89H-1mS-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Cross-posted to 2 groups.

Show all headers | View raw

Control: tags -1 + moreinfo

On Wed, Oct 07, 2020 at 02:02:03PM +1100, Matt McBride wrote:
> Package: src:linux
> Version: 5.8.7-1
> Severity: important
> 
> Dear Maintainer,
> 
> We (Traverse) build an NXP Layerscape-based board, the Ten64[1] which
> is uses the LS1088A SoC.
> 
> A previous bug, #948576 enabled the majority of drivers required for
> the Layerscape SoC family, however, it did not enable the PCIe controller
> seen on most Layerscape SoCs.
> 
> Due to this, it is not possible to boot Debian from an NVMe SSD on the Ten64
> and other Layerscape boards - no PCIe controllers are detected and 'lspci'
> returns a blank output.
> 
> To resolve this, the following options need to be enabled in the kernel
> configuration:
> 
> CONFIG_PCI_LAYERSCAPE=y
> CONFIG_PCIE_LAYERSCAPE=y

Is this correct? CONFIG_PCIE_LAYERSCAPE does not seem available as
option.

Regards,
Salvatore

Back to linux.debian.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Bug#971777: linux-image-5.8.0-1-arm64: Enable NXP Layerscape PCIe Controller Support Salvatore Bonaccorso <carnil@debian.org> - 2020-10-10 21:40 +0200
  Bug#971777: linux-image-5.8.0-1-arm64: Enable NXP Layerscape PCIe Controller Support "Matt McBride" <matt@traverse.com.au> - 2020-10-11 04:40 +0200
    Bug#971777: linux-image-5.8.0-1-arm64: Enable NXP Layerscape PCIe Controller Support Salvatore Bonaccorso <carnil@debian.org> - 2020-10-11 09:40 +0200

csiph-web