Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.debian.kernel > #67040

Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4

From Bjørn Mork <bjorn@mork.no>
Newsgroups linux.debian.bugs.dist, linux.debian.kernel
Subject Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4
Date 2020-05-10 11:10 +0200
Message-ID <A4Q8a-4WE-13@gated-at.bofh.it> (permalink)
References <A4D1g-4UH-11@gated-at.bofh.it> <A4PlL-4q7-1@gated-at.bofh.it> <A4D1g-4UH-11@gated-at.bofh.it> <A4PlL-4q7-1@gated-at.bofh.it>
Organization m

Cross-posted to 2 groups.

Show all headers | View raw


Lucas Nussbaum <lucas@debian.org> writes:
> On 09/05/20 at 20:44 +0200, Bjørn Mork wrote:
>> Please enable CONFIG_PCIE_BRCMSTB on arm64.
>> 
>> The Raspberry Pi 4 has a VL805 xhci controller connected to the
>> PCIe bus on the SoC.  All USB ports are connected to this controller.
>> CONFIG_PCIE_BRCMSTB is therefore necessary for USB support.
>
> I am trying to boot a RPI4 with the 5.6 kernel from unstable, but it
> fails to boot (while it worked with 5.5 from unstable).
>
> What I'm seeing with 5.5, but not with 5.6, is:
> [    4.500333] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
> [    4.500585] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
> [    4.577842] mmc0: new high speed SDIO card at address 0001
> [    4.610694] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
> [    4.618812] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
> [    4.629268]  mmcblk1: p1 p2
>
> Did you also see that issue?

No, I didn't.  I am netbooting, so I wouldn't have noticed...

Don't think I've tried booting any Debian kernels from an SD card yet.
Will try to find some time to test it.  But I find using SD cards more
quite a hassle :-)

> Was it fixed by enabling
> CONFIG_PCIE_BRCMSTB, or is that a different issue?

Probably different.  I believe this driver just enables the PCIe
controller, which should be independent of anything else except the PCIe
connected xhci controller.


Bjørn

Back to linux.debian.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Bjørn Mork <bjorn@mork.no> - 2020-05-09 21:10 +0200
  Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Lucas Nussbaum <lucas@debian.org> - 2020-05-10 10:20 +0200
    Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Bjørn Mork <bjorn@mork.no> - 2020-05-10 11:10 +0200
    Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Bjørn Mork <bjorn@mork.no> - 2020-05-10 14:10 +0200
      Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Bjørn Mork <bjorn@mork.no> - 2020-05-10 14:30 +0200
        Bug#960129: linux-image-5.6.0-1-arm64: please enable CONFIG_PCIE_BRCMSTB in the arm64 kernel for Raspberry Pi 4 Lucas Nussbaum <lucas@debian.org> - 2020-05-10 15:00 +0200

csiph-web