Re: Serial console cable selection

From	Hils <hils@saynotospam.net>
Newsgroups	comp.sys.raspberry-pi
Subject	Re: Serial console cable selection
Date	2015-06-20 09:12 +0100
Organization	Aioe.org NNTP Server
Message-ID	<mm378v$qda$1@speranza.aioe.org> (permalink)
References	(1 earlier) <cuas8bF8igfU1@mid.individual.net> <slrn3vfsmo1ebg.g69.andrews@sdf.lonestar.org> <mlql4m$3c5$1@news.albasani.net> <alpine.BSF.2.00.1506180943220.52189@bunrab.ronnet.moc> <mm2jo2$qh4$1@news.albasani.net>

Show all headers | View raw

On 20/06/15 03:38, User Bp wrote:
> At this point a packaged solution for $10 looks pretty good if I only have
> to solder wires. If I'm reading http://www.nulsom.com/datasheet/NS-RS232_en.pdf
> corectly it appears that all the level changes are taken care of in both 
> directions. 

This was the cable I bought. Excellent piece of equipment, plug and play
with Debian. I suspect most Pi hackers will need one at some time.

http://www.modmypi.com/raspberry-pi/gpio-and-breadboarding/gpio-debugging-console-cables/usb-to-ttl-serial-cable-debug--console-cable-for-raspberry-pi

Back to comp.sys.raspberry-pi | Previous | Next | Find similar | Unroll thread

Thread

Re: Serial console cable selection Hils <hils@saynotospam.net> - 2015-06-20 09:12 +0100

csiph-web