Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.sys.raspberry-pi > #8978

Re: mechanical dimensions

Path csiph.com!aioe.org!news.swapon.de!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From Stefan Krister <stefan.krister@creative.chaos.de>
Newsgroups comp.sys.raspberry-pi
Subject Re: mechanical dimensions
Date Wed, 24 Jun 2015 08:59:28 +0200
Lines 20
Message-ID <cuv2qgFchbbU4@mid.individual.net> (permalink)
References <cuqhn7F7u8qU1@mid.individual.net> <mm9bli$6i7$1@dont-email.me>
Mime-Version 1.0
Content-Type text/plain; charset=utf-8
Content-Transfer-Encoding 7bit
X-Trace individual.net vGaQy7JVj7d4dPVYCn2gBQb4uUW6+nioCVXVV0NieS9ZE4S8vw
Cancel-Lock sha1:+CyNrrFTa2nKTnB9tyUhIaORII8=
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:38.0) Gecko/20100101 Thunderbird/38.0.1
In-Reply-To <mm9bli$6i7$1@dont-email.me>
Xref aioe.org comp.sys.raspberry-pi:8978

Show key headers only | View raw

Hi Martin,

Martin Gregorie schrieb am 22.06.2015 um 18:04:
>
> Does OpenSCAD let you import photos so you can draw over them on another 
> layer?  

No, it doesn't.

> Alternatively, if you own a vernier caliper or even a good steel ruler, 
> why not use that to measure the RPi pcb, hole positions, etc? That 
> should  should be accurate enough. You can use the caliper or a set of 
> drills to measure the hole sizes very accurately. 

Sure I did that already. But as mentioned earlier - it would be nice if
there is a drawing with measurements from the side, front and back.

Bye

Stefan

Back to comp.sys.raspberry-pi | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-22 15:43 +0200
  Re: mechanical dimensions Tomasz Torcz <zdzichu@irc.-spamu.nie.chce-.pl> - 2015-06-22 17:08 +0000
    Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:56 +0200
  Re: mechanical dimensions rickman <gnuarm@gmail.com> - 2015-06-22 21:37 -0400
    Re: mechanical dimensions Andy Burns <usenet.feb2014@adslpipe.co.uk> - 2015-06-23 07:22 +0100
  Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:55 +0200
  Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:59 +0200
    Re: mechanical dimensions Theo Markettos <theom+news@chiark.greenend.org.uk> - 2015-06-24 18:18 +0100
      Re: mechanical dimensions Martin Gregorie <martin@address-in-sig.invalid> - 2015-06-24 22:33 +0000
  Re: mechanical dimensions rickman <gnuarm@gmail.com> - 2015-06-24 18:07 -0400

csiph-web