Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.sys.mac.system > #59563
| Subject | Re: Can I go straight from 10.7.5 to 10.9.3? |
|---|---|
| Date | 2014-05-20 19:51 -0700 |
| From | Otto Pylot <otto@bogus.address.com> |
| Newsgroups | comp.sys.mac.system |
| Message-ID | <200520141951290472%otto@bogus.address.com> (permalink) |
| References | <200520141741466543%otto@bogus.address.com> <1lm01dn.uiy7vw19qzzxwN%dempson@actrix.gen.nz> |
| Organization | Sonic.Net |
In article <1lm01dn.uiy7vw19qzzxwN%dempson@actrix.gen.nz>, David Empson <dempson@actrix.gen.nz> wrote: > Otto Pylot <otto@bogus.address.com> wrote: > > > Never did bother to go to 10.8 so any issues I should be aware of > > jumping from 10.7.5 to 10.9.3? I do have a bootable clone of my current > > HD on an external drive done with CCC. > > Answering the question in the subject: yes, assuming your Mac is > supported by 10.9. Some Macs able to run 10.7 can't upgrade any further: > Late 2006 iMac and MacBook Pro, Mid 2007 Mac Mini, original (early 2008) > MacBook Air, polycarbonate MacBook models prior to early 2009, Mac Pro > prior to early 2008, Xserve prior to early 2009. > > It is possible to upgrade directly to 10.9 from any of 10.6.8, 10.7.x or > 10.8.x. > > You will already have the minimum amount of memory required (2 GB) since > that requirement didn't change between 10.7 and 10.9. In theory, 10.9 > should perform somewhat better than 10.7 in low memory conditions, due > to using in-memory compression before it resorts to swapping memory to > disk. Despite this, I recommending 4 GB as a more reasonable minimum > amount of memory for 10.9, and those running memory heavy software (e.g. > Photoshop, virtual machines) will almost certainly need more than that. > > As you are already on 10.7, you are past the point where most of the > application compatibility problems occur (PowerPC applications and lack > of Rosetta in 10.7 or later). > > There are some obscure system components removed in 10.9, notably Open > Transport networking, which stopped MT-Newswatcher working, but very few > other applications were affected by that one. > > In general terms, some applications have needed updates to fix issues > running on 10.9, so you should make sure you've installed any free > updates, and check with the developer for any important apps you use > which may need a paid upgrade to officially support 10.9. > > http://roaringapps.com may be a helpful resource, with user-supplied > comments about application compatibility with each of 10.7 and later. > > 10.9.3 reinstates iTunes direct syncing of contacts/calendars with iOS > devices, which was one of the annoyances for some people with 10.9 to > 10.9.2. It hasn't restored copying of contacts and calendars to non-iOS > iPods. > > If you have non-Apple devices which currently sync using something like > Missing Sync, they probably still can't sync in 10.9.3. > > I haven't seen enough information yet about exactly what Apple restored > in 10.9.3 to get iTunes sync with iOS devices working again, but the > reason it stopped working in 10.9 to 10.9.2 was that Apple had dropped > Sync Services, which other applications like Missing Sync were using to > access the contacts and calendars. > > Mark/Space haven't updated their incompatibility warning since 10.9.3 > was released, or said anything about it on their blog, but perhaps they > just haven't finshed testing yet, or perhaps Sync Services has only been > partly restored (only working with iTunes). Thank you. I should've made my post a little more complete. I have a mid-2011 Mac Book Air with 4GB memory. I use the current version of Thoth (paid) and I know that is compatible. The reason I hadn't upgraded before was the inability to sync iOS devices via USB, but that's been reinstated with this version. I've already upgraded iTunes so that's good to go. -- Deja Moo: I've seen this bullshit before. Please respond to: scasse@invalid.net replacing invalid with sonic.
Back to comp.sys.mac.system | Previous | Next — Previous in thread | Find similar | Unroll thread
Can I go straight from 10.7.5 to 10.9.3? Otto Pylot <otto@bogus.address.com> - 2014-05-20 17:41 -0700
Re: Can I go straight from 10.7.5 to 10.9.3? dempson@actrix.gen.nz (David Empson) - 2014-05-21 14:17 +1200
Re: Can I go straight from 10.7.5 to 10.9.3? Otto Pylot <otto@bogus.address.com> - 2014-05-20 19:51 -0700
csiph-web