Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.sys.laptops > #1632 > unrolled thread

Re: Keys stuck - Asus EEE 701

Started bykellysuemcclurg <kellysuemcclurg.5l2sla@no.email.invalid>
First post2012-10-25 09:00 -0500
Last post2012-10-27 07:42 +0000
Articles 2 — 2 participants

Back to article view | Back to comp.sys.laptops

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: Keys stuck - Asus EEE 701 kellysuemcclurg <kellysuemcclurg.5l2sla@no.email.invalid> - 2012-10-25 09:00 -0500
    Re: Keys stuck - Asus EEE 701 wrat@panix.com (the wharf rat) - 2012-10-27 07:42 +0000

#1632 — Re: Keys stuck - Asus EEE 701

Fromkellysuemcclurg <kellysuemcclurg.5l2sla@no.email.invalid>
Date2012-10-25 09:00 -0500
SubjectRe: Keys stuck - Asus EEE 701
Message-ID<kellysuemcclurg.5l2sla@no.email.invalid>
Hi there,

I've followed your instructions to replace my asus keyboard but have
trouble with the connector part.  I can't figure out how to remove the
connector from the computer.  Also, my new board doesn't have the
plastic connector on it, just the flat ribbon cable.  How do I attach
the bare ribbon cable to the plastic connector?

I appreciate any help you can give me!

thanks,
kelly

[toc] | [next] | [standalone]


#1633

Fromwrat@panix.com (the wharf rat)
Date2012-10-27 07:42 +0000
Message-ID<k6g38v$l3e$1@reader1.panix.com>
In reply to#1632
In article <kellysuemcclurg.5l2sla@no.email.invalid>,
kellysuemcclurg  <kellysuemcclurg.5l2sla@no.email.invalid> wrote:
>
>Hi there,
>
>I've followed your instructions to replace my asus keyboard but have
>trouble with the connector part.  I can't figure out how to remove the
>connector from the computer.  Also, my new board doesn't have the
>plastic connector on it, just the flat ribbon cable.  How do I attach
>the bare ribbon cable to the plastic connector?

	Well, I've never looked inside an Asus like that but I'll bet
you have what's called a ZIF connector.  Look carefully at the top and
sides of the motherboard connector.  You'll see a little door or flap
on the top OR two little knobs on the sides.  VERY VERY CAREFULLY with
a NOT-SHARP PLASTIC tool or your fingernails (if you're a girl, lol, never
saw a guy with ones that were sharp enough ;-) lift that little door or push
the little knobs out (pop them out a bit).  They're very delicate and don't
move much so be careful.  Now slide the cable into the slot moving the latches
revealed and push the door down or the latches back.

[toc] | [prev] | [standalone]


Back to top | Article view | comp.sys.laptops


csiph-web