Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.sys.apple2.programmer > #1948 > unrolled thread

Re: Hurray for real Uthernet2 hardware...

Back to article view | Back to comp.sys.apple2.programmer

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: Hurray for real Uthernet2 hardware... D Finnigan <dog_cow@macgui.com> - 2015-11-02 22:54 +0000
    Re: Hurray for real Uthernet2 hardware... David Schmenk <dschmenk@gmail.com> - 2015-11-03 07:58 -0800

#1948 — Re: Hurray for real Uthernet2 hardware...

David Schmenk wrote:
> I was able to use the fast auto-increment mode that just wouldn't work on
> my homebrew card.
> 
> So, if you are looking amaze your friends with your Apple II's internet
> prowess, here is a (extremely minimal) web server written in PLASMA.
> Simply
> boot the disk image (provided at the end) and type +HTTPD at the prompt
> (the + is required). Assuming you have DHCP configured for your network,
> you'll be off and running. It will auto-detect your card and slot - no
> need
> for configuration settings.
>...
> 
> Note: this won't work with the original Uthernet yet; I still have to
> finish the TCP stack. The Uthernet2 driver uses the built-in TCP/IP stack
> of the Wiznet 5100 chip.
> 
> https://github.com/dschmenk/PLASMA/blob/master/HTTPD.PO
> 
> Dave...
>

Very nice. I want to do a real simple 2-way chat program as my first real
application on the W5100. This will be all assembly of course, but maybe
PLASMA would make it even simpler? It will just work like the old-school
Unix talk or write commands.


-- 
]DF$
The Marina IP stack for Apple II--
http://marina.a2hq.com/

[toc] | [next] | [standalone]

#1949

On Monday, 2 November 2015 14:56:23 UTC-8, D Finnigan  wrote:
> David Schmenk wrote:
> > I was able to use the fast auto-increment mode that just wouldn't work on
> > my homebrew card.
> > 
> > So, if you are looking amaze your friends with your Apple II's internet
> > prowess, here is a (extremely minimal) web server written in PLASMA.
> > Simply
> > boot the disk image (provided at the end) and type +HTTPD at the prompt
> > (the + is required). Assuming you have DHCP configured for your network,
> > you'll be off and running. It will auto-detect your card and slot - no
> > need
> > for configuration settings.
> >...
> > 
> > Note: this won't work with the original Uthernet yet; I still have to
> > finish the TCP stack. The Uthernet2 driver uses the built-in TCP/IP stack
> > of the Wiznet 5100 chip.
> > 
> > https://github.com/dschmenk/PLASMA/blob/master/HTTPD.PO
> > 
> > Dave...
> >
> 
> Very nice. I want to do a real simple 2-way chat program as my first real
> application on the W5100. This will be all assembly of course, but maybe
> PLASMA would make it even simpler? 

Perhaps ;-) One of the concepts behind last weeks fiber library was to make writing such applications conceptually easier. Dedicate a fiber to servicing the incoming packets and it looks like a typical networked program.

> It will just work like the old-school
> Unix talk or write commands.
> 
> 
> -- 
> ]DF$
> The Marina IP stack for Apple II--
> http://marina.a2hq.com/

[toc] | [prev] | [standalone]

Back to top | Article view | comp.sys.apple2.programmer

csiph-web