Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #14900 > unrolled thread
| Started by | Andy Ross <andyr@wolfram.com> |
|---|---|
| First post | 2013-06-16 09:09 +0000 |
| Last post | 2013-06-20 08:02 +0000 |
| Articles | 5 — 2 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: How does one get data out of a TemporalData object? Andy Ross <andyr@wolfram.com> - 2013-06-16 09:09 +0000
Re: How does one get data out of a TemporalData object? Joe Gwinn <joegwinn@comcast.net> - 2013-06-17 10:17 +0000
Re: How does one get data out of a TemporalData object? Andy Ross <andyr@wolfram.com> - 2013-06-19 05:22 +0000
Re: How does one get data out of a TemporalData object? Andy Ross <andyr@wolfram.com> - 2013-06-19 05:22 +0000
Re: How does one get data out of a TemporalData object? Joe Gwinn <joegwinn@comcast.net> - 2013-06-20 08:02 +0000
| From | Andy Ross <andyr@wolfram.com> |
|---|---|
| Date | 2013-06-16 09:09 +0000 |
| Subject | Re: How does one get data out of a TemporalData object? |
| Message-ID | <kpjvbv$9mc$1@smc.vnet.net> |
TemporalData has a number of properties for extracting the parts you need. To get the paths with time stamps use TemporalData[...]["Paths"]. To get the states use TemporalData[...]["States"]. I recommend looking at the details section of the documentation for TemporalData to see the full list of properties and read through the examples on that page to see how each is used. Andy Ross Wolfram Research On 6/15/2013 3:25 AM, Joe Gwinn wrote: > I would like to generate some random signals for use in exploring > signal-processing algorithms. > > For use as synthetic signals for the algorithm to chew upon, I'd like > to use ContinuousMarkovProcess and TelegraphProcess with > RandomFunction. With these, I can do statistics and plot things > freely. > > What I cannot quite get is a time series ready for such indignities as > Fourier[]. > > Now I can manually disassemble the data structure, but I don't find a > list of equispaced samples, I get a transition list, which is not the > same thing. > > Interpolation[Normal[temporal data object] // First, InterpolationOrder > -> 0] almost works, but the fine details are smeared over, even though > InterpolationOrder -> 0 works in ListLinePlot et al without apparent > smearing. > > What am I missing? It seems like Probability and Statistics has become > a walled city within Mathematica. I'm hoping to find a door in the wall, > rather than be forced to build by own little city one brick at a time. > > Joe Gwinn >
[toc] | [next] | [standalone]
| From | Joe Gwinn <joegwinn@comcast.net> |
|---|---|
| Date | 2013-06-17 10:17 +0000 |
| Message-ID | <kpmnnp$h3h$1@smc.vnet.net> |
| In reply to | #14900 |
In article <kpjvbv$9mc$1@smc.vnet.net>, Andy Ross <andyr@wolfram.com>
wrote:
Andy,
> TemporalData has a number of properties for extracting the parts you
> need. To get the paths with time stamps use TemporalData[...]["Paths"].
> To get the states use TemporalData[...]["States"].
>
> I recommend looking at the details section of the documentation for
> TemporalData to see the full list of properties and read through the
> examples on that page to see how each is used.
I had looked over the documentation, and nothing jumped out. I looked
at every mention of TemporalData, and found nothing that seemed
suitable.
But I didn't try States, so I just did. It yields a list of alternating
1 and 2 values, which isn't a complete answer to the problem, as the
time values are missing. If one just uses Fourier[], one will get some
kind of Periodogram, which is not what is sought.
Let me give a code example:
\[ScriptCapitalP] = ContinuousMarkovProcess[{1, 0}, ({
{-3, 3},
{1, -1}
})];
data=RandomFunction[\[ScriptCapitalP],{0,20}]
Fourier[data]
This yields a complaint:
Fourier::fftl:
(((((("\"Argument \!\(\*TagBox[\nRowBox[{\\\"TemporalData\\\",
\\\"[\\\", PanelBox[" 1) ", FrameMargins->Small], \\\"]\\\"}],
InterpretTemplate[TemporalData[Automatic, {{{1, 2, 1, 2, 1, 2, 1, 2, 1,
2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1}}, {{{0``15.954589770191005,
0.01520207123587128013320057817736596917`14.129940038322594,
0.95824522046395536932862513249273766604`15.644199356725549,
1.53128564596308252148382664967984035205`15.736304825316484,
2.28962713530000690099771260582537312886`15.797207858258304,
3.28670141416927664988333023187555326092`15.839226787640209,
3.38168097695521799981621844019305806672`15.842081650549387,
4.0716904019295301685379386805431332727`15.859211783981653,
5.25370702200219072713176547011226038622`15.878918089214274,
5.91828379716574832280816964564910319058`15.88678718369098,
6.12633788645240157414249230434964341735`15.888924305967711,
6.19666658844600659408879868858704605186`15.889616516866917,
9.58526332575202981025003709494096121015`15.911492152203763,
9.8441361181069966832633195553354003832`15.912572420088354,
14.33613695082054447978910756738149487066`15.925305933162454,
14.96549983870748084202749476200455050281`15.926498477053611,
15.17014786638371663403108748271496533041`15.92686559286194,
15.36161929373388768828517022927544623659`15.927200484830422,
15.67573549317739061376647722217804251544`15.927732699101226,
15.8362986262877527919959498312816012794`15.927996832624787,
16.94396941821241069345266065715083372759`15.929686408696478,
17.04737697478590359190098510749722701209`15.929833245160726,
22.73457835309395939446096043959096018021`15.93589515332067}}}, 1, {")
Discrete) ", 1}, {") Continuous) ", 1}, 1, {}}]& ], Editable->False,
SelectWithContents->True, Selectable->True]\) is not a non-empty list
or rectangular array of numeric quantities.\"")
Now, note that the following appears to work:
plot1 = ListLinePlot[data, InterpolationOrder -> 0,
PlotRange -> {1, 2.1}, Ticks -> {Automatic, {1, 2, 3}},
Filling -> Bottom]
But when I do this:
datainter =
Interpolation[Normal[data] // First, InterpolationOrder -> 0]
plot2 = Plot[datainter[t], {t, 0, 20}, PlotRange -> All,
Filling -> Bottom]
I get a different answer, and other paths yield yet other answers.
What I'm looking for is for instance a function that can be called from
Table[] to yield a list of equispaced samples suitable for Fourier[].
The locations and interval between samples may vary as needed to keep
Fourier happy - list length will be an exact power of two, and there
may be zero padding added.
Thanks,
Joe Gwinn
> Andy Ross
> Wolfram Research
>
> On 6/15/2013 3:25 AM, Joe Gwinn wrote:
> > I would like to generate some random signals for use in exploring
> > signal-processing algorithms.
> >
> > For use as synthetic signals for the algorithm to chew upon, I'd like
> > to use ContinuousMarkovProcess and TelegraphProcess with
> > RandomFunction. With these, I can do statistics and plot things
> > freely.
> >
> > What I cannot quite get is a time series ready for such indignities as
> > Fourier[].
> >
> > Now I can manually disassemble the data structure, but I don't find a
> > list of equispaced samples, I get a transition list, which is not the
> > same thing.
> >
> > Interpolation[Normal[temporal data object] // First, InterpolationOrder
> > -> 0] almost works, but the fine details are smeared over, even though
> > InterpolationOrder -> 0 works in ListLinePlot et al without apparent
> > smearing.
> >
> > What am I missing? It seems like Probability and Statistics has become
> > a walled city within Mathematica. I'm hoping to find a door in the wall,
> > rather than be forced to build by own little city one brick at a time.
> >
> > Joe Gwinn
> >
>
>
[toc] | [prev] | [next] | [standalone]
| From | Andy Ross <andyr@wolfram.com> |
|---|---|
| Date | 2013-06-19 05:22 +0000 |
| Message-ID | <kprf65$15u$1@smc.vnet.net> |
| In reply to | #14900 |
Does the following do what you want?
Plot[data["SliceData", t], {t, 0, 20}, Filling -> Bottom]
The "SliceData" property performs the same interpolation as ListLinePlot
in this case (can be controlled via Method option) and returns
time-value pairs.
-Andy
On 6/17/2013 5:29 AM, Joe Gwinn wrote:
> In article <kpjvbv$9mc$1@smc.vnet.net>, Andy Ross <andyr@wolfram.com>
> wrote:
>
> Andy,
>
>> TemporalData has a number of properties for extracting the parts you
>> need. To get the paths with time stamps use TemporalData[...]["Paths"].
>> To get the states use TemporalData[...]["States"].
>>
>> I recommend looking at the details section of the documentation for
>> TemporalData to see the full list of properties and read through the
>> examples on that page to see how each is used.
> I had looked over the documentation, and nothing jumped out. I looked
> at every mention of TemporalData, and found nothing that seemed
> suitable.
>
> But I didn't try States, so I just did. It yields a list of alternating
> 1 and 2 values, which isn't a complete answer to the problem, as the
> time values are missing. If one just uses Fourier[], one will get some
> kind of Periodogram, which is not what is sought.
>
> Let me give a code example:
>
> \[ScriptCapitalP] = ContinuousMarkovProcess[{1, 0}, ({
> {-3, 3},
> {1, -1}
> })];
> data=RandomFunction[\[ScriptCapitalP],{0,20}]
> Fourier[data]
>
> This yields a complaint:
> Fourier::fftl:
> (((((("\"Argument \!\(\*TagBox[\nRowBox[{\\\"TemporalData\\\",
> \\\"[\\\", PanelBox[" 1) ", FrameMargins->Small], \\\"]\\\"}],
> InterpretTemplate[TemporalData[Automatic, {{{1, 2, 1, 2, 1, 2, 1, 2, 1,
> 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1}}, {{{0``15.954589770191005,
> 0.01520207123587128013320057817736596917`14.129940038322594,
> 0.95824522046395536932862513249273766604`15.644199356725549,
> 1.53128564596308252148382664967984035205`15.736304825316484,
> 2.28962713530000690099771260582537312886`15.797207858258304,
> 3.28670141416927664988333023187555326092`15.839226787640209,
> 3.38168097695521799981621844019305806672`15.842081650549387,
> 4.0716904019295301685379386805431332727`15.859211783981653,
> 5.25370702200219072713176547011226038622`15.878918089214274,
> 5.91828379716574832280816964564910319058`15.88678718369098,
> 6.12633788645240157414249230434964341735`15.888924305967711,
> 6.19666658844600659408879868858704605186`15.889616516866917,
> 9.58526332575202981025003709494096121015`15.911492152203763,
> 9.8441361181069966832633195553354003832`15.912572420088354,
> 14.33613695082054447978910756738149487066`15.925305933162454,
> 14.96549983870748084202749476200455050281`15.926498477053611,
> 15.17014786638371663403108748271496533041`15.92686559286194,
> 15.36161929373388768828517022927544623659`15.927200484830422,
> 15.67573549317739061376647722217804251544`15.927732699101226,
> 15.8362986262877527919959498312816012794`15.927996832624787,
> 16.94396941821241069345266065715083372759`15.929686408696478,
> 17.04737697478590359190098510749722701209`15.929833245160726,
> 22.73457835309395939446096043959096018021`15.93589515332067}}}, 1, {")
> Discrete) ", 1}, {") Continuous) ", 1}, 1, {}}]& ], Editable->False,
> SelectWithContents->True, Selectable->True]\) is not a non-empty list
> or rectangular array of numeric quantities.\"")
>
> Now, note that the following appears to work:
>
> plot1 = ListLinePlot[data, InterpolationOrder -> 0,
> PlotRange -> {1, 2.1}, Ticks -> {Automatic, {1, 2, 3}},
> Filling -> Bottom]
>
> But when I do this:
>
> datainter =
> Interpolation[Normal[data] // First, InterpolationOrder -> 0]
> plot2 = Plot[datainter[t], {t, 0, 20}, PlotRange -> All,
> Filling -> Bottom]
>
> I get a different answer, and other paths yield yet other answers.
>
>
> What I'm looking for is for instance a function that can be called from
> Table[] to yield a list of equispaced samples suitable for Fourier[].
> The locations and interval between samples may vary as needed to keep
> Fourier happy - list length will be an exact power of two, and there
> may be zero padding added.
>
> Thanks,
>
> Joe Gwinn
>
>
>> Andy Ross
>> Wolfram Research
>>
>> On 6/15/2013 3:25 AM, Joe Gwinn wrote:
>>> I would like to generate some random signals for use in exploring
>>> signal-processing algorithms.
>>>
>>> For use as synthetic signals for the algorithm to chew upon, I'd like
>>> to use ContinuousMarkovProcess and TelegraphProcess with
>>> RandomFunction. With these, I can do statistics and plot things
>>> freely.
>>>
>>> What I cannot quite get is a time series ready for such indignities as
>>> Fourier[].
>>>
>>> Now I can manually disassemble the data structure, but I don't find a
>>> list of equispaced samples, I get a transition list, which is not the
>>> same thing.
>>>
>>> Interpolation[Normal[temporal data object] // First, InterpolationOrder
>>> -> 0] almost works, but the fine details are smeared over, even though
>>> InterpolationOrder -> 0 works in ListLinePlot et al without apparent
>>> smearing.
>>>
>>> What am I missing? It seems like Probability and Statistics has become
>>> a walled city within Mathematica. I'm hoping to find a door in the wall,
>>> rather than be forced to build by own little city one brick at a time.
>>>
>>> Joe Gwinn
>>>
>>
[toc] | [prev] | [next] | [standalone]
| From | Andy Ross <andyr@wolfram.com> |
|---|---|
| Date | 2013-06-19 05:22 +0000 |
| Message-ID | <kprf6q$163$1@smc.vnet.net> |
| In reply to | #14900 |
My mistake, it only returns the interpolated states, not time-value
pairs. It is easy enough to get both if you want them though.
Table[{t, data["SliceData", t][[1]]}, {t, 0, 20, .1}]
-Andy
On 6/17/2013 8:08 AM, Andy Ross wrote:
> Does the following do what you want?
>
> Plot[data["SliceData", t], {t, 0, 20}, Filling -> Bottom]
>
> The "SliceData" property performs the same interpolation as
> ListLinePlot in this case (can be controlled via Method option) and
> returns time-value pairs.
>
> -Andy
>
> On 6/17/2013 5:29 AM, Joe Gwinn wrote:
>> In article <kpjvbv$9mc$1@smc.vnet.net>, Andy Ross <andyr@wolfram.com>
>> wrote:
>>
>> Andy,
>>
>>> TemporalData has a number of properties for extracting the parts you
>>> need. To get the paths with time stamps use TemporalData[...]["Paths"].
>>> To get the states use TemporalData[...]["States"].
>>>
>>> I recommend looking at the details section of the documentation for
>>> TemporalData to see the full list of properties and read through the
>>> examples on that page to see how each is used.
>> I had looked over the documentation, and nothing jumped out. I looked
>> at every mention of TemporalData, and found nothing that seemed
>> suitable.
>>
>> But I didn't try States, so I just did. It yields a list of alternating
>> 1 and 2 values, which isn't a complete answer to the problem, as the
>> time values are missing. If one just uses Fourier[], one will get some
>> kind of Periodogram, which is not what is sought.
>>
>> Let me give a code example:
>>
>> \[ScriptCapitalP] = ContinuousMarkovProcess[{1, 0}, ({
>> {-3, 3},
>> {1, -1}
>> })];
>> data=RandomFunction[\[ScriptCapitalP],{0,20}]
>> Fourier[data]
>>
>> This yields a complaint:
>> Fourier::fftl:
>> (((((("\"Argument \!\(\*TagBox[\nRowBox[{\\\"TemporalData\\\",
>> \\\"[\\\", PanelBox[" 1) ", FrameMargins->Small], \\\"]\\\"}],
>> InterpretTemplate[TemporalData[Automatic, {{{1, 2, 1, 2, 1, 2, 1, 2, 1,
>> 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1}}, {{{0``15.954589770191005,
>> 0.01520207123587128013320057817736596917`14.129940038322594,
>> 0.95824522046395536932862513249273766604`15.644199356725549,
>> 1.53128564596308252148382664967984035205`15.736304825316484,
>> 2.28962713530000690099771260582537312886`15.797207858258304,
>> 3.28670141416927664988333023187555326092`15.839226787640209,
>> 3.38168097695521799981621844019305806672`15.842081650549387,
>> 4.0716904019295301685379386805431332727`15.859211783981653,
>> 5.25370702200219072713176547011226038622`15.878918089214274,
>> 5.91828379716574832280816964564910319058`15.88678718369098,
>> 6.12633788645240157414249230434964341735`15.888924305967711,
>> 6.19666658844600659408879868858704605186`15.889616516866917,
>> 9.58526332575202981025003709494096121015`15.911492152203763,
>> 9.8441361181069966832633195553354003832`15.912572420088354,
>> 14.33613695082054447978910756738149487066`15.925305933162454,
>> 14.96549983870748084202749476200455050281`15.926498477053611,
>> 15.17014786638371663403108748271496533041`15.92686559286194,
>> 15.36161929373388768828517022927544623659`15.927200484830422,
>> 15.67573549317739061376647722217804251544`15.927732699101226,
>> 15.8362986262877527919959498312816012794`15.927996832624787,
>> 16.94396941821241069345266065715083372759`15.929686408696478,
>> 17.04737697478590359190098510749722701209`15.929833245160726,
>> 22.73457835309395939446096043959096018021`15.93589515332067}}}, 1, {")
>> Discrete) ", 1}, {") Continuous) ", 1}, 1, {}}]& ], Editable->False,
>> SelectWithContents->True, Selectable->True]\) is not a non-empty list
>> or rectangular array of numeric quantities.\"")
>>
>> Now, note that the following appears to work:
>>
>> plot1 = ListLinePlot[data, InterpolationOrder -> 0,
>> PlotRange -> {1, 2.1}, Ticks -> {Automatic, {1, 2, 3}},
>> Filling -> Bottom]
>>
>> But when I do this:
>>
>> datainter =
>> Interpolation[Normal[data] // First, InterpolationOrder -> 0]
>> plot2 = Plot[datainter[t], {t, 0, 20}, PlotRange -> All,
>> Filling -> Bottom]
>>
>> I get a different answer, and other paths yield yet other answers.
>>
>>
>> What I'm looking for is for instance a function that can be called from
>> Table[] to yield a list of equispaced samples suitable for Fourier[].
>> The locations and interval between samples may vary as needed to keep
>> Fourier happy - list length will be an exact power of two, and there
>> may be zero padding added.
>>
>> Thanks,
>>
>> Joe Gwinn
>>
>>
>>> Andy Ross
>>> Wolfram Research
>>>
>>> On 6/15/2013 3:25 AM, Joe Gwinn wrote:
>>>> I would like to generate some random signals for use in exploring
>>>> signal-processing algorithms.
>>>>
>>>> For use as synthetic signals for the algorithm to chew upon, I'd like
>>>> to use ContinuousMarkovProcess and TelegraphProcess with
>>>> RandomFunction. With these, I can do statistics and plot things
>>>> freely.
>>>>
>>>> What I cannot quite get is a time series ready for such indignities as
>>>> Fourier[].
>>>>
>>>> Now I can manually disassemble the data structure, but I don't find a
>>>> list of equispaced samples, I get a transition list, which is not the
>>>> same thing.
>>>>
>>>> Interpolation[Normal[temporal data object] // First,
>>>> InterpolationOrder
>>>> -> 0] almost works, but the fine details are smeared over, even though
>>>> InterpolationOrder -> 0 works in ListLinePlot et al without apparent
>>>> smearing.
>>>>
>>>> What am I missing? It seems like Probability and Statistics has
>>>> become
>>>> a walled city within Mathematica. I'm hoping to find a door in the
>>>> wall,
>>>> rather than be forced to build by own little city one brick at a time.
>>>>
>>>> Joe Gwinn
>>>>
>>>
>
[toc] | [prev] | [next] | [standalone]
| From | Joe Gwinn <joegwinn@comcast.net> |
|---|---|
| Date | 2013-06-20 08:02 +0000 |
| Message-ID | <kpucve$9fk$1@smc.vnet.net> |
| In reply to | #14932 |
In article <kprf6q$163$1@smc.vnet.net>, Andy Ross <andyr@wolfram.com>
wrote:
Andy,
> My mistake, it only returns the interpolated states, not time-value
> pairs. It is easy enough to get both if you want them though.
>
> Table[{t, data["SliceData", t][[1]]}, {t, 0, 20, .1}]
This worked. I'll suggest (via the prerelease program) that a small
example be added to the online documentation.
Thanks,
Joe
> -Andy
>
> On 6/17/2013 8:08 AM, Andy Ross wrote:
> > Does the following do what you want?
> >
> > Plot[data["SliceData", t], {t, 0, 20}, Filling -> Bottom]
> >
> > The "SliceData" property performs the same interpolation as
> > ListLinePlot in this case (can be controlled via Method option) and
> > returns time-value pairs.
> >
> > -Andy
> >
> > On 6/17/2013 5:29 AM, Joe Gwinn wrote:
> >> In article <kpjvbv$9mc$1@smc.vnet.net>, Andy Ross <andyr@wolfram.com>
> >> wrote:
> >>
> >> Andy,
> >>
> >>> TemporalData has a number of properties for extracting the parts you
> >>> need. To get the paths with time stamps use TemporalData[...]["Paths"].
> >>> To get the states use TemporalData[...]["States"].
> >>>
> >>> I recommend looking at the details section of the documentation for
> >>> TemporalData to see the full list of properties and read through the
> >>> examples on that page to see how each is used.
> >> I had looked over the documentation, and nothing jumped out. I looked
> >> at every mention of TemporalData, and found nothing that seemed
> >> suitable.
> >>
> >> But I didn't try States, so I just did. It yields a list of alternating
> >> 1 and 2 values, which isn't a complete answer to the problem, as the
> >> time values are missing. If one just uses Fourier[], one will get some
> >> kind of Periodogram, which is not what is sought.
> >>
> >> Let me give a code example:
> >>
> >> \[ScriptCapitalP] = ContinuousMarkovProcess[{1, 0}, ({
> >> {-3, 3},
> >> {1, -1}
> >> })];
> >> data=RandomFunction[\[ScriptCapitalP],{0,20}]
> >> Fourier[data]
> >>
> >> This yields a complaint:
> >> Fourier::fftl:
> >> (((((("\"Argument \!\(\*TagBox[\nRowBox[{\\\"TemporalData\\\",
> >> \\\"[\\\", PanelBox[" 1) ", FrameMargins->Small], \\\"]\\\"}],
> >> InterpretTemplate[TemporalData[Automatic, {{{1, 2, 1, 2, 1, 2, 1, 2, 1,
> >> 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1, 2, 1}}, {{{0``15.954589770191005,
> >> 0.01520207123587128013320057817736596917`14.129940038322594,
> >> 0.95824522046395536932862513249273766604`15.644199356725549,
> >> 1.53128564596308252148382664967984035205`15.736304825316484,
> >> 2.28962713530000690099771260582537312886`15.797207858258304,
> >> 3.28670141416927664988333023187555326092`15.839226787640209,
> >> 3.38168097695521799981621844019305806672`15.842081650549387,
> >> 4.0716904019295301685379386805431332727`15.859211783981653,
> >> 5.25370702200219072713176547011226038622`15.878918089214274,
> >> 5.91828379716574832280816964564910319058`15.88678718369098,
> >> 6.12633788645240157414249230434964341735`15.888924305967711,
> >> 6.19666658844600659408879868858704605186`15.889616516866917,
> >> 9.58526332575202981025003709494096121015`15.911492152203763,
> >> 9.8441361181069966832633195553354003832`15.912572420088354,
> >> 14.33613695082054447978910756738149487066`15.925305933162454,
> >> 14.96549983870748084202749476200455050281`15.926498477053611,
> >> 15.17014786638371663403108748271496533041`15.92686559286194,
> >> 15.36161929373388768828517022927544623659`15.927200484830422,
> >> 15.67573549317739061376647722217804251544`15.927732699101226,
> >> 15.8362986262877527919959498312816012794`15.927996832624787,
> >> 16.94396941821241069345266065715083372759`15.929686408696478,
> >> 17.04737697478590359190098510749722701209`15.929833245160726,
> >> 22.73457835309395939446096043959096018021`15.93589515332067}}}, 1, {")
> >> Discrete) ", 1}, {") Continuous) ", 1}, 1, {}}]& ], Editable->False,
> >> SelectWithContents->True, Selectable->True]\) is not a non-empty list
> >> or rectangular array of numeric quantities.\"")
> >>
> >> Now, note that the following appears to work:
> >>
> >> plot1 = ListLinePlot[data, InterpolationOrder -> 0,
> >> PlotRange -> {1, 2.1}, Ticks -> {Automatic, {1, 2, 3}},
> >> Filling -> Bottom]
> >>
> >> But when I do this:
> >>
> >> datainter =
> >> Interpolation[Normal[data] // First, InterpolationOrder -> 0]
> >> plot2 = Plot[datainter[t], {t, 0, 20}, PlotRange -> All,
> >> Filling -> Bottom]
> >>
> >> I get a different answer, and other paths yield yet other answers.
> >>
> >>
> >> What I'm looking for is for instance a function that can be called from
> >> Table[] to yield a list of equispaced samples suitable for Fourier[].
> >> The locations and interval between samples may vary as needed to keep
> >> Fourier happy - list length will be an exact power of two, and there
> >> may be zero padding added.
> >>
> >> Thanks,
> >>
> >> Joe Gwinn
> >>
> >>
> >>> Andy Ross
> >>> Wolfram Research
> >>>
> >>> On 6/15/2013 3:25 AM, Joe Gwinn wrote:
> >>>> I would like to generate some random signals for use in exploring
> >>>> signal-processing algorithms.
> >>>>
> >>>> For use as synthetic signals for the algorithm to chew upon, I'd like
> >>>> to use ContinuousMarkovProcess and TelegraphProcess with
> >>>> RandomFunction. With these, I can do statistics and plot things
> >>>> freely.
> >>>>
> >>>> What I cannot quite get is a time series ready for such indignities as
> >>>> Fourier[].
> >>>>
> >>>> Now I can manually disassemble the data structure, but I don't find a
> >>>> list of equispaced samples, I get a transition list, which is not the
> >>>> same thing.
> >>>>
> >>>> Interpolation[Normal[temporal data object] // First,
> >>>> InterpolationOrder
> >>>> -> 0] almost works, but the fine details are smeared over, even though
> >>>> InterpolationOrder -> 0 works in ListLinePlot et al without apparent
> >>>> smearing.
> >>>>
> >>>> What am I missing? It seems like Probability and Statistics has
> >>>> become
> >>>> a walled city within Mathematica. I'm hoping to find a door in the
> >>>> wall,
> >>>> rather than be forced to build by own little city one brick at a time.
> >>>>
> >>>> Joe Gwinn
> >>>>
> >>>
> >
>
>
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web