Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #10470 > unrolled thread
| Started by | Murray Eisenberg <murray@math.umass.edu> |
|---|---|
| First post | 2012-06-15 07:41 +0000 |
| Last post | 2012-07-02 09:31 +0000 |
| Articles | 10 — 2 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: Varying a constant in an ODE to Manipulate solution Murray Eisenberg <murray@math.umass.edu> - 2012-06-15 07:41 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-17 20:46 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-19 07:17 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-21 09:20 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-17 07:57 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-22 09:14 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-06-23 08:26 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-07-01 06:14 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-07-02 09:24 +0000
Re: Varying a constant in an ODE to Manipulate solution Narasimham <mathma18@hotmail.com> - 2012-07-02 09:31 +0000
| From | Murray Eisenberg <murray@math.umass.edu> |
|---|---|
| Date | 2012-06-15 07:41 +0000 |
| Subject | Re: Varying a constant in an ODE to Manipulate solution |
| Message-ID | <jreout$nqu$1@smc.vnet.net> |
It's not clear to me what you want to do. Do you want to create
3D-parametric plot of the trajectory in space -- possibly as a dynamic
with the time t as dynamic parameter? Or a 3D-parametric plot of the
trajectory over a fixed-duration time interval, but dynamic with c as
control variable?
And/or do one of those same things but do it just in 2D, selecting some
pair of the 3 components of the solution function?
On 6/13/12 4:57 AM, Narasimham wrote:
> Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> All variables or a single variable are easily pocked out from sol[c_]
> list for plotting.
> But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> sol[c_] := {x[t], y[t], z[t]} /.
> First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t, -3, 3}]]
> Manipulate[
> Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> AspectRatio -> Automatic,
> PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> Manipulate[
> Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> AspectRatio -> Automatic,
> PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> " 2 parameter Dynamic manipulation not OK"
> Manipulate[
> Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3},
> PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
--
Murray Eisenberg murrayeisenberg@gmail.com
80 Fearing Street phone 413 549-1020 (H)
Amherst, MA 01002-1912
[toc] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-17 20:46 +0000 |
| Message-ID | <jrlfnb$c2q$1@smc.vnet.net> |
| In reply to | #10470 |
On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
> It's not clear to me what you want to do.
I hope this reply clarifies, and my broader question too.
> Do you want to create 3D-parametric plot of the trajectory in space --
> possibly as a dynamic with the time t as dynamic parameter?
Yes. I can get this plot OK simply as:
Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
PlotStyle -> {Red, Thick},
AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
-0.5, 2, 0.2}]
Also I have asked in a separate but related question now under
clearance by moderators
regarding Clairaut's Equation_
How to include traces of these lines in the plot and not have them
flying in the 3space
on the Manipulate command. Call them t parameter lines as t is
continuous and c is discrete.
> And/or do one of those same things but do it just in 2D, selecting some
> pair of the 3 components of the solution function?
Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
together was needed).
> Or a 3D-parametric plot of the trajectory over a fixed-duration time in=
terval, but dynamic
> with c as control variable?
Yes, in fact that is going to be my next question now, and thanks that
you have foreseen it !
Call these lines c parameter lines as c would be the continuous
control variable and t's would be discrete.
In this case, each time dot is extruded or curvilinearly dragged
across the surface, cutting the
t lines. Bringing together action of control variables t and c, we
have a surface sol[c_,t_] which
can be computed and plotted. t and c are two parameters for this
patch.
How can this be done? I am almost sure this is doable. I shall try for
Clairaut's 2D problem and send result when done.
Regards
Narasimham
> On 6/13/12 4:57 AM, Narasimham wrote:
> > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > All variables or a single variable are easily pocked out from sol[c_]
> > list for plotting.
> > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > sol[c_] := {x[t], y[t], z[t]} /.
> > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t=
, -3, 3}]]
> > Manipulate[
> > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > Manipulate[
> > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick=
},
> > AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > " 2 parameter Dynamic manipulation not OK"
> > Manipulate[
> > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3},
> > PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> --
> Murray Eisenberg murrayeisenb...@=
gmail.com
> 80 Fearing Street phone 413 549-10=
20 (H)
> Amherst, MA 01002-1912
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-19 07:17 +0000 |
| Message-ID | <jrp92s$qbi$1@smc.vnet.net> |
| In reply to | #10510 |
On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
> > Do you want to create 3D-parametric plot of the trajectory in space --
> > possibly as a dynamic with the time t as dynamic parameter?
>
> Yes. I can get this plot OK simply as:
>
> Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]],sol[c][[2]] sol[c][[3]]], {t, -3, 3},
> PlotStyle -> {Red, Thick}, AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}],
> {c, -0.5, 2, 0.2}]
Narasimham
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-21 09:20 +0000 |
| Message-ID | <jrup0e$fkn$1@smc.vnet.net> |
| In reply to | #10510 |
On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
>
> > It's not clear to me what you want to do.
>
> I hope this reply clarifies, and my broader question too.
>
> > Do you want to create 3D-parametric plot of the trajectory in space --
> > possibly as a dynamic with the time t as dynamic parameter?
>
> Yes. I can get this plot OK simply as:
>
> Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> PlotStyle -> {Red, Thick},
> AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
> -0.5, 2, 0.2}]
>
> Also I have asked in a separate but related question now under
> clearance by moderators
> regarding Clairaut's Equation_
>
> How to include traces of these lines in the plot and not have them
> flying in the 3space
> on the Manipulate command. Call them t parameter lines as t is
> continuous and c is discrete.
>
> > And/or do one of those same things but do it just in 2D, selecting some
> > pair of the 3 components of the solution function?
>
> Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
> together was needed).
>
> > Or a 3D-parametric plot of the trajectory over a fixed-duration time in=
=
>
> terval, but dynamic
>
> > with c as control variable?
>
> Yes, in fact that is going to be my next question now, and thanks that
> you have foreseen it !
>
> Call these lines c parameter lines as c would be the continuous
> control variable and t's would be discrete.
>
> In this case, each time dot is extruded or curvilinearly dragged
> across the surface, cutting the
>
> t lines. Bringing together action of control variables t and c, we
> have a surface sol[c_,t_] which
>
> can be computed and plotted. t and c are two parameters for this
> patch.
>
> How can this be done? I am almost sure this is doable. I shall try for
> Clairaut's 2D problem and send result when done.
>
> Regards
>
> Narasimham
> > On 6/13/12 4:57 AM, Narasimham wrote:
> > > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > > All variables or a single variable are easily pocked out from sol[c_]
> > > list for plotting.
> > > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > > sol[c_] := {x[t], y[t], z[t]} /.
> > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> > > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, =
{t=
> , -3, 3}]]
> > > Manipulate[
> > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > AspectRatio -> Automatic,
> > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > Manipulate[
> > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thi=
ck=
> },
> > > AspectRatio -> Automatic,
> > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > " 2 parameter Dynamic manipulation not OK"
> > > Manipulate[
> > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3},
> > > PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> > --
> > Murray Eisenberg murrayeisenb..=
.@=
> gmail.com
> > 80 Fearing Street phone 413 549-=
10=
> 20 (H)
> > Amherst, MA 01002-1912
With some conviction I make the following suggestion.
{ a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
Boyles Law P*V = const for given const temp T becomes generalised to
gas law P V / T = const. when T is varied. The general form is more
value in scientific work.
The same case illustrates my point.
c=1 ;
CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{c,
1,1.5,.1}]
CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},Mesh-
>{15,4}]
sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]=
==2 c x[ t]-
y[t],z[0]==2},{x,y,z},{t,-3,3}]];
DIFF1=
Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio-
>Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
DIFF2=
ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
{t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio-
>Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
(* the [% ] above would certainly produce error diagnostics as of
now!! *)
Is it possible to push up or upgrade a constant (along with a chosen
domain) into a variable, from state X1 ( with one independent variable
t ) to CL2 ( with two independent variables t and c) thereby
spreading/dragging/extruding a line into a surface?
It is possible to generalize both in closed form (analytically
definable functions )and in differential form (for smooth continuous
manifolds ) with automatically generated boundary conditions added ,
from surfaces to solids/volumes and further on to 4D objects .. by
proper assembly or stacking into 3- space objects.
It is possible to implement a form in CL2 for every form CL1 to
accommodate c seeding among determining differential equations as well
as in Boundary Conditions as an add-on/ generalization function by
variation of parameter c, sharing same boundary conditions between
them.
The manner of range specification in code available to the user is to
put c and t ranges simply together inside square bracket rather than
on either side of the closing square bracket.
So I tend to suggest/ request for making a provision, incorporating
whatever it takes to realize it, to enable plot of DIFF2 without
error diagnostics and output the same DIFF1 as DIFF2 but now as a
surface .
The logic is the same, to me at least, in such a result depiction. The
DIFF2 should show _a surface_ just as CL2 does.
This may seem too long drawn out, A request for its acceptance or
implementation in further Mathematica development may look a tall
order, I took liberty to make the comment. Please comment about your
view and problems involved in what looks as a crass generalization. Or
a simple code to make it routinely available be please indicated.
Regards
Narasimham
sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]=
==2 c x[ t]-
y[t],z[0]==2},{x,y,z},{t,-3,3}]];
DIFF1=
Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio-
>Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
DIFF2=
ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
{t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio-
>Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
(* the % would certainly produce error diagnostics!! *)
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-17 07:57 +0000 |
| Message-ID | <jrk2kd$8k1$1@smc.vnet.net> |
| In reply to | #10470 |
On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
> It's not clear to me what you want to do.
I hope this reply clarifies, and my broader question too.
> Do you want to create 3D-parametric plot of the trajectory in space --
> possibly as a dynamic with the time t as dynamic parameter?
Yes. I can get this plot OK simply as:
Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
PlotStyle -> {Red, Thick},
AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
-0.5, 2, 0.2}]
Also I have asked in a separate but related question now under
clearance by moderators
regarding Clairaut's Equation_
How to include traces of these lines in the plot and not have them
flying in the 3space
on the Manipulate command. Call them t parameter lines as t is
continuous and c is discrete.
> And/or do one of those same things but do it just in 2D, selecting some
> pair of the 3 components of the solution function?
Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
together was needed).
> Or a 3D-parametric plot of the trajectory over a fixed-duration time in=
terval, but dynamic
> with c as control variable?
Yes, in fact that is going to be my next question now, and thanks that
you have foreseen it !
Call these lines c parameter lines as c would be the continuous
control variable and t's would be discrete.
In this case, each time dot is extruded or curvilinearly dragged
across the surface, cutting the
t lines. Bringing together action of control variables t and c, we
have a surface sol[c_,t_] which
can be computed and plotted. t and c are two parameters for this
patch.
How can this be done? I am almost sure this is doable. I shall try for
Clairaut's 2D problem and send result when done.
Regards
Narasimham
> On 6/13/12 4:57 AM, Narasimham wrote:
> > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > All variables or a single variable are easily pocked out from sol[c_]
> > list for plotting.
> > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > sol[c_] := {x[t], y[t], z[t]} /.
> > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t=
, -3, 3}]]
> > Manipulate[
> > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > Manipulate[
> > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick=
},
> > AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > " 2 parameter Dynamic manipulation not OK"
> > Manipulate[
> > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3},
> > PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> --
> Murray Eisenberg murrayeisenb...@=
gmail.com
> 80 Fearing Street phone 413 549-10=
20 (H)
> Amherst, MA 01002-1912
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-22 09:14 +0000 |
| Message-ID | <js1d10$m8f$1@smc.vnet.net> |
| In reply to | #10470 |
On Jun 21, 2:20 pm, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
>
>
>
>
>
>
>
>
>
>
>
> > On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
>
> > > It's not clear to me what you want to do.
>
> > I hope this reply clarifies, and my broader question too.
>
> > > Do you want to create 3D-parametric plot of the trajectory in space --
> > > possibly as a dynamic with the time t as dynamic parameter?
>
> > Yes. I can get this plot OK simply as:
>
> > Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> > PlotStyle -> {Red, Thick},
> > AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
> > -0.5, 2, 0.2}]
>
> > Also I have asked in a separate but related question now under
> > clearance by moderators
> > regarding Clairaut's Equation_
>
> > How to include traces of these lines in the plot and not have them
> > flying in the 3space
> > on the Manipulate command. Call them t parameter lines as t is
> > continuous and c is discrete.
>
> > > And/or do one of those same things but do it just in 2D, selecting some
> > > pair of the 3 components of the solution function?
>
> > Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
> > together was needed).
>
> > > Or a 3D-parametric plot of the trajectory over a fixed-duration time in
>
> > terval, but dynamic
>
> > > with c as control variable?
>
> > Yes, in fact that is going to be my next question now, and thanks that
> > you have foreseen it !
>
> > Call these lines c parameter lines as c would be the continuous
> > control variable and t's would be discrete.
>
> > In this case, each time dot is extruded or curvilinearly dragged
> > across the surface, cutting the
>
> > t lines. Bringing together action of control variables t and c, we
> > have a surface sol[c_,t_] which
>
> > can be computed and plotted. t and c are two parameters for this
> > patch.
>
> > How can this be done? I am almost sure this is doable. I shall try for
> > Clairaut's 2D problem and send result when done.
>
> > Regards
>
> > Narasimham
> > > On 6/13/12 4:57 AM, Narasimham wrote:
> > > > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > > > All variables or a single variable are easily pocked out from sol[c_]
> > > > list for plotting.
> > > > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > > > sol[c_] := {x[t], y[t], z[t]} /.
> > > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> > > > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t, -3, 3}]]
> > > > Manipulate[
> > > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > Manipulate[
> > > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > " 2 parameter Dynamic manipulation not OK"
> > > > Manipulate[
> > > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3},
> > > > PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> > > --
> > > Murray Eisenberg murrayeisenb .. > .@gmail.com
> > > 80 Fearing Street phone 413 549-1020 (H)
> > > Amherst, MA 01002-1912
>
> With some conviction I make the following suggestion.
>
> { a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
> Boyles Law P*V = const for given const temp T becomes generalised to
> gas law P V / T = const. when T is varied. The general form is more
> value in scientific work.
>
> The same case illustrates my point.
>
> c=1 ;
> CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
> 0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{c,
> 1,1.5,.1}]
> CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},Mesh->{15,4}]
>
> sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]==2 c x[ t]-
> y[t],z[0]==2},{x,y,z},{t,-3,3}]];
>
> DIFF1=
> Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> DIFF2=
> ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
> {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,PlotRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> (* the [% ] above would certainly produce error diagnostics as of
> now!! *)
>
> Is it possible to push up or upgrade a constant (along with a chosen
> domain) into a variable, from state X1 ( with one independent variable
> t ) to CL2 ( with two independent variables t and c) thereby
> spreading/dragging/extruding a line into a surface?
>
> It is possible to generalize both in closed form (analytically
> definable functions )and in differential form (for smooth continuous
> manifolds ) with automatically generated boundary conditions added ,
> from surfaces to solids/volumes and further on to 4D objects .. by
> proper assembly or stacking into 3- space objects.
>
> It is possible to implement a form in CL2 for every form CL1 to
> accommodate c seeding among determining differential equations as well
> as in Boundary Conditions as an add-on/ generalization function by
> variation of parameter c, sharing same boundary conditions between
> them.
>
> The manner of range specification in code available to the user is to
> put c and t ranges simply together inside square bracket rather than
> on either side of the closing square bracket.
>
> So I tend to suggest/ request for making a provision, incorporating
> whatever it takes to realize it, to enable plot of DIFF2 without
> error diagnostics and output the same DIFF1 as DIFF2 but now as a
> surface .
>
> The logic is the same, to me at least, in such a result depiction. The
> DIFF2 should show _a surface_ just as CL2 does.
>
> This may seem too long drawn out, A request for its acceptance or
> implementation in further Mathematica development may look a tall
> order, I took liberty to make the comment. Please comment about your
> view and problems involved in what looks as a crass generalization. Or
> a simple code to make it routinely available be please indicated.
>
> Regards
> Narasimham
>
> sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]=
=
> ==2 c x[ t]-
> y[t],z[0]==2},{x,y,z},{t,-3,3}]];
> DIFF1=
> Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,Plo=
tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> DIFF2=
> ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
> {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,Pl=
otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> (* the % would certainly produce error diagnostics!! *)
If DIFF2 cannot work without error diagnostics (regarding pushing
domain of c inclusively into square brackets together with domain of
t, please indicate dynamic adapter code/module lines that may be
appended so that one need not write own code lines with Tooltip or
whatever it takes to compute/display the generalized function [t,c].
Took liberty of suggesting this as the prospect of computing and
viewing generalized functions (numerically at least to begin with)
whereby multiple parameters can get embedded even into a muti-
dimensional spaces by the power of functional depiction in
Mathematica .. is indeed exciting.
Regards
Narasimham
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-06-23 08:26 +0000 |
| Message-ID | <js3uk2$10i$1@smc.vnet.net> |
| In reply to | #10470 |
On Jun 21, 2:20 pm, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
>
>
>
>
>
>
>
>
>
>
>
> > On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
>
> > > It's not clear to me what you want to do.
>
> > I hope this reply clarifies, and my broader question too.
>
> > > Do you want to create 3D-parametric plot of the trajectory in space --
> > > possibly as a dynamic with the time t as dynamic parameter?
>
> > Yes. I can get this plot OK simply as:
>
> > Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> > PlotStyle -> {Red, Thick},
> > AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
> > -0.5, 2, 0.2}]
>
> > Also I have asked in a separate but related question now under
> > clearance by moderators
> > regarding Clairaut's Equation_
>
> > How to include traces of these lines in the plot and not have them
> > flying in the 3space
> > on the Manipulate command. Call them t parameter lines as t is
> > continuous and c is discrete.
>
> > > And/or do one of those same things but do it just in 2D, selecting some
> > > pair of the 3 components of the solution function?
>
> > Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
> > together was needed).
>
> > > Or a 3D-parametric plot of the trajectory over a fixed-duration time in
>
> > terval, but dynamic
>
> > > with c as control variable?
>
> > Yes, in fact that is going to be my next question now, and thanks that
> > you have foreseen it !
>
> > Call these lines c parameter lines as c would be the continuous
> > control variable and t's would be discrete.
>
> > In this case, each time dot is extruded or curvilinearly dragged
> > across the surface, cutting the
>
> > t lines. Bringing together action of control variables t and c, we
> > have a surface sol[c_,t_] which
>
> > can be computed and plotted. t and c are two parameters for this
> > patch.
>
> > How can this be done? I am almost sure this is doable. I shall try for
> > Clairaut's 2D problem and send result when done.
>
> > Regards
>
> > Narasimham
> > > On 6/13/12 4:57 AM, Narasimham wrote:
> > > > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > > > All variables or a single variable are easily pocked out from sol[c_]
> > > > list for plotting.
> > > > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > > > sol[c_] := {x[t], y[t], z[t]} /.
> > > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] == 0,
> > > > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t, -3, 3}]]
> > > > Manipulate[
> > > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > Manipulate[
> > > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > " 2 parameter Dynamic manipulation not OK"
> > > > Manipulate[
> > > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3}=
,
> > > > PlotStyle -> {Green, Thick}, AspectRatio -> Automatic,
> > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> > > --
> > > Murray Eisenberg murrayeisenb=
..=
> .@=
> > gmail.com
> > > 80 Fearing Street phone 413 54=
9-=
> 10=
> > 20 (H)
> > > Amherst, MA 01002-1912
>
> With some conviction I make the following suggestion.
>
> { a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
> Boyles Law P*V = const for given const temp T becomes generalised to
> gas law P V / T = const. when T is varied. The general form is more
> value in scientific work.
>
> The same case illustrates my point.
>
> c=1 ;
> CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
> 0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{c,
> 1,1.5,.1}]
> CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},Mesh-=
>{15,4}]
>
> sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]=
=
> ==2 c x[ t]-
> y[t],z[0]==2},{x,y,z},{t,-3,3}]];
>
> DIFF1=
> Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,Plo=
tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> DIFF2=
> ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
> {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,Pl=
otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> (* the [% ] above would certainly produce error diagnostics as of
> now!! *)
>
> Is it possible to push up or upgrade a constant (along with a chose=
n
> domain) into a variable, from state X1 ( with one independent variable
> t ) to CL2 ( with two independent variables t and c) thereby
> spreading/dragging/extruding a line into a surface?
>
> It is possible to generalize both in closed form (analytically
> definable functions )and in differential form (for smooth continuous
> manifolds ) with automatically generated boundary conditions added ,
> from surfaces to solids/volumes and further on to 4D objects .. by
> proper assembly or stacking into 3- space objects.
>
> It is possible to implement a form in CL2 for every form CL1 to
> accommodate c seeding among determining differential equations as well
> as in Boundary Conditions as an add-on/ generalization function by
> variation of parameter c, sharing same boundary conditions between
> them.
>
> The manner of range specification in code available to the user is to
> put c and t ranges simply together inside square bracket rather than
> on either side of the closing square bracket.
>
> So I tend to suggest/ request for making a provision, incorporating
> whatever it takes to realize it, to enable plot of DIFF2 without
> error diagnostics and output the same DIFF1 as DIFF2 but now as a
> surface .
>
> The logic is the same, to me at least, in such a result depiction. The
> DIFF2 should show _a surface_ just as CL2 does.
>
> This may seem too long drawn out, A request for its acceptance or
> implementation in further Mathematica development may look a tall
> order, I took liberty to make the comment. Please comment about your
> view and problems involved in what looks as a crass generalization. Or
> a simple code to make it routinely available be please indicated.
>
> Regards
> Narasimham
>
> sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[t]=
=
> ==2 c x[ t]-
> y[t],z[0]==2},{x,y,z},{t,-3,3}]];
> DIFF1=
> Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,Plo=
tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> DIFF2=
> ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
> {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,Pl=
otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> (* the % would certainly produce error diagnostics!! *)tRange->{{0,5},{-2=
.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
> LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
> DIFF2=
> ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }],
> {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,Pl=
=
otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
> >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
> (* the % would certainly produce error diagnostics!! *)
If DIFF2 cannot work without error diagnostics (regarding pushing
domain of c inclusively into square brackets together with domain of
t), please indicate a dynamic adapter code module lines that may be
appended so that one need not write own code lines with Tooltip or
whatever it takes to compute/display the generalized function [t,c].
Took liberty to suggest this as the prospect of computing and
viewing generalized functions (numerically at least to begin with)
whereby multiple constants can get embedded into 3-space and
even into a muti-dimensional spaces by the power of functional
definition flexibility and graphical depiction in Mathematica, is
is indeed exciting.
Regards
Narasimham
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-07-01 06:14 +0000 |
| Message-ID | <jsops6$124$1@smc.vnet.net> |
| In reply to | #10606 |
On Jun 23, 1:26 pm, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 21, 2:20 pm, Narasimham <mathm...@hotmail.com> wrote:
>
>
>
>
>
>
>
> > On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
>
> > > On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote:
>
> > > > It's not clear to me what you want to do.
>
> > > I hope this reply clarifies, and my broader question too.
>
> > > > Do you want to create 3D-parametric plot of the trajectory in space--
> > > > possibly as a dynamic with the time t as dynamic parameter?
>
> > > Yes. I can get this plot OK simply as:
>
> > > Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> > > PlotStyle -> {Red, Thick},
> > > AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}], {c,
> > > -0.5, 2, 0.2}]
>
> > > Also I have asked in a separate but related question now under
> > > clearance by moderators
> > > regarding Clairaut's Equation_
>
> > > How to include traces of these lines in the plot and not have them
> > > flying in the 3space
> > > on the Manipulate command. Call them t parameter lines as t is
> > > continuous and c is discrete.
>
> > > > And/or do one of those same things but do it just in 2D, selecting one
> > > > pair of the 3 components of the solution function?
>
> > > Yes, that was my query. Bob Hanlon pointed out my error. (Evaluating
> > > together was needed).
>
> > > > Or a 3D-parametric plot of the trajectory over a fixed-duration time in
>
> > > terval, but dynamic
>
> > > > with c as control variable?
>
> > > Yes, in fact that is going to be my next question now, and thanks that
> > > you have foreseen it !
>
> > > Call these lines c parameter lines as c would be the continuous
> > > control variable and t's would be discrete.
>
> > > In this case, each time dot is extruded or curvilinearly dragged
> > > across the surface, cutting the
>
> > > t lines. Bringing together action of control variables t and c, we
> > > have a surface sol[c_,t_] which
>
> > > can be computed and plotted. t and c are two parameters for this
> > > patch.
>
> > > How can this be done? I am almost sure this is doable. I shall try for
> > > Clairaut's 2D problem and send result when done.
>
> > > Regards
>
> > > Narasimham
> > > > On 6/13/12 4:57 AM, Narasimham wrote:
> > > > > Same topic is continued. Thanks to Murray Eisenberg and Bob Hanlon
>
> > > > > All variables or a single variable are easily pocked out from sol[c_]
> > > > > list for plotting.
> > > > > But how to pick out two out of them for ParametricPlot ( 2D) ?
>
> > > > > sol[c_] := {x[t], y[t], z[t]} /.
> > > > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] ==
0,
> > > > > y[0] == 1/(1 + c), x'[t] == t, x[0] == c^2,
> > > > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y, z}, {t, -3, 3}]]
> > > > > Manipulate[
> > > > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > > AspectRatio -> Automatic,
> > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > > Manipulate[
> > > > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Red, Thick},
> > > > > AspectRatio -> Automatic,
> > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
> > > > > " 2 parameter Dynamic manipulation not OK"
> > > > > Manipulate[
> > > > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3, 3}
> ,
> > > > > PlotStyle -> {Green, Thick}, AspectRatio -> Automati=
c,
> > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}]
>
> > > > --
> > > > Murray Eisenberg murrayeise=
nb=
> ..=
> > .@=
> > > gmail.com
> > > > 80 Fearing Street phone 413 =
54=
> 9-=
> > 10=
> > > 20 (H)
> > > > Amherst, MA 01002-1912
>
> > With some conviction I make the following suggestion.
>
> > { a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
> > Boyles Law P*V = const for given const temp T becomes generalised to
> > gas law P V / T = const. when T is varied. The general form is mor=
e
> > value in scientific work.
>
> > The same case illustrates my point.
>
> > c=1 ;
> > CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
> > 0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{c,
> > 1,1.5,.1}]
> > CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},Mes=
h-=
> >{15,4}]
>
> > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[=
t]=
> =
> > ==2 c x[ t]-
> > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
>
> > DIFF1=
> > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,P=
lo=
>
> tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5},=
{-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > DIFF2=
> > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }]=
,
> > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,=
Pl=
>
> otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
>
>
>
>
>
>
> > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> > (* the [% ] above would certainly produce error diagnostics as of
> > now!! *)
>
> > Is it possible to push up or upgrade a constant (along with a cho=
se=
> n
> > domain) into a variable, from state X1 ( with one independent variable
> > t ) to CL2 ( with two independent variables t and c) thereby
> > spreading/dragging/extruding a line into a surface?
>
> > It is possible to generalize both in closed form (analytically
> > definable functions )and in differential form (for smooth continuous
> > manifolds ) with automatically generated boundary conditions added ,
> > from surfaces to solids/volumes and further on to 4D objects .. by
> > proper assembly or stacking into 3- space objects.
>
> > It is possible to implement a form in CL2 for every form CL1 to
> > accommodate c seeding among determining differential equations as well
> > as in Boundary Conditions as an add-on/ generalization function by
> > variation of parameter c, sharing same boundary conditions between
> > them.
>
> > The manner of range specification in code available to the user is t=
o
> > put c and t ranges simply together inside square bracket rather than
> > on either side of the closing square bracket.
>
> > So I tend to suggest/ request for making a provision, incorporating
> > whatever it takes to realize it, to enable plot of DIFF2 without
> > error diagnostics and output the same DIFF1 as DIFF2 but now as a
> > surface .
>
> > The logic is the same, to me at least, in such a result depiction. The
> > DIFF2 should show _a surface_ just as CL2 does.
>
> > This may seem too long drawn out, A request for its acceptance or
> > implementation in further Mathematica development may look a tall
> > order, I took liberty to make the comment. Please comment about your
> > view and problems involved in what looks as a crass generalization. Or
> > a simple code to make it routinely available be please indicated.
>
> > Regards
> > Narasimham
>
> > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z'[=
t]=
> =
> > ==2 c x[ t]-
> > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
> > DIFF1=
> > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic,P=
lo=
>
> tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5},=
{-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > DIFF2=
> > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }]=
,
> > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,=
Pl=
>
> otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5}=
, {-2.5,2.5}}]
>
> > (* the % would certainly produce error diagnostics!! *)tRange->{{0,5},{=
-2=
>
> .5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotL=
abel->Style[Framed[ "c PARAMETRIC
> > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
> > DIFF2=
> > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] }]=
,
> > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automatic,=
Pl=
>
> =
>
> otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
> > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
> > (* the % would certainly produce error diagnostics!! *)
>
> If DIFF2 cannot work without error diagnostics (regarding pushing
> domain of c inclusively into square brackets together with domain of
> t), please indicate a dynamic adapter code module lines that may be
> appended so that one need not write own code lines with Tooltip or
> whatever it takes to compute/display the generalized function [t,c].
>
> Took liberty to suggest this as the prospect of computing and
> viewing generalized functions (numerically at least to begin with)
> whereby multiple constants can get embedded into 3-space and
> even into a muti-dimensional spaces by the power of functional
> definition flexibility and graphical depiction in Mathematica, is
> is indeed exciting.
>
> Regards
> Narasimham
The suggestion actually is for solid modeling,could not express it
earlier.
To appreciate the invariantly fixing up any one among three variables
and making the
three component surfaces which can be morphed/ Manipulated/ clubbed
back/integrated
in 3D solid modelling,I have written this code ( fwiw, instructional)
in mathematical solid
parametric 3D modeling thus:
c = 1.2; " 3 PARAM DECOMPN THICK CYL Solid modelling "
" Take two out of 3 parameters {a,t,v } at a time for surface \
generation and
one out three parameters at a time for single generating parameter \
line. "
Clear[a, t, v] ;
" vary v & t. It makes a cylinder surface, Dilatation of each cyl \
surface at a =1 generates a solid. "
a = 1.;
aa = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
2 Pi}, { v, 0, 2 Pi}, Mesh -> {18, 4}] ;
at = ParametricPlot3D[ {a Cos[t + 2.5], c t , a Sin[t + 2.5] }, {t,
0, 2 Pi}, PlotStyle -> {Orange, Thick}] ;
Clear[a, t, v] ;
" vary a & t. It makes a helical fin surface, entire fin rigid body
\
Rotation at v = Pi /2 generates a solid. "
v = Pi/2. ;
vv = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
2 Pi}, { a, 1, 1.6}, Mesh -> {18, 4}] ;
va = ParametricPlot3D[ {a Cos[4 + v], c 4. , a Sin[4 + v] }, { a,
1, 1.6}, PlotStyle -> {Orange, Thick}] ;
Clear[a, t, v] ;
" vary v & a. It makes an annulus surface , entire annulus \
Translation at t = Pi generates a solid. "
t = Pi ;
tt = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, { v, 0,
2 Pi}, {a, 1, 1.6}, Mesh -> {18, 4}] ;
tv = ParametricPlot3D[ {1.25 Cos[t + v], c t ,
1.25 Sin[t + v] }, { v, 0, 2 Pi}, PlotStyle -> {Orange, Thick}] ;
Surfs = Show[{aa, vv, tt}, PlotRange -> All, Axes -> None,
Boxed -> False]
Lines = Show[{at, va, tv}, PlotRange -> All, Axes -> None,
Boxed -> False]
Show[Surfs, Lines]
I hope the need for development of general command in solid
modeling is clearer from above closed parametric form example.
Regards
Narasimham
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-07-02 09:24 +0000 |
| Message-ID | <jsrpcs$d0g$1@smc.vnet.net> |
| In reply to | #10470 |
On Jul 1, 11:14 am, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 23, 1:26 pm, Narasimham <mathm...@hotmail.com> wrote:> On Jun 21, =
2:20 pm, Narasimham <mathm...@hotmail.com> wrote:
>
> > > On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
>
> > > > On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote=
:
>
> > > > > It's not clear to me what you want to do.
>
> > > > I hope this reply clarifies, and my broader question too.
>
> > > > > Do you want to create 3D-parametric plot of the trajectory in spa=
ce--
> > > > > possibly as a dynamic with the time t as dynamic parameter?
>
> > > > Yes. I can get this plot OK simply as:
>
> > > > Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> > > > PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}],=
{c,
> > > > -0.5, 2, 0.2}]
>
> > > > Also I have asked in a separate but related question now under
> > > > clearance by moderators
> > > > regarding Clairaut's Equation_
>
> > > > How to include traces of these lines in the plot and not have them
> > > > flying in the 3space
> > > > on the Manipulate command. Call them t parameter lines as t is
> > > > continuous and c is discrete.
>
> > > > > And/or do one of those same things but do it just in 2D, selectin=
g one
> > > > > pair of the 3 components of the solution function?
>
> > > > Yes, that was my query. Bob Hanlon pointed out my error. (Evaluatin=
g
> > > > together was needed).
>
> > > > > Or a 3D-parametric plot of the trajectory over a fixed-duration t=
ime in
>
> > > > terval, but dynamic
>
> > > > > with c as control variable?
>
> > > > Yes, in fact that is going to be my next question now, and thanks t=
hat
> > > > you have foreseen it !
>
> > > > Call these lines c parameter lines as c would be the continuous
> > > > control variable and t's would be discrete.
>
> > > > In this case, each time dot is extruded or curvilinearly dragged
> > > > across the surface, cutting the
>
> > > > t lines. Bringing together action of control variables t and c, we
> > > > have a surface sol[c_,t_] which
>
> > > > can be computed and plotted. t and c are two parameters for this
> > > > patch.
>
> > > > How can this be done? I am almost sure this is doable. I shall try =
for
> > > > Clairaut's 2D problem and send result when done.
>
> > > > Regards
>
> > > > Narasimham
> > > > > On 6/13/12 4:57 AM, Narasimham wrote:
> > > > > > Same topic is continued. Thanks to Murray Eisenberg and Bob Han=
lon
>
> > > > > > All variables or a single variable are easily pocked out from s=
ol[c_]
> > > > > > list for plotting.
> > > > > > But how to pick out two out of them for ParametricPlot ( 2D)=
?
>
> > > > > > sol[c_] := {x[t], y[t], z[t]} /.
> > > > > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] ==
=
> 0,
> > > > > > y[0] == 1/(1 + c), x'[t] == t, x[0] == =
c^2,
> > > > > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y=
, z}, {t, -3, 3}]]
> > > > > > Manipulate[
> > > > > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Th=
ick},
> > > > > > AspectRatio -> Automatic,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
> > > > > > Manipulate[
> > > > > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Re=
d, Thick},
> > > > > > AspectRatio -> Automatic,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
> > > > > > " 2 parameter Dynamic manipulation not OK"
> > > > > > Manipulate[
> > > > > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3=
, 3}
> > ,
> > > > > > PlotStyle -> {Green, Thick}, AspectRatio -> Automa=
ti=
> c,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
>
> > > > > --
> > > > > Murray Eisenberg murrayei=
se=
> nb=
> > ..=
> > > .@=
> > > > gmail.com
> > > > > 80 Fearing Street phone 41=
3 =
> 54=
> > 9-=
> > > 10=
> > > > 20 (H)
> > > > > Amherst, MA 01002-1912
>
> > > With some conviction I make the following suggestion.
>
> > > { a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
> > > Boyles Law P*V = const for given const temp T becomes generalised t=
o
> > > gas law P V / T = const. when T is varied. The general form is m=
or=
> e
> > > value in scientific work.
>
> > > The same case illustrates my point.
>
> > > c=1 ;
> > > CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
> > > 0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{=
c,
> > > 1,1.5,.1}]
> > > CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},M=
es=
> h-=
> > >{15,4}]
>
> > > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z=
'[=
> t]=
> > =
> > > ==2 c x[ t]-
> > > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
>
> > > DIFF1=
> > > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic=
,P=
> lo=
>
> > tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5=
},=
>
> {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
> > > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> > > (* the [% ] above would certainly produce error diagnostics as of
> > > now!! *)
>
> > > Is it possible to push up or upgrade a constant (along with a c=
ho=
> se=
> > n
> > > domain) into a variable, from state X1 ( with one independent variabl=
e
> > > t ) to CL2 ( with two independent variables t and c) thereby
> > > spreading/dragging/extruding a line into a surface?
>
> > > It is possible to generalize both in closed form (analytically
> > > definable functions )and in differential form (for smooth continuo=
us
> > > manifolds ) with automatically generated boundary conditions added ,
> > > from surfaces to solids/volumes and further on to 4D objects .. by
> > > proper assembly or stacking into 3- space objects.
>
> > > It is possible to implement a form in CL2 for every form CL1 to
> > > accommodate c seeding among determining differential equations as wel=
l
> > > as in Boundary Conditions as an add-on/ generalization function by
> > > variation of parameter c, sharing same boundary conditions between
> > > them.
>
> > > The manner of range specification in code available to the user is=
t=
> o
> > > put c and t ranges simply together inside square bracket rather than
> > > on either side of the closing square bracket.
>
> > > So I tend to suggest/ request for making a provision, incorporating
> > > whatever it takes to realize it, to enable plot of DIFF2 without
> > > error diagnostics and output the same DIFF1 as DIFF2 but now as a
> > > surface .
>
> > > The logic is the same, to me at least, in such a result depiction. Th=
e
> > > DIFF2 should show _a surface_ just as CL2 does.
>
> > > This may seem too long drawn out, A request for its acceptance or
> > > implementation in further Mathematica development may look a tall
> > > order, I took liberty to make the comment. Please comment about your
> > > view and problems involved in what looks as a crass generalization. O=
r
> > > a simple code to make it routinely available be please indicated.
>
> > > Regards
> > > Narasimham
>
> > > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z=
'[=
> t]=
> > =
> > > ==2 c x[ t]-
> > > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
> > > DIFF1=
> > > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic=
,P=
> lo=
>
> > tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5=
},=
>
> {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.=
5}=
> , {-2.5,2.5}}]
>
> > > (* the % would certainly produce error diagnostics!! *)tRange->{{0,5}=
,{=
> -2=
>
> > .5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},Plo=
tL=
>
> abel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > =
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
> > > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
> > > (* the % would certainly produce error diagnostics!! *)
>
> > If DIFF2 cannot work without error diagnostics (regarding pushing
> > domain of c inclusively into square brackets together with domain of
> > t), please indicate a dynamic adapter code module lines that may be
> > appended so that one need not write own code lines with Tooltip or
> > whatever it takes to compute/display the generalized function [t,c].
>
> > Took liberty to suggest this as the prospect of computing and
> > viewing generalized functions (numerically at least to begin with)
> > whereby multiple constants can get embedded into 3-space and
> > even into a muti-dimensional spaces by the power of functional
> > definition flexibility and graphical depiction in Mathematica, is
> > is indeed exciting.
>
> > Regards
> > Narasimham
>
> The suggestion actually is for solid modeling,could not express it
> earlier.
>
> To appreciate the invariantly fixing up any one among three variables
> and making the
> three component surfaces which can be morphed/ Manipulated/ clubbed
> back/integrated
> in 3D solid modelling,I have written this code ( fwiw, instructional)
> in mathematical solid
> parametric 3D modeling thus:
>
> c = 1.2; " 3 PARAM DECOMPN THICK CYL Solid modelling "
> " Take two out of 3 parameters {a,t,v } at a time for surface \
> generation and
> one out three parameters at a time for single generating parameter =
\
> line. "
> Clear[a, t, v] ;
> " vary v & t. It makes a cylinder surface, Dilatation of each cyl \
> surface at a =1 generates a solid. "
> a = 1.;
> aa = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
> 2 Pi}, { v, 0, 2 Pi}, Mesh -> {18, 4}] ;
> at = ParametricPlot3D[ {a Cos[t + 2.5], c t , a Sin[t + 2.5] }, {t,
> 0, 2 Pi}, PlotStyle -> {Orange, Thick}] ;
> Clear[a, t, v] ;
> " vary a & t. It makes a helical fin surface, entire fin rigid body
> \
> Rotation at v = Pi /2 generates a solid. "
> v = Pi/2. ;
> vv = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
> 2 Pi}, { a, 1, 1.6}, Mesh -> {18, 4}] ;
> va = ParametricPlot3D[ {a Cos[4 + v], c 4. , a Sin[4 + v] }, {=
a,
> 1, 1.6}, PlotStyle -> {Orange, Thick}] ;
> Clear[a, t, v] ;
> " vary v & a. It makes an annulus surface , entire annulus \
> Translation at t = Pi generates a solid. "
> t = Pi ;
> tt = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, { v, 0,
> 2 Pi}, {a, 1, 1.6}, Mesh -> {18, 4}] ;
> tv = ParametricPlot3D[ {1.25 Cos[t + v], c t ,
> 1.25 Sin[t + v] }, { v, 0, 2 Pi}, PlotStyle -> {Orange, Thick}=
] ;
> Surfs = Show[{aa, vv, tt}, PlotRange -> All, Axes -> None,
> Boxed -> False]
> Lines = Show[{at, va, tv}, PlotRange -> All, Axes -> None,
> Boxed -> False]
> Show[Surfs, Lines]
>
> I hope the need for development of general command in solid
> modeling is clearer from above closed parametric form example.
>
> Regards
> Narasimham
I imagined a 3 parameter inclusive command like :) :
Manipulate[ ParametricSolid[ { f[x[u, v, w], y[u, v, w], z[u, v,
w]] }, {u, 0.1, 3}, {v, .8, 1.2}, {| w, -3, 3, .2 |},Mesh -> {20, 20,
5}, PlotRange -> {{-0, 20}, {-10, 10}, {-10, 10}}], Appearance ->
"Labeled", ControlPlacement -> Left]
where domain of w may be indicated with a special symbol to indicate
its discrete character, u and v being continuous.
Narasimham
[toc] | [prev] | [next] | [standalone]
| From | Narasimham <mathma18@hotmail.com> |
|---|---|
| Date | 2012-07-02 09:31 +0000 |
| Message-ID | <jsrpq8$d4p$1@smc.vnet.net> |
| In reply to | #10470 |
On Jul 1, 11:14 am, Narasimham <mathm...@hotmail.com> wrote:
> On Jun 23, 1:26 pm, Narasimham <mathm...@hotmail.com> wrote:> On Jun 21, =
2:20 pm, Narasimham <mathm...@hotmail.com> wrote:
>
> > > On Jun 18, 1:46 am, Narasimham <mathm...@hotmail.com> wrote:
>
> > > > On Jun 15, 12:41 pm, Murray Eisenberg <mur...@math.umass.edu> wrote=
:
>
> > > > > It's not clear to me what you want to do.
>
> > > > I hope this reply clarifies, and my broader question too.
>
> > > > > Do you want to create 3D-parametric plot of the trajectory in spa=
ce--
> > > > > possibly as a dynamic with the time t as dynamic parameter?
>
> > > > Yes. I can get this plot OK simply as:
>
> > > > Manipulate[ParametricPlot3D[Evaluate[sol[c][[1]]], {t, -3, 3},
> > > > PlotStyle -> {Red, Thick},
> > > > AspectRatio -> Automatic, PlotRange -> {{-3, 3}, {-10, 10}}],=
{c,
> > > > -0.5, 2, 0.2}]
>
> > > > Also I have asked in a separate but related question now under
> > > > clearance by moderators
> > > > regarding Clairaut's Equation_
>
> > > > How to include traces of these lines in the plot and not have them
> > > > flying in the 3space
> > > > on the Manipulate command. Call them t parameter lines as t is
> > > > continuous and c is discrete.
>
> > > > > And/or do one of those same things but do it just in 2D, selectin=
g one
> > > > > pair of the 3 components of the solution function?
>
> > > > Yes, that was my query. Bob Hanlon pointed out my error. (Evaluatin=
g
> > > > together was needed).
>
> > > > > Or a 3D-parametric plot of the trajectory over a fixed-duration t=
ime in
>
> > > > terval, but dynamic
>
> > > > > with c as control variable?
>
> > > > Yes, in fact that is going to be my next question now, and thanks t=
hat
> > > > you have foreseen it !
>
> > > > Call these lines c parameter lines as c would be the continuous
> > > > control variable and t's would be discrete.
>
> > > > In this case, each time dot is extruded or curvilinearly dragged
> > > > across the surface, cutting the
>
> > > > t lines. Bringing together action of control variables t and c, we
> > > > have a surface sol[c_,t_] which
>
> > > > can be computed and plotted. t and c are two parameters for this
> > > > patch.
>
> > > > How can this be done? I am almost sure this is doable. I shall try =
for
> > > > Clairaut's 2D problem and send result when done.
>
> > > > Regards
>
> > > > Narasimham
> > > > > On 6/13/12 4:57 AM, Narasimham wrote:
> > > > > > Same topic is continued. Thanks to Murray Eisenberg and Bob Han=
lon
>
> > > > > > All variables or a single variable are easily pocked out from s=
ol[c_]
> > > > > > list for plotting.
> > > > > > But how to pick out two out of them for ParametricPlot ( 2D)=
?
>
> > > > > > sol[c_] := {x[t], y[t], z[t]} /.
> > > > > > First[NDSolve[{y''[t] + Sin[y[t]/c] == 0, y'[0] ==
=
> 0,
> > > > > > y[0] == 1/(1 + c), x'[t] == t, x[0] == =
c^2,
> > > > > > z'[t] == 2 c x[t] - y[t], z[0] == 2}, {x, y=
, z}, {t, -3, 3}]]
> > > > > > Manipulate[
> > > > > > Plot[Evaluate[sol[c]], {t, -3, 3}, PlotStyle -> {Red, Th=
ick},
> > > > > > AspectRatio -> Automatic,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
> > > > > > Manipulate[
> > > > > > Plot[Evaluate[sol[c][[1]]], {t, -3, 3}, PlotStyle -> {Re=
d, Thick},
> > > > > > AspectRatio -> Automatic,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
> > > > > > " 2 parameter Dynamic manipulation not OK"
> > > > > > Manipulate[
> > > > > > Plot[{Evaluate[sol[c][[1]]], Evaluate[sol[c][[1]]]}, {t, -3=
, 3}
> > ,
> > > > > > PlotStyle -> {Green, Thick}, AspectRatio -> Automa=
ti=
> c,
> > > > > > PlotRange -> {{-3, 3}, {-10, 10}}], {c, -0.5, 2, 0.2}=
]
>
> > > > > --
> > > > > Murray Eisenberg murrayei=
se=
> nb=
> > ..=
> > > .@=
> > > > gmail.com
> > > > > 80 Fearing Street phone 41=
3 =
> 54=
> > 9-=
> > > 10=
> > > > 20 (H)
> > > > > Amherst, MA 01002-1912
>
> > > With some conviction I make the following suggestion.
>
> > > { a Cos[t], a Sin[t] } with perturbation of a gives an annular ring.
> > > Boyles Law P*V = const for given const temp T becomes generalised t=
o
> > > gas law P V / T = const. when T is varied. The general form is m=
or=
> e
> > > value in scientific work.
>
> > > The same case illustrates my point.
>
> > > c=1 ;
> > > CL1=Manipulate[ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,
> > > 0,Pi},PlotStyle->{Red,Thick},PlotRange->{{-1.5,1.5},{0,2},{0,1.5}}],{=
c,
> > > 1,1.5,.1}]
> > > CL2=ParametricPlot3D[{c Cos[t],0.6 t,c Sin[t]},{t,0,Pi},{c,1,1.5},M=
es=
> h-=
> > >{15,4}]
>
> > > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z=
'[=
> t]=
> > =
> > > ==2 c x[ t]-
> > > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
>
> > > DIFF1=
> > > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic=
,P=
> lo=
>
> > tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5=
},=
>
> {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
> > > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
>
> > > (* the [% ] above would certainly produce error diagnostics as of
> > > now!! *)
>
> > > Is it possible to push up or upgrade a constant (along with a c=
ho=
> se=
> > n
> > > domain) into a variable, from state X1 ( with one independent variabl=
e
> > > t ) to CL2 ( with two independent variables t and c) thereby
> > > spreading/dragging/extruding a line into a surface?
>
> > > It is possible to generalize both in closed form (analytically
> > > definable functions )and in differential form (for smooth continuo=
us
> > > manifolds ) with automatically generated boundary conditions added ,
> > > from surfaces to solids/volumes and further on to 4D objects .. by
> > > proper assembly or stacking into 3- space objects.
>
> > > It is possible to implement a form in CL2 for every form CL1 to
> > > accommodate c seeding among determining differential equations as wel=
l
> > > as in Boundary Conditions as an add-on/ generalization function by
> > > variation of parameter c, sharing same boundary conditions between
> > > them.
>
> > > The manner of range specification in code available to the user is=
t=
> o
> > > put c and t ranges simply together inside square bracket rather than
> > > on either side of the closing square bracket.
>
> > > So I tend to suggest/ request for making a provision, incorporating
> > > whatever it takes to realize it, to enable plot of DIFF2 without
> > > error diagnostics and output the same DIFF1 as DIFF2 but now as a
> > > surface .
>
> > > The logic is the same, to me at least, in such a result depiction. Th=
e
> > > DIFF2 should show _a surface_ just as CL2 does.
>
> > > This may seem too long drawn out, A request for its acceptance or
> > > implementation in further Mathematica development may look a tall
> > > order, I took liberty to make the comment. Please comment about your
> > > view and problems involved in what looks as a crass generalization. O=
r
> > > a simple code to make it routinely available be please indicated.
>
> > > Regards
> > > Narasimham
>
> > > sol[c_]:={x[t],y[t],z[t]}/.First[NDSolve[{y''[t]+Sin[y[t]/
> > > c]==0,y'[0]==0,y[0]==1/(1+c),x'[t]==t,x[0]==c^2,z=
'[=
> t]=
> > =
> > > ==2 c x[ t]-
> > > y[t],z[0]==2},{x,y,z},{t,-3,3}]];
> > > DIFF1=
> > > Manipulate[ ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] ,
> > > sol[c][[3]] }],{t,-2,2},PlotStyle->{Red,Thick},AspectRatio->Automatic=
,P=
> lo=
>
> > tRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5=
},=
>
> {-2.5,2.5}},PlotLabel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
>
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.=
5}=
> , {-2.5,2.5}}]
>
> > > (* the % would certainly produce error diagnostics!! *)tRange->{{0,5}=
,{=
> -2=
>
> > .5,2.5}, {-2.5,2.5}},PlotRange-> >{{0,5},{-2.5,2.5}, {-2.5,2.5}},Plo=
tL=
>
> abel->Style[Framed[ "c PARAMETRIC
>
> > > LINES EXIST BUT INVISIBLE"] ]],{c,-0.5,2,0.2}]
> > > DIFF2=
> > > ParametricPlot3D[Evaluate[{sol[c][[1]] ,sol[c][[2]] , sol[c][[3]] =
}]=
> ,
> > > {t,-2,2},{c,-0.5,2,0.2}, PlotStyle->{Red,Thick},AspectRatio->Automati=
c,=
> Pl=
>
> > =
>
> > otRange->{{0,5},{-2.5,2.5}, {-2.5,2.5}},PlotRange-
>
> > > >{{0,5},{-2.5,2.5}, {-2.5,2.5}}]
> > > (* the % would certainly produce error diagnostics!! *)
>
> > If DIFF2 cannot work without error diagnostics (regarding pushing
> > domain of c inclusively into square brackets together with domain of
> > t), please indicate a dynamic adapter code module lines that may be
> > appended so that one need not write own code lines with Tooltip or
> > whatever it takes to compute/display the generalized function [t,c].
>
> > Took liberty to suggest this as the prospect of computing and
> > viewing generalized functions (numerically at least to begin with)
> > whereby multiple constants can get embedded into 3-space and
> > even into a muti-dimensional spaces by the power of functional
> > definition flexibility and graphical depiction in Mathematica, is
> > is indeed exciting.
>
> > Regards
> > Narasimham
>
> The suggestion actually is for solid modeling,could not express it
> earlier.
>
> To appreciate the invariantly fixing up any one among three variables
> and making the
> three component surfaces which can be morphed/ Manipulated/ clubbed
> back/integrated
> in 3D solid modelling,I have written this code ( fwiw, instructional)
> in mathematical solid
> parametric 3D modeling thus:
>
> c = 1.2; " 3 PARAM DECOMPN THICK CYL Solid modelling "
> " Take two out of 3 parameters {a,t,v } at a time for surface \
> generation and
> one out three parameters at a time for single generating parameter =
\
> line. "
> Clear[a, t, v] ;
> " vary v & t. It makes a cylinder surface, Dilatation of each cyl \
> surface at a =1 generates a solid. "
> a = 1.;
> aa = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
> 2 Pi}, { v, 0, 2 Pi}, Mesh -> {18, 4}] ;
> at = ParametricPlot3D[ {a Cos[t + 2.5], c t , a Sin[t + 2.5] }, {t,
> 0, 2 Pi}, PlotStyle -> {Orange, Thick}] ;
> Clear[a, t, v] ;
> " vary a & t. It makes a helical fin surface, entire fin rigid body
> \
> Rotation at v = Pi /2 generates a solid. "
> v = Pi/2. ;
> vv = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, {t, 0,
> 2 Pi}, { a, 1, 1.6}, Mesh -> {18, 4}] ;
> va = ParametricPlot3D[ {a Cos[4 + v], c 4. , a Sin[4 + v] }, {=
a,
> 1, 1.6}, PlotStyle -> {Orange, Thick}] ;
> Clear[a, t, v] ;
> " vary v & a. It makes an annulus surface , entire annulus \
> Translation at t = Pi generates a solid. "
> t = Pi ;
> tt = ParametricPlot3D[ {a Cos[t + v], c t , a Sin[t + v] }, { v, 0,
> 2 Pi}, {a, 1, 1.6}, Mesh -> {18, 4}] ;
> tv = ParametricPlot3D[ {1.25 Cos[t + v], c t ,
> 1.25 Sin[t + v] }, { v, 0, 2 Pi}, PlotStyle -> {Orange, Thick}=
] ;
> Surfs = Show[{aa, vv, tt}, PlotRange -> All, Axes -> None,
> Boxed -> False]
> Lines = Show[{at, va, tv}, PlotRange -> All, Axes -> None,
> Boxed -> False]
> Show[Surfs, Lines]
>
> I hope the need for development of general command in solid
> modeling is clearer from above closed parametric form example.
>
> Regards
> Narasimham
For Manipulate queries in solid modeling I would post a fresh topic.
Narasimham
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web