Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #9752 > unrolled thread
| Started by | Alexei Boulbitch <Alexei.Boulbitch@iee.lu> |
|---|---|
| First post | 2012-04-23 09:45 +0000 |
| Last post | 2012-04-26 09:26 +0000 |
| Articles | 2 — 2 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
Re: Controlling scale of Graphics on paper Alexei Boulbitch <Alexei.Boulbitch@iee.lu> - 2012-04-23 09:45 +0000
Re: Controlling scale of Graphics on paper Joseph Gwinn <joegwinn@comcast.net> - 2012-04-26 09:26 +0000
| From | Alexei Boulbitch <Alexei.Boulbitch@iee.lu> |
|---|---|
| Date | 2012-04-23 09:45 +0000 |
| Subject | Re: Controlling scale of Graphics on paper |
| Message-ID | <jn38bm$g8l$1@smc.vnet.net> |
I would like to use Mathematica to make printed templates of various
kinds.
In one use, a complicated shape is generated mathematically and
displayed using Graphics or Show, the plot is printed on paper, the
paper is glued to a piece of wood, which is cut and drilled to the lines
and center-points. This requires the ability to control the on-paper
scale factor, so that a length of 1.0 in a line ends up being one inch
(or one centimeter) on paper.
I assume that this is possible, but have not found anything relevant in
the online documentation. What I have done is used Mathematica to make
dolls of machine parts; in this case it was sufficient that all be in
the same scale, which was achieved using ImageSize->72*6 directives, but
ImageSize doesn't speak directly to the issue of scale on paper.
It may be that ImageSize->{w,h} can be used, but there is some math
required.
So, my question is how best to achieve a specified scale on paper.
TIA,
Joe Gwinn
Dear Joe,
There had been once a discussion on this subject here, though I have no reference to it. The outcome consists in the relation:
1 cm = 35.7744 pts. Then if you need to specify the size of your graphics say, 10 cm x 15 cm, you could do the following:
Plot[Sin[x],{x,-π,π},ImageSize→35.7744*{10,15},AspectRatio→1]
Have fun, Alexei
Alexei BOULBITCH, Dr., habil.
IEE S.A.
ZAE Weiergewan,
11, rue Edmond Reuter,
L-5326 Contern, LUXEMBOURG
Office phone : +352-2454-2566
Office fax: +352-2454-3566
mobile phone: +49 151 52 40 66 44
e-mail: alexei.boulbitch@iee.lu
[toc] | [next] | [standalone]
| From | Joseph Gwinn <joegwinn@comcast.net> |
|---|---|
| Date | 2012-04-26 09:26 +0000 |
| Message-ID | <jnb4ci$5cn$1@smc.vnet.net> |
| In reply to | #9752 |
In article <jn38bm$g8l$1@smc.vnet.net>,
Alexei Boulbitch <Alexei.Boulbitch@iee.lu> wrote:
> I would like to use Mathematica to make printed templates of various
>
> kinds.
>
[snip]
>
> So, my question is how best to achieve a specified scale on paper.
>
>
>
> TIA,
>
>
>
> Joe Gwinn
>
>
>
> Dear Joe,
>
>
>
> There had been once a discussion on this subject here, though I have no
> reference to it. The outcome consists in the relation:
>
> 1 cm = 35.7744 pts. Then if you need to specify the size of your graphics
> say, 10 cm x 15 cm, you could do the following:
>
>
>
> Plot[Sin[x],{x,-π,π},ImageSize→35.7744*{10,15},AspectRatio→1]
Thanks. By the way, the above renders correctly only if interpreted as
UTF-8.
I tried:
Plot[Sin[x], {x,-Pi,+Pi}, ImageSize->35.7744*{10,15}, AspectRatio->1]",
and the X and Y axes have different scale factors. Nor do I get a delta
of 1 on either axis being one centimeter on paper (8.5" by 11"), or one
inch if ImageSize->72*6 (for one dimension being 6"). I'm wondering if
AspectRatio->Automating will cause X and Y scale factors to be equal.
Yves Klett suggests use of PlotRange as well. These will be tried.
I'm guessing that three different things will all have to be set
correctly and self-consistently to achieve a fixed and uniform scale on
paper.
Joe Gwinn
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web