Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #8019 > unrolled thread
| Started by | Murray Eisenberg <murray@math.umass.edu> |
|---|---|
| First post | 2012-01-20 06:49 +0000 |
| Last post | 2012-01-21 10:24 +0000 |
| Articles | 2 — 2 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: Slow plotting of reflected parametric "butterflies" Murray Eisenberg <murray@math.umass.edu> - 2012-01-20 06:49 +0000
Re: Slow plotting of reflected parametric "butterflies" Chris Young <cy56@comcast.net> - 2012-01-21 10:24 +0000
| From | Murray Eisenberg <murray@math.umass.edu> |
|---|---|
| Date | 2012-01-20 06:49 +0000 |
| Subject | Re: Slow plotting of reflected parametric "butterflies" |
| Message-ID | <jfb2qn$hl4$1@smc.vnet.net> |
I don't have any suggestions, at least yet, on speeding up your code.
However, you should avoid naming things "C" and "D", since those names
stand for objects already built into Mathematica. In fact, didn't you
notice that running your code gives Shadowing warning messages?
On 1/19/12 5:13 AM, Chris Young wrote:
> I'm wondering if there's anyway I can speed this up. It's basically
> just some sections of a parabolic hyperboloid, with the outer edges
> curves. I'm porting it from another program, where it ran much faster.
> I had to chop it up into parts for that program, but maybe this isn't
> the best way to do it in Mathematica.
>
> http://home.comcast.net/~cy56/Mma/ReflectedButterflies.nb
> http://home.comcast.net/~cy56/Mma/ReflectedButterfliesPic.png
>
> Chris Young
> cy56@comcast.net
>
>
> \[HorizontalLine]CurvedButterfly[A_, B_, C_, D_, u_,
> v_, \[ScriptC]_] :=
>
> Table[
> (A + B + C + D)/4 +
> j Sqrt[1 - \[ScriptC] v] u/2 ((A + C)/2 - (B + D)/2) +
> k u/2 v (((C + D)/2 + j u (C - D)/2) - ((A + B)/2 +
> j u (A - B)/2)),
> {j, {-1, 1}}, {k, {-1, 1}}
> ] // FullSimplify // Flatten[#, 1]&
> Putting Butterfly into a Manipulate module:
> Manipulate[
> With[
> {
> A = {Ax, Ay, Az},
> B = {Bx, By, Bz},
> C = {Cx, Cy, Cz},
> D = {Dx, Dy, Dz}
> },
> Show[
> ParametricPlot3D[
> Table[
> ( {
> {\[ScriptI], 0, 0},
> {0, \[ScriptJ], 0},
> {0, 0, \[ScriptK]}
> } ). #& /@ \[HorizontalLine]CurvedButterfly[A, B, C, D, u,
> v, wingCurve],
> {\[ScriptI], {-1, 1}}, {\[ScriptJ], {-1, 1}}, {\[ScriptK], {-1,
> 1}}],
> {u, 0, 1}, {v, 0, 1},
>
> PlotRange -> 2.5,
> Lighting -> "Neutral",
> ColorFunctionScaling -> False,
> ColorFunction -> ({x, y, z, u, v} \[Function]
> Hue[\[LeftFloor]5 v\[RightFloor]/10]),
> Mesh -> None,
> PlotPoints -> plotPts,
> AxesLabel -> {"x", "y", "z"}
> ],
> Graphics3D[
> {
> With[{pts = {A, B, C, D}},
> Table[{Hue[(k - 1)/4], Sphere[pts[[k]], ptRad]}, {k, 1, 4}]
> ]
> }
> ]
> ]
> ],
> {{Ax, 1.25}, -2.5, 2.5, 0.03125},
> {{Ay, 2}, -2.5, 2.5, 0.03125},
> {{Az, 0.75}, -2.5, 2.5, 0.03125},
>
> {{Bx, 1.75}, -2.5, 2.5, 0.03125},
> {{By, 0.5}, -2.5, 2.5, 0.03125},
> {{Bz, 0.125}, -2.5, 2.5, 0.03125},
>
> {{Cx, 0.5}, -2.5, 2.5, 0.03125},
> {{Cy, 0.375}, -2.5, 2.5, 0.03125},
> {{Cz, 0.25}, -2.5, 2.5, 0.03125},
>
> {{Dx, 0.375}, -2.5, 2.5, 0.03125},
> {{Dy, 0.125}, -2.5, 2.5, 0.03125},
> {{Dz, 1.25}, -2.5, 2.5, 0.03125},
>
> {{plotPts, 4}, 2, 30, 1},
> {{ptRad, 0.1}, 0, 0.3},
> {{wingCurve, 0}, 0, 1}
> ]
>
>
--
Murray Eisenberg murray@math.umass.edu
Mathematics & Statistics Dept.
Lederle Graduate Research Tower phone 413 549-1020 (H)
University of Massachusetts 413 545-2859 (W)
710 North Pleasant Street fax 413 545-1801
Amherst, MA 01003-9305
[toc] | [next] | [standalone]
| From | Chris Young <cy56@comcast.net> |
|---|---|
| Date | 2012-01-21 10:24 +0000 |
| Message-ID | <jfe3ov$a24$1@smc.vnet.net> |
| In reply to | #8019 |
By rewriting the function more simply, taking out the "C" and "D", and
reducing PlotPoints and MaxRecursion, I've got a decent response from
the butterfly plot. I'm also using Set instead of SetDelayed in the
defition for MSeg2.
I'm wondering if doing the reflections via the matrix multiplication is
slowing things down a lot. I want to have the reflections, but I'm
wondering if there's a faster way of doing them in this case, such as
by taking parts of the 3D vector and just multiplying each part by -1
or 1 and forming a table that way.
http://home.comcast.net/~cy56/Mma/ReflectedButterflies2.nb
http://home.comcast.net/~cy56/Mma/ReflectedButterfliesPic1.png
http://home.comcast.net/~cy56/Mma/ReflectedButterfliesPic2.png
Chris Young
cy56@comcast.net
In[64]:= \[HorizontalLine]MSeg2[\[ScriptCapitalA]_, \
\[ScriptCapitalB]_, k_, t_] = (\[ScriptCapitalA] + \[ScriptCapitalB])/
2 + k (t - 1/2) (\[ScriptCapitalB] - \[ScriptCapitalA]);
In[88]:= Manipulate[
Module[
{
\[ScriptCapitalA] = {Ax, Ay, Az}, \[ScriptCapitalB] = {Bx, By,
Bz}, \[ScriptCapitalC] = {Cx, Cy, Cz}, \[ScriptCapitalD] = {Dx,
Dy, Dz},
\[ScriptCapitalP], \[ScriptCapitalQ]
},
(* points riding along the "rails" \[ScriptCapitalA]\
\[ScriptCapitalC] and \[ScriptCapitalB]\[ScriptCapitalD]: *)
\
\[ScriptCapitalP][n_] = (1 - n) \[ScriptCapitalA] +
n \[ScriptCapitalC];
\[ScriptCapitalQ][n_] = (1 - n) \[ScriptCapitalB] +
n \[ScriptCapitalD];
(* reflections of the "butterfly" across all the coordinate planes *)
Show[
ParametricPlot3D[
Table[
( {
{\[ScriptI], 0, 0},
{0, \[ScriptJ], 0},
{0, 0, \[ScriptK]}
} ). \[HorizontalLine]MSeg2[\[ScriptCapitalP][
u], \[ScriptCapitalQ][u], 2 u - 1, v],
{\[ScriptI], {-1, 1}}, {\[ScriptJ], {-1, 1}}, {\[ScriptK], {-1,
1}}
],
{u, 0, 1}, {v, 0, 1},
PlotPoints -> plotPts,
Mesh -> mesh,
MeshStyle -> Tube[tubeR],
MeshFunctions -> {{x, y, z, u, v} \[Function] v},
MeshShading -> {Lighter[Blue, .5], Yellow, Orange, Yellow,
Lighter[Blue, .5]},
MaxRecursion -> maxRecurs
],
(* the corners of the twisted sheet *)
With[{pts = {\[ScriptCapitalA], \[ScriptCapitalB], \
\[ScriptCapitalC], \[ScriptCapitalD]}},
Graphics3D[
{Table[{Hue[(k - 1)/4], Sphere[pts[[k]], ptRad]}, {k, 1, 4}],
Gray, Sphere[Plus @@ pts/4, ptRad]}]
],
Lighting -> "Neutral",
PlotRange -> 4,
Axes -> True,
AxesLabel -> {"x", "y", "z"}
]
],
{{Ax, -4}, -4, 4, .125},
{{Ay, -4}, -4, 4, .125},
{{Az, -4}, -4, 4, .125},
{{Bx, -4}, -4, 4, .125},
{{By, 0}, -4, 4, .125},
{{Bz, -4}, -4, 4, .125},
{{Cx, 0}, -4, 4, .125},
{{Cy, 0}, -4, 4, .125},
{{Cz, -2}, -4, 4, .125},
{{Dx, -4}, -4, 4, .125},
{{Dy, -2}, -4, 4, .125},
{{Dz, 0}, -4, 4, .125},
{{mesh, 4}, 0, 9},
{{tubeR, 0.01}, 0, 0.1, 0.01},
{{plotPts, 6}, 2, 30, 1},
{{maxRecurs, 1}, 0, 4, 1},
{{ptRad, .1}, 0, 0.5, 0.01},
{{tubeR, .03}, 0, 0.5, 0.01}
]
Out[88]= Manipulate[Module[{\[ScriptCapitalA]$ = {Ax, Ay, Az}, \
\[ScriptCapitalB]$ = {Bx, By, Bz},
\[ScriptCapitalC]$ = {Cx, Cy, Cz}, \[ScriptCapitalD]$ = {Dx, Dy, =
\
Dz}, \[ScriptCapitalP]$, \[ScriptCapitalQ]$},
\[ScriptCapitalP]$[n$_] = (1 - n$)*\[ScriptCapitalA]$ + n$*\
\[ScriptCapitalC]$;
\[ScriptCapitalQ]$[n$_] = (1 - n$)*\[ScriptCapitalB]$ + n$*\
\[ScriptCapitalD]$;
Show[ParametricPlot3D[Table[{{\[ScriptI], 0, 0}, {0, \[ScriptJ], \
0},
{0, 0, \[ScriptK]}} . \[HorizontalLine]MSeg2[\
\[ScriptCapitalP]$[u], \[ScriptCapitalQ]$[u], 2*u - 1, v],
{\[ScriptI], {-1, 1}}, {\[ScriptJ], {-1, 1}}, {\[ScriptK], \
{-1, 1}}],
{u, 0, 1}, {v, 0, 1}, PlotPoints -> plotPts, Mesh -> mesh,
MeshStyle -> Tube[tubeR], MeshFunctions ->
{Function[{x, y, z, u, v}, v]}, MeshShading ->
{Lighter[Blue, 0.5], Yellow, Orange, Yellow,
Lighter[Blue, 0.5]}, MaxRecursion -> maxRecurs],
With[{pts$ = {\[ScriptCapitalA]$, \[ScriptCapitalB]$, \
\[ScriptCapitalC]$, \[ScriptCapitalD]$}},
Graphics3D[{Table[{Hue[(k - 1)/4], Sphere[pts$[[k]],
ptRad]}, {k, 1, 4}], Gray, Sphere[Plus @@ pts$/4,
ptRad]}]], Lighting -> "Neutral", PlotRange -> 4,
Axes -> True, AxesLabel -> {"x", "y", "z"}]],
{{Ax, -4}, -4, 4, 0.125}, {{Ay, -4}, -4, 4, 0.125},
{{Az, -4}, -4, 4, 0.125}, {{Bx, -4}, -4, 4, 0.125},
{{By, 0}, -4, 4, 0.125}, {{Bz, -4}, -4, 4, 0.125},
{{Cx, 0}, -4, 4, 0.125}, {{Cy, 0}, -4, 4, 0.125},
{{Cz, -2}, -4, 4, 0.125}, {{Dx, -4}, -4, 4, 0.125},
{{Dy, -2}, -4, 4, 0.125}, {{Dz, 0}, -4, 4, 0.125},
{{mesh, 4}, 0, 9}, {{tubeR, 0.01}, 0, 0.1, 0.01},
{{plotPts, 6}, 2, 30, 1}, {{maxRecurs, 1}, 0, 4, 1},
{{ptRad, 0.1}, 0, 0.5, 0.01}, {{tubeR, 0.01}, 0, 0.5, 0.01}]
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web