Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #7627 > unrolled thread

ParametricPlot3D vs Reduce

Started byAndrzej Kozlowski <akozlowski@gmail.com>
First post2012-01-07 10:22 +0000
Last post2012-01-08 09:33 +0000
Articles 3 — 3 participants

Back to article view | Back to comp.soft-sys.math.mathematica


Contents

  ParametricPlot3D vs Reduce Andrzej Kozlowski <akozlowski@gmail.com> - 2012-01-07 10:22 +0000
    Re: ParametricPlot3D vs Reduce Szabolcs Horvát <szhorvat@gmail.com> - 2012-01-08 09:33 +0000
    Re: ParametricPlot3D vs Reduce Andrzej Kozlowski <akoz@mimuw.edu.pl> - 2012-01-08 09:33 +0000

#7627 — ParametricPlot3D vs Reduce

FromAndrzej Kozlowski <akozlowski@gmail.com>
Date2012-01-07 10:22 +0000
SubjectParametricPlot3D vs Reduce
Message-ID<je96dj$j22$1@smc.vnet.net>
I just came across something somewhat baffling, though it could be the 
result of an imperfect understanding of how 3D graphic functions work. 
Consider the following three rational functions of two variables, which 
we will think of as parameters of a point on a surface in 3D.

rats = {(-b - 2*d - b^3*d^2)/(b*d), (2*b + d + b^4*d +
      2*b^3*d^2)/(b^2*d), (-1 - 2*b^3*d - b^2*d^2)/(b^2*d)};

Now, note that:

Reduce[Thread[-1 <= rats <= 1], {b, d}]

False

in other words, there are no values of the parameters b and d for which 
the point lies in the unit cube. However:

ParametricPlot3D[rats, {b, -10, 10}, {d, -10, 10},
 PlotRange -> {{-1, 1}, {-1, 1}, {-1, 1}},
 AxesLabel -> {"a", "b", "c"}]

There appear to be several polygons inside the unit cube that should not 
be there?

Andrzej Kozlowski


[toc] | [next] | [standalone]


#7669

FromSzabolcs Horvát <szhorvat@gmail.com>
Date2012-01-08 09:33 +0000
Message-ID<jebnsd$1ie$1@smc.vnet.net>
In reply to#7627
On 2012.01.07. 11:22, Andrzej Kozlowski wrote:
> I just came across something somewhat baffling, though it could be the
> result of an imperfect understanding of how 3D graphic functions work.
> Consider the following three rational functions of two variables, which
> we will think of as parameters of a point on a surface in 3D.
>
> rats = {(-b - 2*d - b^3*d^2)/(b*d), (2*b + d + b^4*d +
>        2*b^3*d^2)/(b^2*d), (-1 - 2*b^3*d - b^2*d^2)/(b^2*d)};
>
> Now, note that:
>
> Reduce[Thread[-1<= rats<= 1], {b, d}]
>
> False
>
> in other words, there are no values of the parameters b and d for which
> the point lies in the unit cube. However:
>
> ParametricPlot3D[rats, {b, -10, 10}, {d, -10, 10},
>   PlotRange ->  {{-1, 1}, {-1, 1}, {-1, 1}},
>   AxesLabel ->  {"a", "b", "c"}]
>
> There appear to be several polygons inside the unit cube that should not
> be there?
>

Dear Andrzej,

It appears that rats is discontinuous around 0:

Plot[rats /. b -> 1.2 // Evaluate, {d, -1, 1},
  PlotStyle -> {{Red}, {Blue}, {Green}}, Axes -> False, Frame -> True]

It seems that both Plot and ParametricPlot3D are not able to detect this 
discontinuity.  What you see in the unit box is the same thing as the 
vertical line at 0 in my Plot example above.

We can fix this by specifying the Exclusions option manually:

Plot[rats /. b -> 1.2 // Evaluate, {d, -1, 1},
  PlotStyle -> {{Red}, {Blue}, {Green}}, Axes -> False, Frame -> True,
  Exclusions -> {0}]

For ParemetricPlot3D, this is done as follows:

unitBox = {{-1, 1}, {-1, 1}, {-1, 1}}; (* avoid typing *)

ParametricPlot3D[rats, {b, -1, 1}, {d, -1, 1},
  PlotRange -> 10 unitBox, MaxRecursion -> 2, PlotPoints -> 40,
  Exclusions -> {b == 0, d == 0}]

If you change the plot range to 1 unitBox (instead of 10), you get an 
empty plot.

Note that I needed to limit MaxRecursion and PlotPoints manually, 
otherwise my machine would run out of memory and freeze due to disk 
swapping...

Alternatively we can chop up the parameter range into four pieces by 
hand, like this:

With[{pr = 10 unitBox},
  Show[
   ParametricPlot3D[rats, {b, 0, 1}, {d, 0, 1}, PlotRange -> pr],
   ParametricPlot3D[rats, {b, -1, 0}, {d, 0, 1}, PlotRange -> pr],
   ParametricPlot3D[rats, {b, 0, 1}, {d, -1, 0}, PlotRange -> pr],
   ParametricPlot3D[rats, {b, -1, 0}, {d, -1, 0}, PlotRange -> pr]
   ]
  ]

-- 
Szabolcs Horvát
Mma QA site proposal: http://area51.stackexchange.com/proposals/37304

[toc] | [prev] | [next] | [standalone]


#7670

FromAndrzej Kozlowski <akoz@mimuw.edu.pl>
Date2012-01-08 09:33 +0000
Message-ID<jebntc$1il$1@smc.vnet.net>
In reply to#7627
Thanks a lot. As I mentioned in my second post on this subject, using RegionFunction also seems to deal with this problem:

ParametricPlot3D[rats, {b, -10, 10}, {d, -10, 10},
RegionFunction ->
 Function[{x, y, z, u,
   v}, -1 <= x <= 1 && -1 <= y <= 1 && -1 <= z <= 1],
AxesLabel -> {"a", "b", "c"}]

Andrzej


On 7 Jan 2012, at 14:05, Szabolcs Horv=E1t wrote:

> On 2012.01.07. 11:22, Andrzej Kozlowski wrote:
>> I just came across something somewhat baffling, though it could be the
>> result of an imperfect understanding of how 3D graphic functions work.
>> Consider the following three rational functions of two variables, which
>> we will think of as parameters of a point on a surface in 3D.
>>
>> rats = {(-b - 2*d - b^3*d^2)/(b*d), (2*b + d + b^4*d +
>>       2*b^3*d^2)/(b^2*d), (-1 - 2*b^3*d - b^2*d^2)/(b^2*d)};
>>
>> Now, note that:
>>
>> Reduce[Thread[-1<= rats<= 1], {b, d}]
>>
>> False
>>
>> in other words, there are no values of the parameters b and d for which
>> the point lies in the unit cube. However:
>>
>> ParametricPlot3D[rats, {b, -10, 10}, {d, -10, 10},
>>  PlotRange ->  {{-1, 1}, {-1, 1}, {-1, 1}},
>>  AxesLabel ->  {"a", "b", "c"}]
>>
>> There appear to be several polygons inside the unit cube that should not
>> be there?
>>
>
> Dear Andrzej,
>
> It appears that rats is discontinuous around 0:
>
> Plot[rats /. b -> 1.2 // Evaluate, {d, -1, 1},
> PlotStyle -> {{Red}, {Blue}, {Green}}, Axes -> False, Frame -> True]
>
> It seems that both Plot and ParametricPlot3D are not able to detect this discontinuity.  What you see in the unit box is the same thing as the vertical line at 0 in my Plot example above.
>
> We can fix this by specifying the Exclusions option manually:
>
> Plot[rats /. b -> 1.2 // Evaluate, {d, -1, 1},
> PlotStyle -> {{Red}, {Blue}, {Green}}, Axes -> False, Frame -> True,
> Exclusions -> {0}]
>
> For ParemetricPlot3D, this is done as follows:
>
> unitBox = {{-1, 1}, {-1, 1}, {-1, 1}}; (* avoid typing *)
>
> ParametricPlot3D[rats, {b, -1, 1}, {d, -1, 1},
> PlotRange -> 10 unitBox, MaxRecursion -> 2, PlotPoints -> 40,
> Exclusions -> {b == 0, d == 0}]
>
> If you change the plot range to 1 unitBox (instead of 10), you get an empty plot.
>
> Note that I needed to limit MaxRecursion and PlotPoints manually, otherwise my machine would run out of memory and freeze due to disk swapping...
>
> Alternatively we can chop up the parameter range into four pieces by hand, like this:
>
> With[{pr = 10 unitBox},
> Show[
>  ParametricPlot3D[rats, {b, 0, 1}, {d, 0, 1}, PlotRange -> pr],
>  ParametricPlot3D[rats, {b, -1, 0}, {d, 0, 1}, PlotRange -> pr],
>  ParametricPlot3D[rats, {b, 0, 1}, {d, -1, 0}, PlotRange -> pr],
>  ParametricPlot3D[rats, {b, -1, 0}, {d, -1, 0}, PlotRange -> pr]
>  ]
> ]
>
> --
> Szabolcs Horv=E1t
> Mma QA site proposal: http://area51.stackexchange.com/proposals/37304

[toc] | [prev] | [standalone]


Back to top | Article view | comp.soft-sys.math.mathematica


csiph-web