Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #6810 > unrolled thread

Re: Ragged region boundary

Started byPatrick Scheibe <pscheibe@trm.uni-leipzig.de>
First post2011-11-29 12:10 +0000
Last post2011-11-30 08:31 +0000
Articles 3 — 2 participants

Back to article view | Back to comp.soft-sys.math.mathematica


Contents

  Re: Ragged region boundary Patrick Scheibe <pscheibe@trm.uni-leipzig.de> - 2011-11-29 12:10 +0000
    Re: Ragged region boundary Chris Young <cy56@comcast.net> - 2011-11-29 13:06 +0000
    Re: Ragged region boundary Patrick Scheibe <pscheibe@trm.uni-leipzig.de> - 2011-11-30 08:31 +0000

#6810 — Re: Ragged region boundary

FromPatrick Scheibe <pscheibe@trm.uni-leipzig.de>
Date2011-11-29 12:10 +0000
SubjectRe: Ragged region boundary
Message-ID<jb2i3g$5hk$1@smc.vnet.net>
Hi,

first you could compile your torus-function and compare the runtimes

torus[c_, a_, u_, v_] := {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u],
a Sin[v]};
torusCompiled = 
 Compile[{{c, _Real}, {a, _Real}, {u, _Real}, {v, _Real}},
  {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u], a Sin[v]}, 
  CompilationTarget -> "C"];

In[38]:= First[
   AbsoluteTiming[Do[#[1.3, 0.3, 2.3, 4.5], {1000000}]]] & /@ {torus, 
  torusCompiled}

Out[38]= {5.190318, 0.863473}

and then you could set MaxRecursion to a higher value. Since then the
runtime drops further, you could use ControlActive to use a very fast
version, when you use the sliders. See the code at the end.

Your "equator" is not the only unwanted boundary, but you don't see the
other one. These are the lines where your PlotRange ends. The doc to
BoundaryStyle says

"For 3D graphics, it is also used at the boundary of regions defined by
PlotRange."

So these lines are at 0 and 2Pi for both of your variables. I have no
idea how to turn them off.

Cheers
Patrick

Manipulate[
 ParametricPlot3D[
  torusCompiled[c, a, u, v], {u, 0, 2 \[Pi]}, {v, 0, 2 \[Pi]},
  MeshFunctions -> {{x, y, z, \[Theta], \[Phi]} \[Function] 
     z + Tan[tilt] x},
  RegionFunction -> ({x, y, z, \[Theta], \[Phi]} \[Function] 
     z <= -Tan[tilt] x),
  Mesh -> mesh,
  MaxRecursion -> ControlActive[0, 5],
  MeshStyle -> {Lighter[Yellow], Tube[tubeR]},
  BoundaryStyle -> {Lighter[Red], Tube[tubeR]},
  PlotStyle -> {Orange, Opacity[opac]},
  PlotPoints -> ControlActive[10, plotPts],
  Axes -> True,
  AxesLabel -> {"x", "y", "z"},
  PlotRange -> {{-4, 4}, {-4, 4}, {-3, 3}},
  BoxRatios -> {8, 8, 6},
  ViewPoint ->
   {
    viewR Cos[view\[Theta]] Sin[view\[Phi]],
    viewR Sin[view\[Theta]] Sin[view\[Phi]],
    viewR Cos[view\[Phi]]
    },
  PerformanceGoal -> "Quality"
  ],
 
 {{c, 3}, 0, 4},
 {{a, 1}, 0, 3},
 {{sphereR, 0.1}, 0, 0.5},
 {{tubeR, 0.05}, 0, 0.5},
 {{opac, 0.5}, 0, 1},
 {{mesh, 0}, 0, 16, 1},
 {{tilt, N[ArcSin[a/c]]}, 0, \[Pi]/2, \[Pi]/36},
 {{plotPts, 50}, 0, 200, 5},
 {{viewR, 100}, 0, 100, 5},
 {{view\[Theta], \[Pi]/2}, 0, 2 \[Pi], \[Pi]/36},
 {{view\[Phi], \[Pi]/2}, 0, \[Pi], \[Pi]/36}
 ] 

On Mon, 2011-11-28 at 05:54 -0500, Chris Young wrote:
> Would anyone have any tips on how to get a better region boundary here?
> Maybe via CountourPlot3D?
> 
> Actually, if I use PlotPoints -> 200, it's OK, but it's extremely slow
> to plot then, of course.
> 
> Also, I don't want the horizontal "boundary" line at the equator. Can't
> see why this is considered a boundary line anyway.
> 
> http://home.comcast.net/~cy56/RegionBoundary.nb
> 
> http://home.comcast.net/~cy56/RegionBoundary.png
> 
> 
> Manipulate[
>  ParametricPlot3D[
>   torus[c, a, u, v], {u, 0, 2 \[Pi]}, {v, 0, 2 \[Pi]},
>   MeshFunctions -> {{x, y, z, \[Theta], \[Phi]} \[Function]
>      z + Tan[tilt] x},
>   RegionFunction -> ({x, y, z, \[Theta], \[Phi]} \[Function]
>      z <= -Tan[tilt] x),
>   Mesh -> mesh,
>   MeshStyle -> {Lighter[Yellow], Tube[tubeR]},
>   BoundaryStyle -> {Lighter[Red], Tube[tubeR]},
>   PlotStyle -> {Orange, Opacity[opac]},
>   PlotPoints -> plotPts,
>   Axes -> True,
>   AxesLabel -> {"x", "y", "z"},
>   PlotRange -> {{-4, 4}, {-4, 4}, {-3, 3}},
>   BoxRatios -> {8, 8, 6},
>   ViewPoint ->
>    {
>     viewR Cos[view\[Theta]] Sin[view\[Phi]],
>     viewR Sin[view\[Theta]] Sin[view\[Phi]],
>     viewR Cos[view\[Phi]]
>     },
>   PerformanceGoal -> "Quality"
>   ],
> 
>  {{c, 3}, 0, 4},
>  {{a, 1}, 0, 3},
>  {{sphereR, 0.1}, 0, 0.5},
>  {{tubeR, 0.05}, 0, 0.5},
>  {{opac, 0.5}, 0, 1},
>  {{mesh, 1}, 0, 16, 1},
>  {{tilt, N[ArcSin[a/c]]}, 0, \[Pi]/2, \[Pi]/36},
>  {{plotPts, 50}, 0, 100, 5},
>  {{viewR, 100}, 0, 100, 5},
>  {{view\[Theta], \[Pi]/2}, 0, 2 \[Pi], \[Pi]/36},
>  {{view\[Phi], \[Pi]/2}, 0, \[Pi], \[Pi]/36}
>  ]
> 
> 


[toc] | [next] | [standalone]


#6823

FromChris Young <cy56@comcast.net>
Date2011-11-29 13:06 +0000
Message-ID<jb2ld2$6q5$1@smc.vnet.net>
In reply to#6810
This looks like a great idea. Thanks very much. Unfortunately, I can't 
seem to find a C compiler on my Mac. Maybe Apple is charging for the 
development package now, I don't know. I'll look into it.

In[80]:= Needs["CCompilerDriver`"]
In[86]:= CCompilers[]
Out[86]= {}

On 2011-11-29 12:10:24 +0000, Patrick Scheibe said:

> Hi,
> 
> first you could compile your torus-function and compare the runtimes
> 
> torus[c_, a_, u_, v_] := {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u],
> a Sin[v]};
> torusCompiled =
>  Compile[{{c, _Real}, {a, _Real}, {u, _Real}, {v, _Real}},
>   {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u], a Sin[v]},
>   CompilationTarget -> "C"];
> 
> In[38]:= First[
>    AbsoluteTiming[Do[#[1.3, 0.3, 2.3, 4.5], {1000000}]]] & /@ {torus,
>   torusCompiled}
> 
> Out[38]= {5.190318, 0.863473}
> 
> and then you could set MaxRecursion to a higher value. Since then the
> runtime drops further, you could use ControlActive to use a very fast
> version, when you use the sliders. See the code at the end.
> 
> Your "equator" is not the only unwanted boundary, but you don't see the
> other one. These are the lines where your PlotRange ends. The doc to
> BoundaryStyle says
> 
> "For 3D graphics, it is also used at the boundary of regions defined by
> PlotRange."
> 
> So these lines are at 0 and 2Pi for both of your variables. I have no
> idea how to turn them off.
> 
> Cheers
> Patrick
> 
> Manipulate[
>  ParametricPlot3D[
>   torusCompiled[c, a, u, v], {u, 0, 2 \[Pi]}, {v, 0, 2 \[Pi]},
>   MeshFunctions -> {{x, y, z, \[Theta], \[Phi]} \[Function]
>      z + Tan[tilt] x},
>   RegionFunction -> ({x, y, z, \[Theta], \[Phi]} \[Function]
>      z <= -Tan[tilt] x),
>   Mesh -> mesh,
>   MaxRecursion -> ControlActive[0, 5],
>   MeshStyle -> {Lighter[Yellow], Tube[tubeR]},
>   BoundaryStyle -> {Lighter[Red], Tube[tubeR]},
>   PlotStyle -> {Orange, Opacity[opac]},
>   PlotPoints -> ControlActive[10, plotPts],
>   Axes -> True,
>   AxesLabel -> {"x", "y", "z"},
>   PlotRange -> {{-4, 4}, {-4, 4}, {-3, 3}},
>   BoxRatios -> {8, 8, 6},
>   ViewPoint ->
>    {
>     viewR Cos[view\[Theta]] Sin[view\[Phi]],
>     viewR Sin[view\[Theta]] Sin[view\[Phi]],
>     viewR Cos[view\[Phi]]
>     },
>   PerformanceGoal -> "Quality"
>   ],
> 
>  {{c, 3}, 0, 4},
>  {{a, 1}, 0, 3},
>  {{sphereR, 0.1}, 0, 0.5},
>  {{tubeR, 0.05}, 0, 0.5},
>  {{opac, 0.5}, 0, 1},
>  {{mesh, 0}, 0, 16, 1},
>  {{tilt, N[ArcSin[a/c]]}, 0, \[Pi]/2, \[Pi]/36},
>  {{plotPts, 50}, 0, 200, 5},
>  {{viewR, 100}, 0, 100, 5},
>  {{view\[Theta], \[Pi]/2}, 0, 2 \[Pi], \[Pi]/36},
>  {{view\[Phi], \[Pi]/2}, 0, \[Pi], \[Pi]/36}
>  ]

[toc] | [prev] | [next] | [standalone]


#6847

FromPatrick Scheibe <pscheibe@trm.uni-leipzig.de>
Date2011-11-30 08:31 +0000
Message-ID<jb4pk4$gus$1@smc.vnet.net>
In reply to#6810
Hi,

you have to install the XCode-tools separately, but they should be on
one of the DVDs you got. I always get XCode when buying an Apple.

But you don't have to use necessarily the "C" option. Just use Compile
and it should be faster.

Cheers
Patrick


On Tue, 2011-11-29 at 08:06 -0500, Chris Young wrote:
> This looks like a great idea. Thanks very much. Unfortunately, I can't 
> seem to find a C compiler on my Mac. Maybe Apple is charging for the 
> development package now, I don't know. I'll look into it.
> 
> In[80]:= Needs["CCompilerDriver`"]
> In[86]:= CCompilers[]
> Out[86]= {}
> 
> On 2011-11-29 12:10:24 +0000, Patrick Scheibe said:
> 
> > Hi,
> > 
> > first you could compile your torus-function and compare the runtimes
> > 
> > torus[c_, a_, u_, v_] := {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u],
> > a Sin[v]};
> > torusCompiled =
> >  Compile[{{c, _Real}, {a, _Real}, {u, _Real}, {v, _Real}},
> >   {(c + a Cos[v]) Cos[u], (c + a Cos[v]) Sin[u], a Sin[v]},
> >   CompilationTarget -> "C"];
> > 
> > In[38]:= First[
> >    AbsoluteTiming[Do[#[1.3, 0.3, 2.3, 4.5], {1000000}]]] & /@ {torus,
> >   torusCompiled}
> > 
> > Out[38]= {5.190318, 0.863473}
> > 
> > and then you could set MaxRecursion to a higher value. Since then the
> > runtime drops further, you could use ControlActive to use a very fast
> > version, when you use the sliders. See the code at the end.
> > 
> > Your "equator" is not the only unwanted boundary, but you don't see the
> > other one. These are the lines where your PlotRange ends. The doc to
> > BoundaryStyle says
> > 
> > "For 3D graphics, it is also used at the boundary of regions defined by
> > PlotRange."
> > 
> > So these lines are at 0 and 2Pi for both of your variables. I have no
> > idea how to turn them off.
> > 
> > Cheers
> > Patrick
> > 
> > Manipulate[
> >  ParametricPlot3D[
> >   torusCompiled[c, a, u, v], {u, 0, 2 \[Pi]}, {v, 0, 2 \[Pi]},
> >   MeshFunctions -> {{x, y, z, \[Theta], \[Phi]} \[Function]
> >      z + Tan[tilt] x},
> >   RegionFunction -> ({x, y, z, \[Theta], \[Phi]} \[Function]
> >      z <= -Tan[tilt] x),
> >   Mesh -> mesh,
> >   MaxRecursion -> ControlActive[0, 5],
> >   MeshStyle -> {Lighter[Yellow], Tube[tubeR]},
> >   BoundaryStyle -> {Lighter[Red], Tube[tubeR]},
> >   PlotStyle -> {Orange, Opacity[opac]},
> >   PlotPoints -> ControlActive[10, plotPts],
> >   Axes -> True,
> >   AxesLabel -> {"x", "y", "z"},
> >   PlotRange -> {{-4, 4}, {-4, 4}, {-3, 3}},
> >   BoxRatios -> {8, 8, 6},
> >   ViewPoint ->
> >    {
> >     viewR Cos[view\[Theta]] Sin[view\[Phi]],
> >     viewR Sin[view\[Theta]] Sin[view\[Phi]],
> >     viewR Cos[view\[Phi]]
> >     },
> >   PerformanceGoal -> "Quality"
> >   ],
> > 
> >  {{c, 3}, 0, 4},
> >  {{a, 1}, 0, 3},
> >  {{sphereR, 0.1}, 0, 0.5},
> >  {{tubeR, 0.05}, 0, 0.5},
> >  {{opac, 0.5}, 0, 1},
> >  {{mesh, 0}, 0, 16, 1},
> >  {{tilt, N[ArcSin[a/c]]}, 0, \[Pi]/2, \[Pi]/36},
> >  {{plotPts, 50}, 0, 200, 5},
> >  {{viewR, 100}, 0, 100, 5},
> >  {{view\[Theta], \[Pi]/2}, 0, 2 \[Pi], \[Pi]/36},
> >  {{view\[Phi], \[Pi]/2}, 0, \[Pi], \[Pi]/36}
> >  ]
> 
> 


[toc] | [prev] | [standalone]


Back to top | Article view | comp.soft-sys.math.mathematica


csiph-web