Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #4756 > unrolled thread
| Started by | DrMajorBob <btreat1@austin.rr.com> |
|---|---|
| First post | 2011-09-05 11:16 +0000 |
| Last post | 2011-09-08 09:30 +0000 |
| Articles | 8 — 3 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: Quit versus Clear["Global`*"] DrMajorBob <btreat1@austin.rr.com> - 2011-09-05 11:16 +0000
Re: Quit versus Clear["Global`*"] DrMajorBob <btreat1@austin.rr.com> - 2011-09-06 08:04 +0000
Re: Quit versus Clear["Global`*"] "Kevin J. McCann" <Kevin.McCann@umbc.edu> - 2011-09-07 09:50 +0000
Re: Quit versus Clear["Global`*"] "Kevin J. McCann" <kjm@KevinMcCann.com> - 2011-09-06 08:07 +0000
Re: Quit versus Clear["Global`*"] "Kevin J. McCann" <kjm@KevinMcCann.com> - 2011-09-07 09:44 +0000
Re: Quit versus Clear["Global`*"] DrMajorBob <btreat1@austin.rr.com> - 2011-09-07 09:41 +0000
Re: Quit versus Clear["Global`*"] "Kevin J. McCann" <Kevin.McCann@umbc.edu> - 2011-09-07 12:30 +0000
Re: Quit versus Clear["Global`*"] DrMajorBob <btreat1@austin.rr.com> - 2011-09-08 09:30 +0000
| From | DrMajorBob <btreat1@austin.rr.com> |
|---|---|
| Date | 2011-09-05 11:16 +0000 |
| Subject | Re: Quit versus Clear["Global`*"] |
| Message-ID | <j42b3a$rrv$1@smc.vnet.net> |
No. For that, you need: Quit Bobby On Sun, 04 Sep 2011 17:06:32 -0500, Themis Matsoukas <tmatsoukas@me.com> wrote: > So, if I use ClearAll["Global`*"] at the beginning of a notebook and > execute all the cells, is it the same as running on a fresh kernel? > > Themis > -- DrMajorBob@yahoo.com
[toc] | [next] | [standalone]
| From | DrMajorBob <btreat1@austin.rr.com> |
|---|---|
| Date | 2011-09-06 08:04 +0000 |
| Message-ID | <j44k71$94u$1@smc.vnet.net> |
| In reply to | #4756 |
OK, putting it in a separate cell didn't help, but if you Quit while
evaluating initialization cells... you'll stop evaluating them. (Not so
surprising, really.)
So instead of Quit, add Clear and ClearAll for everything that needs it.
In the code of your example, there's nothing that needs it.
Whenever I define a function that could EVER need Clear, I precede that
definition with Clear. To start all over, I can go to the menus and select
Evaluate>Evaluate Initialization Cells. When in doubt, I quit the kernel
with Evaluation>Quit Kernel, particularly if evaluating code is in an
infinite (or very long?) loop.
spell and spell1 are Off by default at my machine, by the way. I'm not
sure what that would be so here, but not at your machine. I used to have
to turn them off manually, but that was a long time ago.
Bobby
On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann <kjm@kevinmccann.com>
wrote:
> I have to wait for Quit to finish executing, and then execute the rest.
>
> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>> Put Quit in a cell by itself.
>>
>> Bobby
>>
>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>> <kjm@kevinmccann.com> wrote:
>>
>>> This is a related observation to the use of Quit.
>>>
>>> I have an initialization cell at the top of most of my notebooks that
>>> loads my favorite packages and sets options. If I put Quit at the top
>>> of all that, and then execute the whole section, the Quit seems to
>>> override everything, i.e. at the end nothing is defined.
>>>
>>> It appears that while Quit is executing, the other commands do, but
>>> then the Quit kills off the results. I am not explaining it well, so
>>> here is some abbreviated code from one of my nb's. Dump it all into an
>>> Input cell and execute. At the end you will see that x is not defined.
>>>
>>> Kevin
>>>
>>> Quit
>>> Off[General::spell];
>>> Off[General::spell1];
>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
>>> SetOptions[Plot,
>>> Frame -> True,
>>> FrameStyle -> AbsoluteThickness[2],
>>> GridLines -> Automatic,
>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>> AbsoluteThickness[3]}, {Blue,
>>> AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
>>> BaseStyle -> bs
>>> ];
>>> SetOptions[ListPlot,
>>> Frame -> True,
>>> FrameStyle -> AbsoluteThickness[2],
>>> GridLines -> Automatic,
>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>> BaseStyle -> bs
>>> ];
>>> $Post := (If[MatrixQ[#], MatrixForm[#], #] &)
>>> x = 22/7.;
>>>
>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>> No. For that, you need:
>>>>
>>>> Quit
>>>>
>>>> Bobby
>>>>
>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>> Matsoukas<tmatsoukas@me.com>
>>>> wrote:
>>>>
>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook and
>>>>> execute all the cells, is it the same as running on a fresh kernel?
>>>>>
>>>>> Themis
>>>>>
>>>>
>>>>
>>
>>
--
DrMajorBob@yahoo.com
[toc] | [prev] | [next] | [standalone]
| From | "Kevin J. McCann" <Kevin.McCann@umbc.edu> |
|---|---|
| Date | 2011-09-07 09:50 +0000 |
| Message-ID | <j47eon$l70$1@smc.vnet.net> |
| In reply to | #4785 |
Actually the code was just an example. I teach a class in Mathematica,
and I would like the students to put a Quit at the top of each homework
they turn in; so, then I can just select all and execute. The Quit
would, of course, wipe out all previously defined things, so we start
with a clean slate. Apparently, though, this won't work for the
aforementioned reasons.
Kevin
On 9/6/2011 4:04 AM, DrMajorBob wrote:
> OK, putting it in a separate cell didn't help, but if you Quit while
> evaluating initialization cells... you'll stop evaluating them. (Not so
> surprising, really.)
>
> So instead of Quit, add Clear and ClearAll for everything that needs it.
> In the code of your example, there's nothing that needs it.
>
> Whenever I define a function that could EVER need Clear, I precede that
> definition with Clear. To start all over, I can go to the menus and select
> Evaluate>Evaluate Initialization Cells. When in doubt, I quit the kernel
> with Evaluation>Quit Kernel, particularly if evaluating code is in an
> infinite (or very long?) loop.
>
> spell and spell1 are Off by default at my machine, by the way. I'm not
> sure what that would be so here, but not at your machine. I used to have
> to turn them off manually, but that was a long time ago.
>
> Bobby
>
> On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann<kjm@kevinmccann.com>
> wrote:
>
>> I have to wait for Quit to finish executing, and then execute the rest.
>>
>> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>>> Put Quit in a cell by itself.
>>>
>>> Bobby
>>>
>>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>>> <kjm@kevinmccann.com> wrote:
>>>
>>>> This is a related observation to the use of Quit.
>>>>
>>>> I have an initialization cell at the top of most of my notebooks that
>>>> loads my favorite packages and sets options. If I put Quit at the top
>>>> of all that, and then execute the whole section, the Quit seems to
>>>> override everything, i.e. at the end nothing is defined.
>>>>
>>>> It appears that while Quit is executing, the other commands do, but
>>>> then the Quit kills off the results. I am not explaining it well, so
>>>> here is some abbreviated code from one of my nb's. Dump it all into an
>>>> Input cell and execute. At the end you will see that x is not defined.
>>>>
>>>> Kevin
>>>>
>>>> Quit
>>>> Off[General::spell];
>>>> Off[General::spell1];
>>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
>>>> SetOptions[Plot,
>>>> Frame -> True,
>>>> FrameStyle -> AbsoluteThickness[2],
>>>> GridLines -> Automatic,
>>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>>> AbsoluteThickness[3]}, {Blue,
>>>> AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
>>>> BaseStyle -> bs
>>>> ];
>>>> SetOptions[ListPlot,
>>>> Frame -> True,
>>>> FrameStyle -> AbsoluteThickness[2],
>>>> GridLines -> Automatic,
>>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>>> BaseStyle -> bs
>>>> ];
>>>> $Post := (If[MatrixQ[#], MatrixForm[#], #]&)
>>>> x = 22/7.;
>>>>
>>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>>> No. For that, you need:
>>>>>
>>>>> Quit
>>>>>
>>>>> Bobby
>>>>>
>>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>>> Matsoukas<tmatsoukas@me.com>
>>>>> wrote:
>>>>>
>>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook and
>>>>>> execute all the cells, is it the same as running on a fresh kernel?
>>>>>>
>>>>>> Themis
>>>>>>
>>>>>
>>>>>
>>>
>>>
>
>
[toc] | [prev] | [next] | [standalone]
| From | "Kevin J. McCann" <kjm@KevinMcCann.com> |
|---|---|
| Date | 2011-09-06 08:07 +0000 |
| Message-ID | <j44kcp$96n$1@smc.vnet.net> |
| In reply to | #4756 |
This is a related observation to the use of Quit.
I have an initialization cell at the top of most of my notebooks that
loads my favorite packages and sets options. If I put Quit at the top of
all that, and then execute the whole section, the Quit seems to override
everything, i.e. at the end nothing is defined.
It appears that while Quit is executing, the other commands do, but then
the Quit kills off the results. I am not explaining it well, so here is
some abbreviated code from one of my nb's. Dump it all into an Input
cell and execute. At the end you will see that x is not defined.
Kevin
Quit
Off[General::spell];
Off[General::spell1];
bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
SetOptions[Plot,
Frame -> True,
FrameStyle -> AbsoluteThickness[2],
GridLines -> Automatic,
PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
AbsoluteThickness[3]}, {Blue,
AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
BaseStyle -> bs
];
SetOptions[ListPlot,
Frame -> True,
FrameStyle -> AbsoluteThickness[2],
GridLines -> Automatic,
PlotStyle -> {Blue, AbsolutePointSize[2]},
BaseStyle -> bs
];
$Post := (If[MatrixQ[#], MatrixForm[#], #] &)
x = 22/7.;
On 9/5/2011 7:16 AM, DrMajorBob wrote:
> No. For that, you need:
>
> Quit
>
> Bobby
>
> On Sun, 04 Sep 2011 17:06:32 -0500, Themis Matsoukas<tmatsoukas@me.com>
> wrote:
>
>> So, if I use ClearAll["Global`*"] at the beginning of a notebook and
>> execute all the cells, is it the same as running on a fresh kernel?
>>
>> Themis
>>
>
>
[toc] | [prev] | [next] | [standalone]
| From | "Kevin J. McCann" <kjm@KevinMcCann.com> |
|---|---|
| Date | 2011-09-07 09:44 +0000 |
| Message-ID | <j47ee6$l43$1@smc.vnet.net> |
| In reply to | #4756 |
I guess the point here is that when commands are listed sequentially, at
least with Quit at the top, they are not carried out that way, but
perhaps in some parallel fashion. This is not documented anywhere, and I
don't think it is expected behavior. Further, I think it is not desirable.
Kevin
On 9/5/2011 4:23 PM, DrMajorBob wrote:
> OK, putting it in a separate cell didn't help, but if you Quit while
> evaluating initialization cells... you'll stop evaluating them. (Not
> so surprising, really.)
>
> So instead of Quit, add Clear and ClearAll for everything that needs
> it. In the code of your example, there's nothing that needs it.
>
> Whenever I define a function that could EVER need Clear, I precede
> that definition with Clear. To start all over, I can go to the menus
> and select Evaluate>Evaluate Initialization Cells. When in doubt, I
> quit the kernel with Evaluation>Quit Kernel, particularly if
> evaluating code is in an infinite (or very long?) loop.
>
> spell and spell1 are Off by default at my machine, by the way. I'm not
> sure what that would be so here, but not at your machine. I used to
> have to turn them off manually, but that was a long time ago.
>
> Bobby
>
> On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann
> <kjm@kevinmccann.com> wrote:
>
>> I have to wait for Quit to finish executing, and then execute the rest.
>>
>> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>>> Put Quit in a cell by itself.
>>>
>>> Bobby
>>>
>>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>>> <kjm@kevinmccann.com> wrote:
>>>
>>>> This is a related observation to the use of Quit.
>>>>
>>>> I have an initialization cell at the top of most of my notebooks
>>>> that loads my favorite packages and sets options. If I put Quit at
>>>> the top of all that, and then execute the whole section, the Quit
>>>> seems to override everything, i.e. at the end nothing is defined.
>>>>
>>>> It appears that while Quit is executing, the other commands do, but
>>>> then the Quit kills off the results. I am not explaining it well,
>>>> so here is some abbreviated code from one of my nb's. Dump it all
>>>> into an Input cell and execute. At the end you will see that x is
>>>> not defined.
>>>>
>>>> Kevin
>>>>
>>>> Quit
>>>> Off[General::spell];
>>>> Off[General::spell1];
>>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
>>>> SetOptions[Plot,
>>>> Frame -> True,
>>>> FrameStyle -> AbsoluteThickness[2],
>>>> GridLines -> Automatic,
>>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>>> AbsoluteThickness[3]}, {Blue,
>>>> AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
>>>> BaseStyle -> bs
>>>> ];
>>>> SetOptions[ListPlot,
>>>> Frame -> True,
>>>> FrameStyle -> AbsoluteThickness[2],
>>>> GridLines -> Automatic,
>>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>>> BaseStyle -> bs
>>>> ];
>>>> $Post := (If[MatrixQ[#], MatrixForm[#], #] &)
>>>> x = 22/7.;
>>>>
>>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>>> No. For that, you need:
>>>>>
>>>>> Quit
>>>>>
>>>>> Bobby
>>>>>
>>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>>> Matsoukas<tmatsoukas@me.com>
>>>>> wrote:
>>>>>
>>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook and
>>>>>> execute all the cells, is it the same as running on a fresh kernel?
>>>>>>
>>>>>> Themis
>>>>>>
>>>>>
>>>>>
>>>
>>>
>
>
[toc] | [prev] | [next] | [standalone]
| From | DrMajorBob <btreat1@austin.rr.com> |
|---|---|
| Date | 2011-09-07 09:41 +0000 |
| Message-ID | <j47e8e$l24$1@smc.vnet.net> |
| In reply to | #4756 |
No, the point is that when Quit is the first command, the kernel quits...
rather than continuing to evaluate initialization cells. That appears
entirely sequential, to me.
Bobby
On Tue, 06 Sep 2011 05:13:30 -0500, Kevin J. McCann <kjm@kevinmccann.com>
wrote:
> I guess the point here is that when commands are listed sequentially, at
> least with Quit at the top, they are not carried out that way, but
> perhaps in some parallel fashion. This is not documented anywhere, and I
> don't think it is expected behavior. Further, I think it is not
> desirable.
>
> Kevin
>
> On 9/5/2011 4:23 PM, DrMajorBob wrote:
>> OK, putting it in a separate cell didn't help, but if you Quit while
>> evaluating initialization cells... you'll stop evaluating them. (Not so
>> surprising, really.)
>>
>> So instead of Quit, add Clear and ClearAll for everything that needs
>> it. In the code of your example, there's nothing that needs it.
>>
>> Whenever I define a function that could EVER need Clear, I precede that
>> definition with Clear. To start all over, I can go to the menus and
>> select Evaluate>Evaluate Initialization Cells. When in doubt, I quit
>> the kernel with Evaluation>Quit Kernel, particularly if evaluating code
>> is in an infinite (or very long?) loop.
>>
>> spell and spell1 are Off by default at my machine, by the way. I'm not
>> sure what that would be so here, but not at your machine. I used to
>> have to turn them off manually, but that was a long time ago.
>>
>> Bobby
>>
>> On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann
>> <kjm@kevinmccann.com> wrote:
>>
>>> I have to wait for Quit to finish executing, and then execute the rest.
>>>
>>> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>>>> Put Quit in a cell by itself.
>>>>
>>>> Bobby
>>>>
>>>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>>>> <kjm@kevinmccann.com> wrote:
>>>>
>>>>> This is a related observation to the use of Quit.
>>>>>
>>>>> I have an initialization cell at the top of most of my notebooks
>>>>> that loads my favorite packages and sets options. If I put Quit at
>>>>> the top of all that, and then execute the whole section, the Quit
>>>>> seems to override everything, i.e. at the end nothing is defined.
>>>>>
>>>>> It appears that while Quit is executing, the other commands do, but
>>>>> then the Quit kills off the results. I am not explaining it well, so
>>>>> here is some abbreviated code from one of my nb's. Dump it all into
>>>>> an Input cell and execute. At the end you will see that x is not
>>>>> defined.
>>>>>
>>>>> Kevin
>>>>>
>>>>> Quit
>>>>> Off[General::spell];
>>>>> Off[General::spell1];
>>>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
>>>>> SetOptions[Plot,
>>>>> Frame -> True,
>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>> GridLines -> Automatic,
>>>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>>>> AbsoluteThickness[3]}, {Blue,
>>>>> AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
>>>>> BaseStyle -> bs
>>>>> ];
>>>>> SetOptions[ListPlot,
>>>>> Frame -> True,
>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>> GridLines -> Automatic,
>>>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>>>> BaseStyle -> bs
>>>>> ];
>>>>> $Post := (If[MatrixQ[#], MatrixForm[#], #] &)
>>>>> x = 22/7.;
>>>>>
>>>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>>>> No. For that, you need:
>>>>>>
>>>>>> Quit
>>>>>>
>>>>>> Bobby
>>>>>>
>>>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>>>> Matsoukas<tmatsoukas@me.com>
>>>>>> wrote:
>>>>>>
>>>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook
>>>>>>> and
>>>>>>> execute all the cells, is it the same as running on a fresh kernel?
>>>>>>>
>>>>>>> Themis
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>
>>
--
DrMajorBob@yahoo.com
[toc] | [prev] | [next] | [standalone]
| From | "Kevin J. McCann" <Kevin.McCann@umbc.edu> |
|---|---|
| Date | 2011-09-07 12:30 +0000 |
| Message-ID | <j47o5g$mva$1@smc.vnet.net> |
| In reply to | #4814 |
But then shouldn't the kernel restart on the next line? If not, then
when would the kernel restart? Never? After we wait a few seconds?
Quit (* the kernel quits *)
x=1; (* shouldn't the kernel restart here? *)
Actually, it appears that Quit takes some time to execute, and in
parallel, further commands execute, but then their results are killed off.
Kevin
On 9/7/2011 5:41 AM, DrMajorBob wrote:
> No, the point is that when Quit is the first command, the kernel quits...
> rather than continuing to evaluate initialization cells. That appears
> entirely sequential, to me.
>
> Bobby
>
> On Tue, 06 Sep 2011 05:13:30 -0500, Kevin J. McCann<kjm@kevinmccann.com>
> wrote:
>
>> I guess the point here is that when commands are listed sequentially, at
>> least with Quit at the top, they are not carried out that way, but
>> perhaps in some parallel fashion. This is not documented anywhere, and I
>> don't think it is expected behavior. Further, I think it is not
>> desirable.
>>
>> Kevin
>>
>> On 9/5/2011 4:23 PM, DrMajorBob wrote:
>>> OK, putting it in a separate cell didn't help, but if you Quit while
>>> evaluating initialization cells... you'll stop evaluating them. (Not so
>>> surprising, really.)
>>>
>>> So instead of Quit, add Clear and ClearAll for everything that needs
>>> it. In the code of your example, there's nothing that needs it.
>>>
>>> Whenever I define a function that could EVER need Clear, I precede that
>>> definition with Clear. To start all over, I can go to the menus and
>>> select Evaluate>Evaluate Initialization Cells. When in doubt, I quit
>>> the kernel with Evaluation>Quit Kernel, particularly if evaluating code
>>> is in an infinite (or very long?) loop.
>>>
>>> spell and spell1 are Off by default at my machine, by the way. I'm not
>>> sure what that would be so here, but not at your machine. I used to
>>> have to turn them off manually, but that was a long time ago.
>>>
>>> Bobby
>>>
>>> On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann
>>> <kjm@kevinmccann.com> wrote:
>>>
>>>> I have to wait for Quit to finish executing, and then execute the rest.
>>>>
>>>> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>>>>> Put Quit in a cell by itself.
>>>>>
>>>>> Bobby
>>>>>
>>>>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>>>>> <kjm@kevinmccann.com> wrote:
>>>>>
>>>>>> This is a related observation to the use of Quit.
>>>>>>
>>>>>> I have an initialization cell at the top of most of my notebooks
>>>>>> that loads my favorite packages and sets options. If I put Quit at
>>>>>> the top of all that, and then execute the whole section, the Quit
>>>>>> seems to override everything, i.e. at the end nothing is defined.
>>>>>>
>>>>>> It appears that while Quit is executing, the other commands do, but
>>>>>> then the Quit kills off the results. I am not explaining it well, so
>>>>>> here is some abbreviated code from one of my nb's. Dump it all into
>>>>>> an Input cell and execute. At the end you will see that x is not
>>>>>> defined.
>>>>>>
>>>>>> Kevin
>>>>>>
>>>>>> Quit
>>>>>> Off[General::spell];
>>>>>> Off[General::spell1];
>>>>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight -> Bold};
>>>>>> SetOptions[Plot,
>>>>>> Frame -> True,
>>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>>> GridLines -> Automatic,
>>>>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>>>>> AbsoluteThickness[3]}, {Blue,
>>>>>> AbsoluteThickness[3]}, {Darker@Green, AbsoluteThickness[3]}},
>>>>>> BaseStyle -> bs
>>>>>> ];
>>>>>> SetOptions[ListPlot,
>>>>>> Frame -> True,
>>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>>> GridLines -> Automatic,
>>>>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>>>>> BaseStyle -> bs
>>>>>> ];
>>>>>> $Post := (If[MatrixQ[#], MatrixForm[#], #]&)
>>>>>> x = 22/7.;
>>>>>>
>>>>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>>>>> No. For that, you need:
>>>>>>>
>>>>>>> Quit
>>>>>>>
>>>>>>> Bobby
>>>>>>>
>>>>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>>>>> Matsoukas<tmatsoukas@me.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook
>>>>>>>> and
>>>>>>>> execute all the cells, is it the same as running on a fresh kernel?
>>>>>>>>
>>>>>>>> Themis
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>
>>>
>
>
[toc] | [prev] | [next] | [standalone]
| From | DrMajorBob <btreat1@austin.rr.com> |
|---|---|
| Date | 2011-09-08 09:30 +0000 |
| Message-ID | <j4a1v1$436$1@smc.vnet.net> |
| In reply to | #4756 |
I don't think anything is happening in parallel; it takes TWO or more
kernels for that.
Bobby
On Wed, 07 Sep 2011 07:29:35 -0500, Kevin J. McCann
<Kevin.McCann@umbc.edu> wrote:
> But then shouldn't the kernel restart on the next line? If not, then
> when would the kernel restart? Never? After we wait a few seconds?
>
> Quit (* the kernel quits *)
> x=1; (* shouldn't the kernel restart here? *)
>
> Actually, it appears that Quit takes some time to execute, and in
> parallel, further commands execute, but then their results are killed
> off.
>
> Kevin
>
> On 9/7/2011 5:41 AM, DrMajorBob wrote:
>> No, the point is that when Quit is the first command, the kernel
>> quits...
>> rather than continuing to evaluate initialization cells. That appears
>> entirely sequential, to me.
>>
>> Bobby
>>
>> On Tue, 06 Sep 2011 05:13:30 -0500, Kevin J. McCann<kjm@kevinmccann.com>
>> wrote:
>>
>>> I guess the point here is that when commands are listed sequentially,
>>> at
>>> least with Quit at the top, they are not carried out that way, but
>>> perhaps in some parallel fashion. This is not documented anywhere, and
>>> I
>>> don't think it is expected behavior. Further, I think it is not
>>> desirable.
>>>
>>> Kevin
>>>
>>> On 9/5/2011 4:23 PM, DrMajorBob wrote:
>>>> OK, putting it in a separate cell didn't help, but if you Quit while
>>>> evaluating initialization cells... you'll stop evaluating them. (Not
>>>> so
>>>> surprising, really.)
>>>>
>>>> So instead of Quit, add Clear and ClearAll for everything that needs
>>>> it. In the code of your example, there's nothing that needs it.
>>>>
>>>> Whenever I define a function that could EVER need Clear, I precede
>>>> that
>>>> definition with Clear. To start all over, I can go to the menus and
>>>> select Evaluate>Evaluate Initialization Cells. When in doubt, I quit
>>>> the kernel with Evaluation>Quit Kernel, particularly if evaluating
>>>> code
>>>> is in an infinite (or very long?) loop.
>>>>
>>>> spell and spell1 are Off by default at my machine, by the way. I'm not
>>>> sure what that would be so here, but not at your machine. I used to
>>>> have to turn them off manually, but that was a long time ago.
>>>>
>>>> Bobby
>>>>
>>>> On Mon, 05 Sep 2011 15:00:46 -0500, Kevin J. McCann
>>>> <kjm@kevinmccann.com> wrote:
>>>>
>>>>> I have to wait for Quit to finish executing, and then execute the
>>>>> rest.
>>>>>
>>>>> On 9/5/2011 1:40 PM, DrMajorBob wrote:
>>>>>> Put Quit in a cell by itself.
>>>>>>
>>>>>> Bobby
>>>>>>
>>>>>> On Mon, 05 Sep 2011 07:15:08 -0500, Kevin J. McCann
>>>>>> <kjm@kevinmccann.com> wrote:
>>>>>>
>>>>>>> This is a related observation to the use of Quit.
>>>>>>>
>>>>>>> I have an initialization cell at the top of most of my notebooks
>>>>>>> that loads my favorite packages and sets options. If I put Quit at
>>>>>>> the top of all that, and then execute the whole section, the Quit
>>>>>>> seems to override everything, i.e. at the end nothing is defined.
>>>>>>>
>>>>>>> It appears that while Quit is executing, the other commands do, but
>>>>>>> then the Quit kills off the results. I am not explaining it well,
>>>>>>> so
>>>>>>> here is some abbreviated code from one of my nb's. Dump it all into
>>>>>>> an Input cell and execute. At the end you will see that x is not
>>>>>>> defined.
>>>>>>>
>>>>>>> Kevin
>>>>>>>
>>>>>>> Quit
>>>>>>> Off[General::spell];
>>>>>>> Off[General::spell1];
>>>>>>> bs = {FontFamily -> "Arial", FontSize -> 14, FontWeight ->
>>>>>>> Bold};
>>>>>>> SetOptions[Plot,
>>>>>>> Frame -> True,
>>>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>>>> GridLines -> Automatic,
>>>>>>> PlotStyle -> {{Red, AbsoluteThickness[3]}, {Black,
>>>>>>> AbsoluteThickness[3]}, {Blue,
>>>>>>> AbsoluteThickness[3]}, {Darker@Green,
>>>>>>> AbsoluteThickness[3]}},
>>>>>>> BaseStyle -> bs
>>>>>>> ];
>>>>>>> SetOptions[ListPlot,
>>>>>>> Frame -> True,
>>>>>>> FrameStyle -> AbsoluteThickness[2],
>>>>>>> GridLines -> Automatic,
>>>>>>> PlotStyle -> {Blue, AbsolutePointSize[2]},
>>>>>>> BaseStyle -> bs
>>>>>>> ];
>>>>>>> $Post := (If[MatrixQ[#], MatrixForm[#], #]&)
>>>>>>> x = 22/7.;
>>>>>>>
>>>>>>> On 9/5/2011 7:16 AM, DrMajorBob wrote:
>>>>>>>> No. For that, you need:
>>>>>>>>
>>>>>>>> Quit
>>>>>>>>
>>>>>>>> Bobby
>>>>>>>>
>>>>>>>> On Sun, 04 Sep 2011 17:06:32 -0500, Themis
>>>>>>>> Matsoukas<tmatsoukas@me.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> So, if I use ClearAll["Global`*"] at the beginning of a notebook
>>>>>>>>> and
>>>>>>>>> execute all the cells, is it the same as running on a fresh
>>>>>>>>> kernel?
>>>>>>>>>
>>>>>>>>> Themis
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>
>>
>
--
DrMajorBob@yahoo.com
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web