Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #4654 > unrolled thread
| Started by | John Fultz <jfultz@wolfram.com> |
|---|---|
| First post | 2011-08-30 00:02 +0000 |
| Last post | 2011-09-01 10:06 +0000 |
| Articles | 5 — 2 participants |
Back to article view | Back to comp.soft-sys.math.mathematica
Re: Defective Mesh lines in ContourPlot3D John Fultz <jfultz@wolfram.com> - 2011-08-30 00:02 +0000
Re: Defective Mesh lines in ContourPlot3D Roger Bagula <roger.bagula@gmail.com> - 2011-08-31 10:06 +0000
Re: Defective Mesh lines in ContourPlot3D Roger Bagula <roger.bagula@gmail.com> - 2011-08-31 10:06 +0000
Re: Defective Mesh lines in ContourPlot3D Roger Bagula <roger.bagula@gmail.com> - 2011-08-31 10:07 +0000
Re: Defective Mesh lines in ContourPlot3D Roger Bagula <roger.bagula@gmail.com> - 2011-09-01 10:06 +0000
| From | John Fultz <jfultz@wolfram.com> |
|---|---|
| Date | 2011-08-30 00:02 +0000 |
| Subject | Re: Defective Mesh lines in ContourPlot3D |
| Message-ID | <j3h9b7$ni4$1@smc.vnet.net> |
Version 8 has three rendering methods, controlled by the
RenderingOptions->{"Graphics3DRenderingEngine"} option:
DepthBuffer
Advantage - very fast
Disadvantage - absolutely unusable with transparency
BSPTree
Advantage - renders everything
Disadvantage - divvies up the polygons into a bazillion sub-polygons, which are
reordered during rotation. Most of this happens in the CPU, not the GPU. By
far, the slowest rendering method.
DepthPeeling
Advantage - renders most transparency fine, uses GPU hardware.
Disadvantage - some older video cards don't support it, a few (but rare)
outlying transparent cases don't work well.
V7 only had the first two options. What you're seeing is a complication
stemming from the facts that:
* There's a great deal of polygonal subdividision
* The mesh is also highly subdivided
* The mesh and the polygons are nearly (or sometimes exactly) coplanar polygons
In v7, there are two ways out of this. One is to prevent the BSPTree method
from being used by removing the transparency from the graphic. The second is to
prevent the coplanarity by changing how the mesh is rendered. There's an
undocumented usage of the MeshStyle option which would do this:
MeshStyle -> {{GrayLevel[.7], Tube[0.01]}}
In v8, the DepthPeeling method does a vastly better job with the transparent
version of the graphic. And, if your hardware supports it, DepthPeeling is what
Mathematica will use by default.
Sincerely,
John Fultz
jfultz@wolfram.com
User Interface Group
Wolfram Research, Inc.
On Mon, 29 Aug 2011 03:46:57 -0400 (EDT), Alexey Popkov wrote:
> Hello,
>
> I have a problem with rendering of Mesh lines on a 3D surface produced by
> ContourPlot3D in Mathematica 7.0.1:
>
> p=ContourPlot3D[x^4+y^4+z^4-(x^2+y^2+z^2)^2+3(x^2+y^2+z^2)==3,
> {x, -2,2}, {y, -2, 2}, {z,-2,2},
> BoundaryStyle->Directive[Black,Thickness[.003]],
> ContourStyle->Directive[Orange,Opacity[0.5],Specularity[White,300]],
> PlotPoints->90,Ticks->None,
> MeshStyle->Directive[GrayLevel[.7],Thickness[.001]],
> Lighting->{{"Directional",RGBColor[1,1,1],
> {ImageScaled@{1,0,1},ImageScaled@{0,0,0}}}}];
> p=Graphics[Inset[p,{0,0},Center,{1,1}],
> PlotRange->{{-.5,.5},{-.5,.5}},Frame->True]
>
> (see screenshot here: http://i.stack.imgur.com/zBtYC.png )
>
> Let us to look closer on Mesh lines:
>
> Show[p, PlotRange -> {{-.16, -.05}, {0, .1}}]
>
> (see screenshot here: http://i.stack.imgur.com/JBkcc.png )
>
> You can see that gray Mesh lines are overlapped by surface-forming
> triangles in many places and even look dashed. Is there a way to avoid
> this?
[toc] | [next] | [standalone]
| From | Roger Bagula <roger.bagula@gmail.com> |
|---|---|
| Date | 2011-08-31 10:06 +0000 |
| Message-ID | <j3l12k$bse$1@smc.vnet.net> |
| In reply to | #4654 |
John Flutz,
I tried two experiments with the mesh-tubes
and only one worked:
Clear[x, y, a, g, p, k]
x[t_, p_] := (1 - p)*Cos[t]
y[t_, p_] := (1 + p)*Sin[t]
p = (k + 1)/10
ga = ParametricPlot3D[{x[Pi*t, p], y[Pi*t, p], p}, {t, -1, 1}, {p, -1,
1}, Axes -> False, Boxed -> False, PlotPoints -> 60,
MeshStyle -> {{GrayLevel[.7], Tube[0.1]}}]
Export["RuledTetrahedron_tubelines.stl", ga]
The Mesh tubes show up in the stl model.
Roger Bagula
[toc] | [prev] | [next] | [standalone]
| From | Roger Bagula <roger.bagula@gmail.com> |
|---|---|
| Date | 2011-08-31 10:06 +0000 |
| Message-ID | <j3l13j$bt6$1@smc.vnet.net> |
| In reply to | #4654 |
John Fultz That mesh-tubes effect is nice: I wonder if it shows up in 3d models? Is there any way to get Mathematica to send surface colors to a 3d model that will be seen by other modeling software? Roger Bagula
[toc] | [prev] | [next] | [standalone]
| From | Roger Bagula <roger.bagula@gmail.com> |
|---|---|
| Date | 2011-08-31 10:07 +0000 |
| Message-ID | <j3l14h$bth$1@smc.vnet.net> |
| In reply to | #4654 |
John Furth,
The Mesh Tubes use a lot of memory
( as seen in the model being much larger as output),
so that the real time effect
doesn't work as well in 8.
The last/ first tube mesh line doesn't print:
Clear[g1, g2, x1, x2x3, x, y, z, t, p]
x1 = Cos[t]; x2 = Cos[t + 2*Pi/3]; x3 = Cos[t - 2*Pi/3];
z = x1*p;
x = x2*(-1 + p);
y = x3*(1 - p);
g1 = ParametricPlot3D[{x, y, z}, {t, 0, 2*Pi}, {p, 0, 1},
Axes -> False, Boxed -> False, PlotPoints -> 60,
MeshStyle -> {{GrayLevel[.9], Tube[0.025]}}]
g2 = ParametricPlot3D[{x, y, -z}, {t, 0, 2*Pi}, {p, 0, 1},
Axes -> False, Boxed -> False, PlotPoints -> 60,
MeshStyle -> {{GrayLevel[.9], Tube[0.025]}}]
Show[{g1, g2}]
Export["Ruledellipsedouble_tubelines.stl", %]
For getting color out the web suggests the *.coff
file format: Mathematica gives
Export::infer: "Cannot infer format of file \!\
(\"Ruledellipsedouble_tubelines.coff\"\)."
but will do an *.off file.
Roger Bagula
[toc] | [prev] | [next] | [standalone]
| From | Roger Bagula <roger.bagula@gmail.com> |
|---|---|
| Date | 2011-09-01 10:06 +0000 |
| Message-ID | <j3nleo$p1j$1@smc.vnet.net> |
| In reply to | #4665 |
Getting the color out... *.mtl files are generated when you make a Mathematica *.obj export. They are said to contain the color information. *.3ds will transfer color and are made with Mathematica as well. There is still the problem of what the printers call: Non-Manifold model outputs in Mathematica. It appears that Mathematica models leave holes that 3d Printers can't stand. They all have to be repaired and mesh holes closed. They all deal with me like I'm the village idiot for having such bad mesh files, LOL. Roger Bagula
[toc] | [prev] | [standalone]
Back to top | Article view | comp.soft-sys.math.mathematica
csiph-web