Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.os.linux.networking > #3403 > unrolled thread

Toshiba NB10-A6104 wired ethernet interface

Started byJKB <jkb@koenigsberg.invalid>
First post2015-06-25 20:21 +0000
Last post2015-06-25 21:13 +0000
Articles 3 — 2 participants

Back to article view | Back to comp.os.linux.networking

Contents

  Toshiba NB10-A6104 wired ethernet interface JKB <jkb@koenigsberg.invalid> - 2015-06-25 20:21 +0000
    Re: Toshiba NB10-A6104 wired ethernet interface Andrzej Adam Filip <anfi@onet.eu> - 2015-06-25 22:39 +0200
      Re: Toshiba NB10-A6104 wired ethernet interface JKB <jkb@koenigsberg.invalid> - 2015-06-25 21:13 +0000

#3403 — Toshiba NB10-A6104 wired ethernet interface

FromJKB <jkb@koenigsberg.invalid>
Date2015-06-25 20:21 +0000
SubjectToshiba NB10-A6104 wired ethernet interface
Message-ID<slrnmoooln.mu.jkb@rayleigh.systella.fr>
	Hello,

	I'm trying to install a NB10 laptop with Debian/Jessie. Current
	kernel is Debian 4.0.5-1 (2015-06-16) x86_64 GNU/Linux.

	All system but wired ethernet works fine. Indeed, ethernet MAC
	address is ff:ff:ff:ff:ff:ff.

	Wired interface is known and is initialized as:
[    1.006668] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.006696] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
ASPM control
[    1.006878] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
unknown MAC, using family default
[    1.016941] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
rtl_chip cmd_cond == 1 (loop: 100, delay: 100).
[    1.017900] r8169 0000:03:00.0 eth0: RTL8101e at 0xffffc90000340000,
ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 88

	I have tried to change MAC address without any success. Of course, I
	have installed realtek firmware.

	Is this trouble a known issue ? I haven't found any information.

	Best regards,

	JKB

-- 
Si votre demande me parvient sur carte perforée, je titiouaillerai très
volontiers une réponse...
=> http://grincheux.de-charybde-en-scylla.fr
=> http://loubardes.de-charybde-en-scylla.fr

[toc] | [next] | [standalone]

#3404

FromAndrzej Adam Filip <anfi@onet.eu>
Date2015-06-25 22:39 +0200
Message-ID<87cycpnl3f@f6p4.huge.strangled.net>
In reply to#3403
JKB <jkb@koenigsberg.invalid> wrote:
> 	Hello,
>
> 	I'm trying to install a NB10 laptop with Debian/Jessie. Current
> 	kernel is Debian 4.0.5-1 (2015-06-16) x86_64 GNU/Linux.
>
> 	All system but wired ethernet works fine. Indeed, ethernet MAC
> 	address is ff:ff:ff:ff:ff:ff.
>
> 	Wired interface is known and is initialized as:
> [    1.006668] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [    1.006696] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
> ASPM control
> [    1.006878] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
> unknown MAC, using family default
> [    1.016941] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
> rtl_chip cmd_cond == 1 (loop: 100, delay: 100).
> [    1.017900] r8169 0000:03:00.0 eth0: RTL8101e at 0xffffc90000340000,
> ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 88
>
> 	I have tried to change MAC address without any success. Of course, I
> 	have installed realtek firmware.
>
> 	Is this trouble a known issue ? I haven't found any information.
>
> 	Best regards,
>
> 	JKB

Have you tested the hint below? [I have *not* tested it myself]:

https://unofficialnb10.wordpress.com/2014/03/31/toshiba-nb10-booting-linux/
| The jessie (Debian testing) installer would boot and run via use of the
| ‘noapic’ option at the kernel commandline. It could successfully use both
| network interfaces (ethernet+wireless). I installed this.

-- 
[Andrew] Andrzej A. Filip  -  https://www.linkedin.com/in/andfil

[toc] | [prev] | [next] | [standalone]

#3405

FromJKB <jkb@koenigsberg.invalid>
Date2015-06-25 21:13 +0000
Message-ID<slrnmoorn5.ave.jkb@rayleigh.systella.fr>
In reply to#3404
Le Thu, 25 Jun 2015 22:39:23 +0200,
Andrzej Adam Filip <anfi@onet.eu> écrivait :
> JKB <jkb@koenigsberg.invalid> wrote:
>> 	Hello,
>>
>> 	I'm trying to install a NB10 laptop with Debian/Jessie. Current
>> 	kernel is Debian 4.0.5-1 (2015-06-16) x86_64 GNU/Linux.
>>
>> 	All system but wired ethernet works fine. Indeed, ethernet MAC
>> 	address is ff:ff:ff:ff:ff:ff.
>>
>> 	Wired interface is known and is initialized as:
>> [    1.006668] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>> [    1.006696] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
>> ASPM control
>> [    1.006878] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
>> unknown MAC, using family default
>> [    1.016941] r8169 0000:03:00.0 (unnamed net_device) (uninitialized):
>> rtl_chip cmd_cond == 1 (loop: 100, delay: 100).
>> [    1.017900] r8169 0000:03:00.0 eth0: RTL8101e at 0xffffc90000340000,
>> ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 88
>>
>> 	I have tried to change MAC address without any success. Of course, I
>> 	have installed realtek firmware.
>>
>> 	Is this trouble a known issue ? I haven't found any information.
>>
>> 	Best regards,
>>
>> 	JKB
>
> Have you tested the hint below? [I have *not* tested it myself]:
>
> https://unofficialnb10.wordpress.com/2014/03/31/toshiba-nb10-booting-linux/
>| The jessie (Debian testing) installer would boot and run via use of the
>| ‘noapic’ option at the kernel commandline. It could successfully use both
>| network interfaces (ethernet+wireless). I installed this.
>

	I have tryied with noapic, and in a second time with noapic nolapic
	acpi=off before writing here. In first case, kernel boots but MAC address
	is ff:ff:ff:ff:ff:ff. In second one, it doesn't boot.

	Regards,

	JKB


-- 
Si votre demande me parvient sur carte perforée, je titiouaillerai très
volontiers une réponse...
=> http://grincheux.de-charybde-en-scylla.fr
=> http://loubardes.de-charybde-en-scylla.fr

[toc] | [prev] | [standalone]

Back to top | Article view | comp.os.linux.networking

csiph-web