Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.os.linux.networking > #4252

Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share

From Dan Purgert <dan@djph.net>
Newsgroups comp.os.linux.networking
Subject Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share
Date 2018-09-03 20:16 +0000
Organization A noiseless patient Spider
Message-ID <slrnpor5k2.u91.dan@xps-linux.djph.net> (permalink)
References <vpWdnWVJDNYrqhHGnZ2dnUU78IvNnZ2d@brightview.co.uk> <slrnpoq3tk.u91.dan@xps-linux.djph.net> <KtOdnWT7j_vWDxDGnZ2dnUU78IPNnZ2d@brightview.co.uk>

Show all headers | View raw


NY wrote:
> "Dan Purgert" <dan@djph.net> wrote in message 
> news:slrnpoq3tk.u91.dan@xps-linux.djph.net...
>> NY wrote:
>>> [...]
>>> I was going to run Wireshark on the Ubuntu PC, which would mean it
>>> would be on a LAN segment that would see all the traffic, but I can't
>>> find a pre-built .deb installation package for Wireshark.
>>
>> Should be in the repos. A simple 'sudo apt-get install wireshark' should
>> do it for you (note, the recommended approach of using it on Linux is to
>> add yourself to the wireshark group, rather than running wireshark as
>> root.  You'll need to logout/login for that new group to take effect)
>
> I found it. Up until today I'd been running Ubuntu in trial mode, because I 
> couldn't find a power supply (like a laptop uses) for the PC that I was 
> going to install on, so I was testing it on my laptop. The available 
> packages in trial mode are considerably less than in real install mode. I 
> found wireshark and got it running fine.

Um, no, theres no difference in the repos.
>
> As a matter of interest, can you set up a single display filter that only 
> shows traffic between two devices, or do you have to do it as four rules: 
> (src=A and dest=B) or (src=B and dest=A). I expected that this would be the 
> default action if I right-clicked on a packet from A to B and chose 
> "generate rule", but it simply created a src=A rule.

Should work as one rule.


-- 
|_|O|_| Registered Linux user #585947
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: 05CA 9A50 3F2E 1335 4DC5  4AEE 8E11 DDF3 1279 A281

Back to comp.os.linux.networking | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share "NY" <me@privacy.net> - 2018-09-02 20:18 +0100
  Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share Dan Purgert <dan@djph.net> - 2018-09-03 10:40 +0000
    Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share Jorgen Grahn <grahn+nntp@snipabacken.se> - 2018-09-03 14:55 +0000
      Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share Dan Purgert <dan@djph.net> - 2018-09-03 15:54 +0000
        Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share "NY" <me@privacy.net> - 2018-09-03 21:04 +0100
    Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share "NY" <me@privacy.net> - 2018-09-03 20:58 +0100
      Re: Ubuntu 18.04 acting as client to Windows "server" - can't see list of Windows PC's shares or connect to a share Dan Purgert <dan@djph.net> - 2018-09-03 20:16 +0000

csiph-web