Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.os.linux.networking > #2811

Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender

Cross-posted to 3 groups.

Show key headers only | View raw

DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> wrote:
>On Sat, 08 Mar 2014 23:56:19 -0900, floyd@apaflo.com (Floyd L. Davidson)
>Gave us:
>
>> Not in a home
>>environment with only minor potential for crosstalk.
>>
>
>  The crosstalk takes place at that connector.

Crosstalk takes place all along a cable.  "Near end crosstalk"
is certainly the most significant though, but that is due to
higher signal levels on the transmit pairs and lower signal
levels on the receive pairs than at other points along the
cable.

Certainly incorrectly done connectors would add to that.

>The amount of
>non-twisted wire in the termination itself even matters.  There is a
>spec for assemblers, and arriving at a properly constructed cat 6
>termination is not merely stuffing them in and crimping.

There should not be more than 13mm of untwisted wire at the
connector.

>  After the pairs are matched up to the right pins, the length of the
>'combed straight' set of wires *must* be trimmed back such that it
>barely makes it all the way into the connector.
>
>  Otherwise, it will not perform out to full spec.
>
>  The best connectorization for cat6 includes a SHIELDED termination
>shroud and shielded cable.

Shielded Twisted Pair has it's uses, but generally speaking is
not better than UTP.  The length that can be used is reduced,
due to the added capacitance.  STP is used in more severe
environments.

For example, in a telecommunications center where there are
cable racks with literally thousands of pair of wires, long runs
between different rows of racks will uses shielded pairs, while
short runs within the same row of racks will use unshielded
pairs.  That is partialy due to the way grounding systems are
designed, and if for some reason the ground at one end of a row
is provided differently tha the ground at the other end, then
STP would be used instead of UTP.

>  But yeah...  it will not halt a connection at someone's home.  It just
>will not pass the data at the full rate.  Essentially un-noticed since
>that is not where the bottleneck is.

That is not correct.  The point is that the any crosstalk would
be so rare as to be insignificant.

-- 
Floyd L. Davidson                         http://www.apaflo.com/
Ukpeagvik (Barrow, Alaska)                      floyd@apaflo.com

Back to comp.os.linux.networking | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 00:53 -0800
  Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Dan Purgert <dan@djph.net> - 2014-03-08 07:46 -0500
    Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 10:56 -0800
    Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 10:58 -0800
      Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 11:51 -0800
      Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Dan Purgert <dan@djph.net> - 2014-03-08 15:25 -0500
      Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Scott Hemphill <hemphill@hemphills.net> - 2014-03-08 21:07 -0500
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Scott Hemphill <hemphill@hemphills.net> - 2014-03-08 21:18 -0500
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-08 20:49 -0800
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Mark Lloyd <mark@this.is.not.email.invalid> - 2014-03-09 10:50 -0500
      Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Bit Twister <BitTwister@mouse-potato.com> - 2014-03-09 02:49 +0000
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-08 20:51 -0800
          Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-08 23:56 -0900
            Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-09 09:39 -0700
              Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-09 11:07 -0800
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-08 23:20 -0900
          Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-09 07:40 -0700
            Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Dan Purgert <dan@djph.net> - 2014-03-09 21:19 -0400
          Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-09 09:21 -0700
            Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-09 10:57 -0800
              Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-09 16:07 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-09 17:05 -0800
            Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-10 10:40 -0700
              Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-10 12:06 -0800
              Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-10 20:07 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-11 02:36 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-11 19:30 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-11 23:13 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-12 21:30 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-13 04:44 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-13 20:20 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-13 20:30 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-13 22:59 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender mechanic <mechanic@example.net> - 2014-03-14 11:31 +0000
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-14 21:50 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-14 04:31 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender mechanic <mechanic@example.net> - 2014-03-14 13:45 +0000
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-14 07:26 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender John Hasler <jhasler@newsguy.com> - 2014-03-14 11:07 -0500
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-14 10:23 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-14 22:02 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-14 21:53 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-15 09:49 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender mechanic <mechanic@example.net> - 2014-03-15 10:45 +0000
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-15 09:57 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-15 12:28 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-15 14:02 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-15 14:22 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-15 21:55 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-15 21:25 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-14 21:54 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-14 21:58 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-11 19:33 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-11 23:36 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender ceed <ceed@is.indeed.invalid> - 2014-03-12 17:05 +0000
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-12 21:48 -0700
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-13 04:46 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Eef Hartman <E.J.M.Hartman@tudelft.nl> - 2014-03-12 19:27 +0000
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender floyd@apaflo.com (Floyd L. Davidson) - 2014-03-12 13:32 -0800
                Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-13 19:18 -0700
    Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 10:59 -0800
    Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 11:01 -0800
      Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Dan Purgert <dan@djph.net> - 2014-03-08 15:36 -0500
        Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-08 19:06 -0800
          Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender DecadentLinuxUserNumeroUno <DLU1@DecadentLinuxUser.org> - 2014-03-08 20:54 -0800
          Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Dan Purgert <dan@djph.net> - 2014-03-09 08:03 -0400
            Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Liam O'Connor <liamoconnor@example.com> - 2014-03-09 07:56 -0700
  Re: How to set up a spare Linksys WRT54Gv2 as a wired access point network extender Big Bad Bob <BigBadBob-at-mrp3-dot-com@testing.local> - 2014-03-08 17:42 -0800

csiph-web